GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1751 to 2000 of 4611 total

per page
Page:
  2. 6
  3. 7
  4. 8
  5. 9
  6. 10

Set Descending Direction

  1. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150404FN KCK05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408FN KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412FN KCK05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KT315 » 12.70 15.50 1.20 4.76 5.16
    DNMG150604FN KCK05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608FN KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FN

  2. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150404FW KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FW KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FW KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408FW KC5010 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCP05 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCP10 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCP10B » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150408FW KT315 » 12.70 15.50 0.41 4.76 5.16
    DNMG150604FW KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FW KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608FW KC5010 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCP05 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCP10 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCP10B » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150608FW KT315 » 12.70 15.50 0.41 6.35 5.16
    DNMG-FW

  3. DNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150404MN KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MN KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MN KCP10B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MN KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MN KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MN KCP30 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408MN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP40 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412MN KCP05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MN KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MN KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MN KCP25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MN KCP25B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MN KCP40 » 12.70 15.50 1.20 4.76 5.16
    DNMG150416MN KCP10 » 12.70 15.50 1.60 4.76 5.16
    DNMG150416MN KCP25 » 12.70 15.50 1.60 4.76 5.16
    DNMG150604MN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MN KCP30 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608MN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MN

  4. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150404MP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCM15 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCM25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCM35 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150408MP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412MP KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MP KCM15 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MP KCM25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MP KCU10 » 12.70 15.50 1.20 - -
    DNMG150604MP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCM15 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCM25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCM35 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MP

  5. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150404MS K313 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150404MS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408MS K313 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150408MS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412MS KC5510 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MS KCU10 » 12.70 15.50 1.20 - -
    DNMG150412MS KCU25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150604MS K313 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608MS K313 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MS

  6. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150404UP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCM15 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCM25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCU10 » 12.70 15.50 0.40 - -
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150412UP KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCM15 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCM25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCM35 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCU10 » 12.70 15.50 1.20 - -
    DNMG150604UP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604UP KCM15 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604UP KCM25 » 12.70 15.50 0.40 6.35 5.16
    DNMG-UP

  7. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150412CT KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCU10 » 12.70 15.50 1.20 - -
    DNMG150604CT KC5010 » 12.70 15.50 0.34 6.35 5.16
    DNMG150604CT KCP10 » 12.70 15.50 0.34 6.35 5.16
    DNMG150608CT KC5010 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP05 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10B » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP25 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCU10 » 12.70 15.50 0.74 - -
    DNMG-CT

  8. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150408FF KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150408FF KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150604FF KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FF KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608FF KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150608FF KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FF

  9. DNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150408MW KCP05 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408MW KCP10 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408MW KCP10B » 12.70 15.50 0.41 4.76 5.16
    DNMG150408MW KCP25 » 12.70 15.50 0.41 4.76 5.16
    DNMG150412MW KCP05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MW KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MW KCP25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150608MW KC9225 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608MW KCP05 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608MW KCP10 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608MW KCP10B » 12.70 15.50 0.41 6.35 5.16
    DNMG150608MW KCP25 » 12.70 15.50 0.41 6.35 5.16
    DNMG-MW

  10. DNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150408RN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412RN KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RN KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RN KCP25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RN KCP25B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RN KCP30 » 12.70 15.50 1.20 4.76 5.16
    DNMG150416RN KCP10 » 12.70 15.50 1.60 4.76 5.16
    DNMG150416RN KCP25 » 12.70 15.50 1.60 4.76 5.16
    DNMG150608RN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG-RN

  11. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150408RP KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP40 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150412RP KCK15 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCK20 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCM25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCM35 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCP05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCP25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCP25B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCP30 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCP40 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCU10 » 12.70 15.50 1.20 - -
    DNMG150416RP KCK20 » 12.70 15.50 1.60 4.76 5.16
    DNMG150416RP KCU10 » 12.70 15.50 1.60 - -
    DNMG150608RP KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG-RP

  12. DNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150408UN KCK05 » 12.70 15.50 0.80 - -
    DNMG150408UN KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UN KCK15B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UN KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412UN KCK05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UN KCK15 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UN KCK20 » 12.70 15.50 1.20 4.76 5.16
    DNMG150416UN KCK15 » 12.70 15.50 1.60 4.76 5.16
    DNMG150416UN KCK20 » 12.70 15.50 1.60 4.76 5.16
    DNMG-UN

Items 1751 to 2000 of 4611 total

per page
Page:
  2. 6
  3. 7
  4. 8
  5. 9
  6. 10

Set Descending Direction
Newsletter
Shop By

Shopping Options

Manufacturer
  1. Kennametal (4611)
ISO Insert Range
  1. Beyond Premium (4611)
Material Machining
  1. Steel (3005)
  2. Stainless Steel (1512)
  3. Cast Iron (1598)
  4. Aluminium (127)
  5. HRSA (1132)
  6. Universal (920)
Insert Type
  1. Negative (2618)
  2. Positive (1993)
Type of Cut
  1. Fine Finishing (19)
  2. Finishing (2068)
  3. Wiper Finishing (146)
  4. Medium (1046)
  5. Wiper Medium (86)
  6. Medium Roughing (5)
  7. Rough Positive (109)
  8. Rough (858)
  9. Rough Single Sided (274)
Tip Style
  1. CCGT (58)
  2. CCMT (293)
  3. CCMW (5)
  4. CDG (6)
  5. CDHBS (21)
  6. CDHHS (18)
  7. CDT (2)
  8. CNGG (30)
  9. CNGP (19)
  10. CNMA (27)
  11. CNMG (492)
  12. CNMM (130)
  13. CPG (2)
  14. CPGH (22)
  15. CPGT (32)
  16. CPMT (182)
  17. DCGT (26)
  18. DCMT (202)
  19. DNGG (23)
  20. DNGP (23)
  21. DNMA (17)
  22. DNMG (474)
  23. DNMM (26)
  24. DNMS (2)
  25. DPGT (48)
  26. DPMT (82)
  27. RCGH (4)
  28. RCGT (22)
  29. RCGX (2)
  30. RCMT (68)
  31. RNMA (6)
  32. RNMG (28)
  33. RPGT (3)
  34. SCMT (145)
  35. SCMW (4)
  36. SNGG (7)
  37. SNGP (4)
  38. SNMA (23)
  39. SNMG (288)
  40. SNMM (84)
  41. SNMS (5)
  42. SPGT (4)
  43. SPMT (51)
  44. TCGT (28)
  45. TCMT (197)
  46. TCMW (2)
  47. TDHB (18)
  48. TDHH (14)
  49. TNGG (8)
  50. TNGP (5)
  51. TNMA (22)
  52. TNMG (342)
  53. TNMM (34)
  54. TNMP (12)
  55. TNMS (5)
  56. TPCB (11)
  57. TPCG (7)
  58. TPCH (4)
  59. TPGH (10)
  60. TPGT (45)
  61. TPMT (151)
  62. VBGT (39)
  63. VBMT (116)
  64. VNGG (23)
  65. VNGP (9)
  66. VNMG (128)
  67. VNMP (8)
  68. VNMS (9)
  69. WCMT (10)
  70. WNGG (9)
  71. WNMA (18)
  72. WNMG (255)
  73. WPGT (3)
  74. WPGTS (4)
  75. WPMT (30)
  76. WPMTS (4)
Radius°
  1. 0.05 (12)
  2. 0.10 (64)
  3. 0.20 (261)
  4. 0.34 (2)
  5. 0.40 (1131)
  6. 0.74 (6)
  7. 0.80 (1617)
  8. 1.14 (7)
  9. 1.20 (899)
  10. 1.60 (360)
  11. 2.40 (87)
  12. 3.20 (6)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...