GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 492 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

  1. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FF KC5010 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FF KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FF KCU10 » 9.53 9.67 0.40 - -
    CNMG090304FF KT315 » 9.53 9.67 0.40 3.18 3.81
    CNMG090308FF KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FF KCP10 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FF KCU10 » 9.53 9.67 0.80 - -
    CNMG120404FF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FF KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408FF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCU10 » 12.70 12.90 0.80 - -
    CNMG120408FF KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG-FF

  2. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FN KCK05 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FN KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FN KT315 » 9.53 9.67 0.40 3.18 3.81
    CNMG090308FN KCK05 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FN KCP10 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FN KT315 » 9.53 9.67 0.80 3.18 3.81
    CNMG120402FN KC5010 » 12.70 12.90 0.20 4.76 5.16
    CNMG120402FN KCU10 » 12.70 12.90 0.20 - -
    CNMG120402FN KT315 » 12.70 12.90 0.20 4.76 5.16
    CNMG120404FN KCK05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408FN KCK05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412FN KCK05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KT315 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416FN KCK05 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416FN KCP10 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416FN KCP25 » 12.70 12.90 1.60 4.76 5.16
    CNMG-FN

  3. CNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090304MN KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304MN KCP25 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304MN KCP25B » 9.53 9.67 0.40 3.18 3.81
    CNMG090304MN KCP30 » 9.53 9.67 0.40 3.18 3.81
    CNMG090308MN KCP10 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MN KCP10B » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MN KCP25 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MN KCP25B » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MN KCP30 » 9.53 9.67 0.80 3.18 3.81
    CNMG090312MN KCP25 » 9.53 9.67 1.20 3.18 3.81
    CNMG120404MN KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP30 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408MN KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP30 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP40 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412MN KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP30 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP40 » 12.70 12.90 1.20 4.76 5.16
    CNMG-MN

  4. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090308MP KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCM15 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCM25 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCU10 » 9.53 9.67 0.80 - -
    CNMG120404MP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCM15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCM25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCM35 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCU10 » 12.70 12.90 0.40 - -
    CNMG120408MP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCM35 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MP KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412MP KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KC5025 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCM15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCM25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCM35 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCU10 » 12.70 12.90 1.20 - -
    CNMG120412MP KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG-MP

  5. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120401MS KCU10 » 12.70 12.90 0.10 - -
    CNMG120401MS KCU25 » 12.70 12.90 0.10 4.76 5.16
    CNMG120402MS K313 » 12.70 12.90 0.20 4.76 5.16
    CNMG120402MS KCU25 » 12.70 12.90 0.20 4.76 5.16
    CNMG120404MS K313 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MS KCU10 » 12.70 12.90 0.40 - -
    CNMG120404MS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408MS K313 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MS KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412MS K313 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MS KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG-MS

  6. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCM15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FP KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408FP KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412FP KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FP KCM15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FP KCU10 » 12.70 12.90 1.20 - -
    CNMG-FP

  7. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FW KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FW KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408FW KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FW KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FW KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FW KCU10 » 12.70 12.90 0.80 - -
    CNMG120408FW KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412FW KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FW KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FW KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FW KCU10 » 12.70 12.90 1.20 - -
    CNMG120412FW KT315 » 12.70 12.90 1.20 4.76 5.16
    CNMG-FW

  8. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120404RP KCK20 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCM15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCM25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404RP KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408RP KCK05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCK15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCK15B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCK20 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCM35 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP30 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP40 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408RP KCU25 » 12.70 12.90 0.80 - -
    CNMG120412RP KCK05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCK15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCK15B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCK20 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCM15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCM25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCM35 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP30 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP40 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCU10 » 12.70 12.90 1.20 - -
    CNMG120412RP KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG-RP

  9. CNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120404UN KCK05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK15B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK20 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408UN KCK05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UN KCK15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UN KCK15B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UN KCK20 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412UN KCK05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK15B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK20 » 12.70 12.90 1.20 4.76 5.16
    CNMG-UN

  10. CNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120404UP KCM15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UP KCM25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408UP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UP KCM35 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412UP KCM15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UP KCM25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UP KCM35 » 12.70 12.90 1.20 4.76 5.16
    CNMG-UP

  11. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG120412CT KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120416CT KCP10 » 12.70 12.90 1.60 4.76 5.16
    CNMG-CT

  12. CNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120408MW KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MW KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MW KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MW KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MW KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120412MW KC9225 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MW KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MW KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MW KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MW KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MW KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG-MW

  13. CNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120408RN KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP30 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP40 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412RN KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP30 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP40 » 12.70 12.90 1.20 4.76 5.16
    CNMG-RN

Items 1 to 250 of 492 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Tip Style: CNMG Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (492)
ISO Insert Range
  1. Beyond Premium (492)
Material Machining
  1. Steel (337)
  2. Stainless Steel (163)
  3. Cast Iron (151)
  4. HRSA (96)
  5. Universal (85)
Insert Type
  1. Negative (492)
Type of Cut
  1. Fine Finishing (19)
  2. Finishing (62)
  3. Wiper Finishing (16)
  4. Medium (153)
  5. Wiper Medium (11)
  6. Rough Positive (109)
  7. Rough (122)
Tip Style
  1. CCGT (58)
  2. CCMT (293)
  3. CCMW (5)
  4. CDG (6)
  5. CDHBS (21)
  6. CDHHS (18)
  7. CDT (2)
  8. CNGG (30)
  9. CNGP (19)
  10. CNMA (27)
  11. CNMM (130)
  12. CPG (2)
  13. CPGH (22)
  14. CPGT (32)
  15. CPMT (182)
  16. DCGT (26)
  17. DCMT (202)
  18. DNGG (23)
  19. DNGP (23)
  20. DNMA (17)
  21. DNMG (474)
  22. DNMM (26)
  23. DNMS (2)
  24. DPGT (48)
  25. DPMT (82)
  26. RCGH (4)
  27. RCGT (22)
  28. RCGX (2)
  29. RCMT (68)
  30. RNMA (6)
  31. RNMG (28)
  32. RPGT (3)
  33. SCMT (145)
  34. SCMW (4)
  35. SNGG (7)
  36. SNGP (4)
  37. SNMA (23)
  38. SNMG (288)
  39. SNMM (84)
  40. SNMS (5)
  41. SPGT (4)
  42. SPMT (51)
  43. TCGT (28)
  44. TCMT (197)
  45. TCMW (2)
  46. TDHB (18)
  47. TDHH (14)
  48. TNGG (8)
  49. TNGP (5)
  50. TNMA (22)
  51. TNMG (342)
  52. TNMM (34)
  53. TNMP (12)
  54. TNMS (5)
  55. TPCB (11)
  56. TPCG (7)
  57. TPCH (4)
  58. TPGH (10)
  59. TPGT (45)
  60. TPMT (151)
  61. VBGT (39)
  62. VBMT (116)
  63. VNGG (23)
  64. VNGP (9)
  65. VNMG (128)
  66. VNMP (8)
  67. VNMS (9)
  68. WCMT (10)
  69. WNGG (9)
  70. WNMA (18)
  71. WNMG (255)
  72. WPGT (3)
  73. WPGTS (4)
  74. WPMT (30)
  75. WPMTS (4)
Radius°
  1. 0.10 (2)
  2. 0.20 (5)
  3. 0.40 (63)
  4. 0.80 (156)
  5. 1.20 (162)
  6. 1.60 (100)
  7. 2.40 (4)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...