GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 342 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

  1. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110304FF KC5010 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FF KCU10 » 6.35 11.00 0.40 - -
    TNMG110308FF KC5010 » 6.35 11.00 0.80 3.18 2.26
    TNMG160404FF KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FF KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG160408FF KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FF KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG-FF

  2. TNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110304FN KCK05 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KCP10 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KCP25 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KT315 » 6.35 11.00 0.40 3.18 2.26
    TNMG110308FN KCP10 » 6.35 11.00 0.80 3.18 2.26
    TNMG110308FN KCP25 » 6.35 11.00 0.80 3.18 2.26
    TNMG160404FN KCK05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP10B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP25B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG160408FN KCK05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412FN KCK05 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP25B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KT315 » 9.53 16.50 1.20 4.76 3.81
    TNMG220404FN KCK05 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP10 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP25 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP25B » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KT315 » 12.70 22.00 0.40 4.76 5.16
    TNMG220408FN KCP05 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KCP10 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KCP10B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KCP25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KT315 » 12.70 22.00 0.80 4.76 5.16
    TNMG220412FN KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412FN KCP10B » 12.70 22.00 1.20 4.76 5.16
    TNMG220412FN KCP25 » 12.70 22.00 1.20 4.76 5.16
    TNMG-FN

  3. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160402MS KCU10 » 9.53 16.50 0.20 - -
    TNMG160402MS KCU25 » 9.53 16.50 0.20 4.76 3.81
    TNMG160404MS K313 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MS KC5510 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MS KCU10 » 9.53 16.50 0.40 - -
    TNMG160404MS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160408MS KCU10 » 9.53 16.50 0.80 - -
    TNMG160408MS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG220404MS KCU10 » 12.70 22.00 0.40 - -
    TNMG220404MS KCU25 » 12.70 22.00 0.40 4.76 5.16
    TNMG220408MS K313 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MS KCU10 » 12.70 22.00 0.80 - -
    TNMG220408MS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220412MS K313 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MS KC5510 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MS KC5525 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MS KCU10 » 12.70 22.00 1.20 - -
    TNMG220412MS KCU25 » 12.70 22.00 1.20 4.76 5.16
    TNMG-MS

  4. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160404FP KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KCM15 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG160408FP KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412FP KCM15 » 9.53 16.50 1.20 4.76 3.81
    TNMG220404FP KC5010 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FP KCM15 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FP KT315 » 12.70 22.00 0.40 4.76 5.16
    TNMG220408FP KC5010 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FP KT315 » 12.70 22.00 0.80 4.76 5.16
    TNMG-FP

  5. TNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160404FW KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FW KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FW KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FW KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FW KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG160408FW KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FW KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FW KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FW KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FW KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FW KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412FW KC5010 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FW KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FW KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FW KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FW KCU10 » 9.53 16.50 1.20 - -
    TNMG160412FW KT315 » 9.53 16.50 1.20 4.76 3.81
    TNMG-FW

  6. TNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160404MN KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP10B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP25B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP30 » 9.53 16.50 0.40 4.76 3.81
    TNMG160408MN KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MN KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MN KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MN KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MN KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MN KCP30 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412MN KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP25B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP30 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP40 » 9.53 16.50 1.20 4.76 3.81
    TNMG220404MN KCP10 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404MN KCP25 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404MN KCP25B » 12.70 22.00 0.40 4.76 5.16
    TNMG220404MN KCP30 » 12.70 22.00 0.40 4.76 5.16
    TNMG220408MN KCP10 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MN KCP10B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MN KCP25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MN KCP25B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MN KCP30 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MN KCP40 » 12.70 22.00 0.80 4.76 5.16
    TNMG220412MN KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MN KCP25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MN KCP25B » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MN KCP30 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MN KCP40 » 12.70 22.00 1.20 4.76 5.16
    TNMG-MN

  7. TNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160404MP KCM15 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MP KCM25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MP KCM35 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MP KCU10 » 9.53 16.50 0.40 - -
    TNMG160408MP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCM35 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCU10 » 9.53 16.50 0.80 - -
    TNMG160412MP KCM15 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MP KCM25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MP KCU10 » 9.53 16.50 1.20 - -
    TNMG220408MP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MP KCU10 » 12.70 22.00 0.80 - -
    TNMG220412MP KCM15 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MP KCM25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MP KCU10 » 12.70 22.00 1.20 - -
    TNMG-MP

  8. TNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160404UP KCM15 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404UP KCM25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160408UP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408UP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412UP KCM15 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412UP KCM25 » 9.53 16.50 1.20 4.76 3.81
    TNMG220408UP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UP KCM35 » 12.70 22.00 0.80 4.76 5.16
    TNMG-UP

  9. TNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160408MW KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MW KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MW KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MW KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160412MW KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MW KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MW KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MW KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG-MW

  10. TNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408RN KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RN KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RN KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RN KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RN KCP30 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412RN KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RN KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RN KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RN KCP25B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RN KCP30 » 9.53 16.50 1.20 4.76 3.81
    TNMG220408RN KCP10 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RN KCP10B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RN KCP25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RN KCP25B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RN KCP30 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RN KCP40 » 12.70 22.00 0.80 4.76 5.16
    TNMG220412RN KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RN KCP10B » 12.70 22.00 1.20 4.76 5.16
    TNMG-RN

  11. TNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408RP KC5510 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK15B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK20 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCP30 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCU10 » 9.53 16.50 0.80 - -
    TNMG160408RP KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412RP KCK20 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCM25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCM35 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCP25B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCU25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160416RP KCK20 » 9.53 16.50 1.60 4.76 3.81
    TNMG160416RP KCM25 » 9.53 16.50 1.60 4.76 3.81
    TNMG160416RP KCP10 » 9.53 16.50 1.60 4.76 3.81
    TNMG220408RP KCK15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCK20 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCP10 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCP10B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCP25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCP25B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCP30 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCP40 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCU10 » 12.70 22.00 0.80 - -
    TNMG220408RP KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG-RP

  12. TNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408UN KCK05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408UN KCK15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408UN KCK15B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408UN KCK20 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412UN KCK05 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412UN KCK15 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412UN KCK15B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412UN KCK20 » 9.53 16.50 1.20 4.76 3.81
    TNMG160416UN KCK05 » 9.53 16.50 1.60 4.76 3.81
    TNMG160416UN KCK15 » 9.53 16.50 1.60 4.76 3.81
    TNMG160416UN KCK20 » 9.53 16.50 1.60 4.76 3.81
    TNMG220408UN KCK05 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UN KCK15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UN KCK15B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UN KCK20 » 12.70 22.00 0.80 4.76 5.16
    TNMG-UN

  13. TNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220408CT KCP10 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408CT KCP10B » 12.70 22.00 0.80 4.76 5.16
    TNMG220412CT KCP05 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412CT KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG-CT

Items 1 to 250 of 342 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Tip Style: TNMG Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (342)
ISO Insert Range
  1. Beyond Premium (342)
Material Machining
  1. Steel (237)
  2. Stainless Steel (100)
  3. Cast Iron (91)
  4. HRSA (61)
  5. Universal (49)
Insert Type
  1. Negative (342)
Type of Cut
  1. Finishing (73)
  2. Wiper Finishing (17)
  3. Medium (77)
  4. Wiper Medium (8)
  5. Rough (167)
Tip Style
  1. CCGT (58)
  2. CCMT (293)
  3. CCMW (5)
  4. CDG (6)
  5. CDHBS (21)
  6. CDHHS (18)
  7. CDT (2)
  8. CNGG (30)
  9. CNGP (19)
  10. CNMA (27)
  11. CNMG (492)
  12. CNMM (130)
  13. CPG (2)
  14. CPGH (22)
  15. CPGT (32)
  16. CPMT (182)
  17. DCGT (26)
  18. DCMT (202)
  19. DNGG (23)
  20. DNGP (23)
  21. DNMA (17)
  22. DNMG (474)
  23. DNMM (26)
  24. DNMS (2)
  25. DPGT (48)
  26. DPMT (82)
  27. RCGH (4)
  28. RCGT (22)
  29. RCGX (2)
  30. RCMT (68)
  31. RNMA (6)
  32. RNMG (28)
  33. RPGT (3)
  34. SCMT (145)
  35. SCMW (4)
  36. SNGG (7)
  37. SNGP (4)
  38. SNMA (23)
  39. SNMG (288)
  40. SNMM (84)
  41. SNMS (5)
  42. SPGT (4)
  43. SPMT (51)
  44. TCGT (28)
  45. TCMT (197)
  46. TCMW (2)
  47. TDHB (18)
  48. TDHH (14)
  49. TNGG (8)
  50. TNGP (5)
  51. TNMA (22)
  52. TNMM (34)
  53. TNMP (12)
  54. TNMS (5)
  55. TPCB (11)
  56. TPCG (7)
  57. TPCH (4)
  58. TPGH (10)
  59. TPGT (45)
  60. TPMT (151)
  61. VBGT (39)
  62. VBMT (116)
  63. VNGG (23)
  64. VNGP (9)
  65. VNMG (128)
  66. VNMP (8)
  67. VNMS (9)
  68. WCMT (10)
  69. WNGG (9)
  70. WNMA (18)
  71. WNMG (255)
  72. WPGT (3)
  73. WPGTS (4)
  74. WPMT (30)
  75. WPMTS (4)
Radius°
  1. 0.20 (2)
  2. 0.40 (57)
  3. 0.80 (123)
  4. 1.20 (105)
  5. 1.60 (36)
  6. 2.40 (14)
  7. 3.20 (5)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...