GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 1132 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction

  1. CCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060201LF KC5025 » 6.35 6.45 0.10 2.38 2.80
    CCGT060201LF KCU10 » 6.35 6.45 0.10 - -
    CCGT060202LF KC5025 » 6.35 6.45 0.20 2.38 2.80
    CCGT060202LF KCU10 » 6.35 6.45 0.20 - -
    CCGT060204LF KC5025 » 6.35 6.45 0.40 2.38 2.80
    CCGT060204LF KCU10 » 6.35 6.45 0.40 - -
    CCGT060208LF KC5010 » 6.35 6.45 0.80 2.38 2.80
    CCGT060208LF KCU10 » 6.35 6.45 0.80 - -
    CCGT0602X0LF KC5025 » 6.35 6.45 0.04 2.38 2.80
    CCGT09T301LF KC5025 » 9.53 9.67 0.10 3.97 4.40
    CCGT09T302LF KC5025 » 9.53 9.67 0.20 3.97 4.40
    CCGT09T302LF KCU10 » 9.53 9.67 0.20 - -
    CCGT09T304LF KCU10 » 9.53 9.67 0.40 - -
    CCGT09T308LF KC5025 » 9.53 9.67 0.80 3.97 4.40
    CCGT09T308LF KCU10 » 9.53 9.67 0.80 - -
    CCGT09T3X0LF KC5025 » 9.53 9.67 0.04 3.97 4.40
    CCGT-LF

  2. CCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060202HP K313 » 6.35 6.45 0.20 2.38 2.80
    CCGT060202HP KCU25 » 6.35 6.45 0.20 2.38 2.80
    CCGT060204HP K313 » 6.35 6.45 0.40 2.38 2.80
    CCGT060204HP KCU10 » 6.35 6.45 0.40 - -
    CCGT060204HP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCGT060208HP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CCGT09T302HP K313 » 9.53 9.67 0.20 3.97 4.40
    CCGT09T302HP KCU10 » 9.53 9.67 0.20 - -
    CCGT09T302HP KCU25 » 9.53 9.67 0.20 3.97 4.40
    CCGT09T304HP K313 » 9.53 9.67 0.40 3.97 4.40
    CCGT09T304HP KCU10 » 9.53 9.67 0.40 - -
    CCGT09T304HP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCGT120402HP KCU10 » 12.70 12.90 0.20 - -
    CCGT120402HP KCU25 » 12.70 12.90 0.20 4.76 5.50
    CCGT120404HP K313 » 12.70 12.90 0.40 4.76 5.50
    CCGT120404HP KCU10 » 12.70 12.90 0.40 - -
    CCGT120404HP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCGT120408HP K313 » 12.70 12.90 0.80 4.76 5.50
    CCGT120408HP KCU10 » 12.70 12.90 0.80 - -
    CCGT120408HP KCU25 » 12.70 12.90 0.80 4.76 5.50
    CCGT-HP

  3. CCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT060202FP KCU10 » 6.35 6.45 0.20 2.38 2.80
    CCMT060202FP KCU25 » 6.35 6.45 0.20 2.38 2.80
    CCMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060208FP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CCMT060208FP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CCMT09T302FP KCU10 » 9.53 9.67 0.20 3.97 4.40
    CCMT09T302FP KCU25 » 9.53 9.67 0.20 3.97 4.40
    CCMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T308FP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308FP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CCMT120404FP KCU10 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCMT120408FP KCU10 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408FP KCU25 » 12.70 12.90 0.80 4.76 5.50
    CCMT-FP

  4. CCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT060204MP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT09T304MP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T308MP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CCMT120408MP KCU10 » 12.70 12.90 0.80 4.76 5.50
    CCMT-MP

  5. CCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CCMT09T304MW KCU10 » 9.53 9.67 0.40
    CCMT09T308MW KCU10 » 9.53 9.67 0.80
    CCMT120404MW KCU10 » 12.70 12.90 0.40
    CCMT120408MW KCU10 » 12.70 12.90 0.80
    CCMT-MW

  6. CDG-R

    Positive ISO insert for Finishing machining.

    Product Code D T W S  
    CDG127050R KC5010 » 3.96 0.64 0.51 1.27
    CDG127064R KC5010 » 3.96 1.02 0.64 1.27
    CDG127076R KC5010 » 3.96 1.02 0.76 1.27
    CDG127076R KCU10 » 3.96 - - -
    CDG127102R KC5010 » 3.96 1.02 1.02 1.27
    CDG127102R KCU10 » 3.96 - - -
    CDG-R

  7. CDHBS

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHBS4T002 K313 » 3.97 4.03 0.18 1.02 2.13
    CDHBS4T002 KC5010 » 3.97 4.03 0.18 1.02 2.13
    CDHBS4T002 KC5025 » 3.97 4.03 0.18 1.02 2.13
    CDHBS4T002 KCU10 » 3.97 4.03 0.18 - -
    CDHBS4T002 KCU25 » 3.97 4.03 0.18 1.02 2.13
    CDHBS4T004 K313 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KCU10 » 3.97 4.03 0.38 - -
    CDHBS4T004 KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T0S0 KC5010 » 3.97 4.03 0.05 1.02 2.13
    CDHBS4T0S0 KC5025 » 3.97 4.03 0.05 1.02 2.13
    CDHBS4T0S0 KCU25 » 3.97 4.03 0.05 1.02 2.13
    CDHBS4T0X0 KCU10 » 3.97 4.03 0.05 - -
    CDHBS

  8. CDHHS-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHHS4T002L KC5010 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T002L KC5025 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T002L KCU10 » 3.97 4.03 0.18 - -
    CDHHS4T002L KCU25 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T004L KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004L KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-L

  9. CDHHS-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHHS4T002R KC5010 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T002R KC5025 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T002R KCU10 » 3.97 4.03 0.18 - -
    CDHHS4T002R KCU25 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T004R KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004R KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-R

  10. CDT-R

    Positive ISO insert for Finishing machining.

    Product Code D T S  
    CDT127005R KC5010 » 3.96 0.64 1.27
    CDT127005R KCU10 » 3.96 - -
    CDT-R

  11. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120401LF K313 » 12.70 12.90 0.10 4.76 5.16
    CNGG120401LF KC5010 » 12.70 12.90 0.10 4.76 5.16
    CNGG120401LF KC730 » 12.70 12.90 0.10 4.76 5.16
    CNGG120401LF KCU10 » 12.70 12.90 0.10 - -
    CNGG120402LF K313 » 12.70 12.90 0.20 4.76 5.16
    CNGG120402LF KC5010 » 12.70 12.90 0.20 4.76 5.16
    CNGG120402LF KC730 » 12.70 12.90 0.20 4.76 5.16
    CNGG120402LF KCU10 » 12.70 12.90 0.20 - -
    CNGG120404LF K313 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KC730 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KCU10 » 12.70 12.90 0.40 - -
    CNGG120408LF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KC730 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KCU10 » 12.70 12.90 0.80 - -
    CNGG120412LF KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNGG120412LF KC730 » 12.70 12.90 1.20 4.76 5.16
    CNGG120412LF KCU10 » 12.70 12.90 1.20 - -
    CNGG120416LF KC730 » 12.70 12.90 1.60 4.76 5.16
    CNGG160608LF KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNGG160608LF KCU10 » 15.88 16.12 0.80 - -
    CNGG160612LF KC5010 » 15.88 16.12 1.20 6.35 6.35
    CNGG160612LF KC730 » 15.88 16.12 1.20 6.35 6.35
    CNGG160612LF KCU10 » 15.88 16.12 1.20 - -
    CNGG-LF

  12. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120402FS KC5525 » 12.70 12.90 0.20 4.76 5.16
    CNGG120402FS KCU25 » 12.70 12.90 0.20 4.76 5.16
    CNGG120404FS K313 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404FS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNGG120408FS K313 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408FS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNGG-FS

  13. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGP120401 K10U » 12.70 12.90 0.10 - -
    CNGP120401 KCU10 » 12.70 12.90 0.10 - -
    CNGP120402 K10U » 12.70 12.90 0.20 - -
    CNGP120402 KCU10 » 12.70 12.90 0.20 - -
    CNGP120404 K10U » 12.70 12.90 0.40 - -
    CNGP120404 K313 » 12.70 12.90 0.40 4.76 5.16
    CNGP120404 KCU10 » 12.70 12.90 0.40 - -
    CNGP120408 K10U » 12.70 12.90 0.80 - -
    CNGP120408 K313 » 12.70 12.90 0.80 4.76 5.16
    CNGP120408 KCU10 » 12.70 12.90 0.80 - -
    CNGP120412 K10U » 12.70 12.90 1.20 - -
    CNGP120412 K313 » 12.70 12.90 1.20 4.76 5.16
    CNGP120416 K313 » 12.70 12.90 1.60 4.76 5.16
    CNGP

  14. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FF KC5010 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FF KCU10 » 9.53 9.67 0.40 - -
    CNMG090308FF KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FF KCU10 » 9.53 9.67 0.80 - -
    CNMG120404FF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCU10 » 12.70 12.90 0.40 - -
    CNMG120408FF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCU10 » 12.70 12.90 0.80 - -
    CNMG-FF

  15. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090308MP KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCU10 » 9.53 9.67 0.80 - -
    CNMG120404MP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCU10 » 12.70 12.90 0.40 - -
    CNMG120408MP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MP KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412MP KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KC5025 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCU10 » 12.70 12.90 1.20 - -
    CNMG120412MP KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416MP KC5010 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416MP KCU10 » 12.70 12.90 1.60 - -
    CNMG160608MP KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCU10 » 15.88 16.12 0.80 - -
    CNMG160612MP KC5010 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MP KCU10 » 15.88 16.12 1.20 - -
    CNMG160612MP KCU25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160616MP KC5010 » 15.88 16.12 1.60 6.35 6.35
    CNMG160616MP KCU10 » 15.88 16.12 1.60 - -
    CNMG190608MP KC5010 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MP KCU10 » 19.05 19.34 0.80 - -
    CNMG190612MP KC5010 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MP KCU10 » 19.05 19.34 1.20 - -
    CNMG190612MP KCU25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190616MP KC5010 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616MP KCU10 » 19.05 19.34 1.60 - -
    CNMG-MP

  16. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120401MS KCU10 » 12.70 12.90 0.10 - -
    CNMG120401MS KCU25 » 12.70 12.90 0.10 4.76 5.16
    CNMG120402MS K313 » 12.70 12.90 0.20 4.76 5.16
    CNMG120402MS KCU25 » 12.70 12.90 0.20 4.76 5.16
    CNMG120404MS K313 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MS KCU10 » 12.70 12.90 0.40 - -
    CNMG120404MS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408MS K313 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MS KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412MS K313 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MS KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416MS KCU10 » 12.70 12.90 1.60 - -
    CNMG120416MS KCU25 » 12.70 12.90 1.60 4.76 5.16
    CNMG160608MS KCU10 » 15.88 16.12 0.80 - -
    CNMG160608MS KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160612MS K313 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MS KCU10 » 15.88 16.12 1.20 - -
    CNMG160612MS KCU25 » 15.88 16.12 1.20 6.35 6.35
    CNMG190608MS KCU10 » 19.05 19.34 0.80 - -
    CNMG190608MS KCU25 » 19.05 19.34 0.80 6.35 7.93
    CNMG190612MS K313 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MS KCU25 » 19.05 19.34 1.20 - -
    CNMG190616MS KC5510 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616MS KC5525 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616MS KCU10 » 19.05 19.34 1.60 - -
    CNMG190616MS KCU25 » 19.05 19.34 1.60 6.35 7.93
    CNMG-MS

  17. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120402FN KC5010 » 12.70 12.90 0.20 4.76 5.16
    CNMG120402FN KCU10 » 12.70 12.90 0.20 - -
    CNMG-FN

  18. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG120412FP KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FP KCU10 » 12.70 12.90 1.20 - -
    CNMG-FP

  19. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FW KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCU10 » 12.70 12.90 0.40 - -
    CNMG120408FW KCU10 » 12.70 12.90 0.80 - -
    CNMG120412FW KCU10 » 12.70 12.90 1.20 - -
    CNMG-FW

  20. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120404RP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404RP KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408RP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408RP KCU25 » 12.70 12.90 0.80 - -
    CNMG120412RP KCU10 » 12.70 12.90 1.20 - -
    CNMG120412RP KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416RP KC5510 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416RP KCU10 » 12.70 12.90 1.60 - -
    CNMG120416RP KCU25 » 12.70 12.90 1.60 4.76 5.16
    CNMG160608RP KC5510 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RP KCU10 » 15.88 16.12 0.80 - -
    CNMG160608RP KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160612RP KC5510 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCU10 » 15.88 16.12 1.20 - -
    CNMG160612RP KCU25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160616RP KCU10 » 15.88 16.12 1.60 - -
    CNMG190612RP KCU10 » 19.05 19.34 1.20 - -
    CNMG190612RP KCU25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190616RP KCU10 » 19.05 19.34 1.60 - -
    CNMG190616RP KCU25 » 19.05 19.34 1.60 6.35 7.93
    CNMG-RP

  21. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG-CT

  22. CPG-L

    Positive ISO insert for Finishing machining.

    Product Code D T W  
    CPG190150L KCU10 » 6.32 1.65 1.52
    CPG-L

  23. CPG-R

    Positive ISO insert for Finishing machining.

    Product Code D T W  
    CPG190150R KCU10 » 6.32 1.65 1.52
    CPG-R

  24. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGH09T301 KC5010 » 9.53 9.67 0.10 3.97 4.40
    CPGH09T301 KC5025 » 9.53 9.67 0.10 3.97 4.40
    CPGH09T301 KCU10 » 9.53 9.67 0.10 - -
    CPGH09T302 KC5010 » 9.53 9.67 0.20 3.97 4.40
    CPGH09T302 KC5025 » 9.53 9.67 0.20 3.97 4.40
    CPGH09T302 KCU10 » 9.53 9.67 0.20 - -
    CPGH09T302 KCU25 » 9.53 9.67 0.20 3.97 4.40
    CPGH09T304 KC5010 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KC5025 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KCU10 » 9.53 9.67 0.40 - -
    CPGH09T304 KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGH

Items 1 to 250 of 1132 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: HRSA Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (1132)
ISO Insert Range
  1. Beyond Premium (1132)
Material Machining
  1. Steel (3005)
  2. Stainless Steel (1512)
  3. Cast Iron (1598)
  4. Aluminium (127)
  5. Universal (920)
Insert Type
  1. Negative (542)
  2. Positive (590)
Type of Cut
  1. Fine Finishing (8)
  2. Finishing (729)
  3. Wiper Finishing (41)
  4. Medium (264)
  5. Wiper Medium (8)
  6. Rough Positive (20)
  7. Rough (62)
Tip Style
  1. CCGT (36)
  2. CCMT (24)
  3. CDG (6)
  4. CDHBS (14)
  5. CDHHS (16)
  6. CDT (2)
  7. CNGG (30)
  8. CNGP (13)
  9. CNMG (96)
  10. CPG (2)
  11. CPGH (15)
  12. CPGT (20)
  13. CPMT (32)
  14. DCGT (20)
  15. DCMT (24)
  16. DNGG (23)
  17. DNGP (17)
  18. DNMG (92)
  19. DPGT (35)
  20. DPMT (16)
  21. RCGH (4)
  22. RCGT (15)
  23. RCGX (2)
  24. RCMT (21)
  25. RNMA (3)
  26. RNMG (1)
  27. RPGT (3)
  28. SCMT (13)
  29. SNGG (7)
  30. SNGP (2)
  31. SNMA (3)
  32. SNMG (27)
  33. SPGT (2)
  34. SPMT (6)
  35. TCGT (20)
  36. TCMT (49)
  37. TDHB (15)
  38. TDHH (14)
  39. TNGG (8)
  40. TNGP (2)
  41. TNMA (4)
  42. TNMG (61)
  43. TNMP (11)
  44. TPCB (10)
  45. TPCG (7)
  46. TPCH (4)
  47. TPGH (10)
  48. TPGT (32)
  49. TPMT (28)
  50. VBGT (29)
  51. VBMT (22)
  52. VNGG (23)
  53. VNGP (7)
  54. VNMG (38)
  55. VNMP (4)
  56. VNMS (2)
  57. WCMT (7)
  58. WNGG (9)
  59. WNMG (57)
  60. WPGT (3)
  61. WPGTS (4)
  62. WPMT (7)
  63. WPMTS (3)
Radius°
  1. 0.05 (8)
  2. 0.10 (49)
  3. 0.20 (172)
  4. 0.34 (1)
  5. 0.40 (337)
  6. 0.74 (2)
  7. 0.80 (336)
  8. 1.14 (2)
  9. 1.20 (111)
  10. 1.60 (36)
  11. 2.40 (3)
  12. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...