GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1501 to 1750 of 4611 total

per page
Page:
  2. 5
  3. 6
  4. 7
  5. 8
  6. 9

Set Descending Direction

  1. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T308LF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCM35 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP05 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP10B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP25B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP30 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DCMT11T308LF KT315 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T312LF KCK05 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312LF KCK20 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312LF KCP10 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312LF KCP10B » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312LF KCP25 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312LF KT315 » 9.53 11.63 1.20 3.97 4.40
    DCMT150404LF KCK20 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404LF KCP10 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404LF KCP25 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404LF KCP25B » 12.70 15.50 0.40 4.76 5.50
    DCMT150404LF KT315 » 12.70 15.50 0.40 4.76 5.50
    DCMT150408LF KCK05 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCK20 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP25B » 12.70 15.50 0.80 4.76 5.50
    DCMT-LF

  2. DCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T308MF KCK15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCK15B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCK20 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCM35 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCP10B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCP25B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCP30 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T312MF KCK15 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312MF KCK20 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312MF KCM15 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312MF KCM25 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312MF KCP10 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312MF KCP10B » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312MF KCP25 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312MF KCP25B » 9.53 11.63 1.20 3.97 4.40
    DCMT-MF

  3. DCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T308MP KCK20 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MP KCM15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MP KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MP KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MP KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T312MP KCP10 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312MP KCP25 » 9.53 11.63 1.20 3.97 4.40
    DCMT-MP

  4. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T308MW KCK20 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MW KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MW KCU10 » 9.53 11.63 0.80 - -
    DCMT11T308MW KT315 » 9.53 11.63 0.80 3.97 4.40
    DCMT-MW

  5. DCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T308UF KCP05 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308UF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308UF KCP10B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308UF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT-UF

  6. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T312FP KCP10 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312FP KCU10 » 9.53 11.63 1.20 3.97 4.40
    DCMT150404FP KCM25 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404FP KCP10 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404FP KCP25 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404FP KCP25B » 12.70 15.50 0.40 4.76 5.50
    DCMT150404FP KCU10 » 12.70 15.50 0.40 4.76 5.50
    DCMT150408FP KCK20 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCM25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP05 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCU10 » 12.70 15.50 0.80 4.76 5.50
    DCMT-FP

  7. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG110402FS KC5525 » 9.52 11.63 0.20 4.76 3.81
    DNGG110402FS KCU25 » 9.52 11.63 0.20 4.76 3.81
    DNGG110404FS KC5510 » 9.52 11.63 0.40 4.76 3.81
    DNGG150401FS KC5510 » 12.70 15.50 0.10 4.76 5.16
    DNGG150402FS KC5510 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402FS KC5525 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402FS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNGG150404FS KC5525 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150408FS KC5525 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG150416FS KC5510 » 12.70 15.50 1.60 4.76 5.16
    DNGG150604FS KC5510 » 12.70 15.50 0.40 6.35 5.16
    DNGG150604FS KC5525 » 12.70 15.50 0.40 6.35 5.16
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG150608FS KC5510 » 12.70 15.50 0.80 6.35 5.16
    DNGG-FS

  8. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150402LF KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402LF KCU10 » 12.70 15.50 0.20 - -
    DNGG150404LF K313 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  9. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150401 KC5010 » 12.70 15.50 0.10 4.76 5.16
    DNGP150401 KC5410 » 12.70 15.50 0.10 4.76 5.16
    DNGP150401 KCU10 » 12.70 15.50 0.10 - -
    DNGP150402 KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGP150402 KC5410 » 12.70 15.50 0.20 4.76 5.16
    DNGP150402 KCU10 » 12.70 15.50 0.20 - -
    DNGP150404 K313 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KC5410 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150408 K313 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KC5410 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150604 K313 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KC5410 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP150608 K313 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KC5410 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP150612 K313 » 12.70 15.50 1.20 6.35 5.16
    DNGP

  10. DNMA

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMA110408 KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMA110408 KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMA110412 KCK20 » 9.53 11.63 1.20 4.76 3.81
    DNMA150408 KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMA150408 KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMA150408 KCK15B » 12.70 15.50 0.80 4.76 5.16
    DNMA150408 KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMA150412 KCK05 » 12.70 15.50 1.20 4.76 5.16
    DNMA150412 KCK15 » 12.70 15.50 1.20 4.76 5.16
    DNMA150412 KCK15B » 12.70 15.50 1.20 4.76 5.16
    DNMA150412 KCK20 » 12.70 15.50 1.20 4.76 5.16
    DNMA150416 KCK20 » 12.70 15.50 1.60 4.76 5.16
    DNMA150608 KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMA150608 KCK15 » 12.70 15.50 0.80 6.35 5.16
    DNMA150608 KCK15B » 12.70 15.50 0.80 6.35 5.16
    DNMA150608 KCK20 » 12.70 15.50 0.80 6.35 5.16
    DNMA150612 KCK05 » 12.70 15.50 1.20 6.35 5.16
    DNMA150612 KCK15 » 12.70 15.50 1.20 6.35 5.16
    DNMA150612 KCK15B » 12.70 15.50 1.20 6.35 5.16
    DNMA150612 KCK20 » 12.70 15.50 1.20 6.35 5.16
    DNMA150616 KCK20 » 12.70 15.50 1.60 6.35 5.16
    DNMA

  11. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG-CT

  12. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FF KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FF KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408FF KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCU10 » 9.53 11.63 0.80 - -
    DNMG110408FF KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG150404FF KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FF KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG-FF

  13. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FN KCK05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408FN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG110412FN KCP05 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412FN KCP10 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412FN KT315 » 9.53 11.63 1.20 4.76 3.81
    DNMG-FN

  14. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FW KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FW KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FW KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FW KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FW KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408FW KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG-FW

  15. DNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110404MN KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404MN KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404MN KCP10B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404MN KCP25 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404MN KCP25B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404MN KCP30 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408MN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP30 » 9.53 11.63 0.80 4.76 3.81
    DNMG110412MN KCP10 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412MN KCP10B » 9.53 11.63 1.20 4.76 3.81
    DNMG110412MN KCP25 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412MN KCP25B » 9.53 11.63 1.20 4.76 3.81
    DNMG-MN

  16. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCU10 » 9.53 11.63 0.80 - -
    DNMG110412MP KC5010 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412MP KCM15 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412MP KCM25 » 9.53 11.63 1.20 4.76 3.81
    DNMG-MP

  17. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MS K313 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MS KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MS KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150401MS KC5510 » 12.70 15.50 0.10 4.76 5.16
    DNMG150401MS KCU10 » 12.70 15.50 0.10 - -
    DNMG150402MS KC5525 » 12.70 15.50 0.20 4.76 5.16
    DNMG150402MS KCU10 » 12.70 15.50 0.20 - -
    DNMG150402MS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNMG-MS

  18. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408RP KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110412RP KCK20 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412RP KCM15 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412RP KCP10 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412RP KCP10B » 9.53 11.63 1.20 4.76 3.81
    DNMG110412RP KCP25 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412RP KCP25B » 9.53 11.63 1.20 4.76 3.81
    DNMG-RP

  19. DNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK15B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMG110412UN KCK05 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UN KCK15 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UN KCK15B » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UN KCK20 » 9.53 11.63 1.20 4.76 3.81
    DNMG-UN

  20. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG110412UP KC5010 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UP KCM15 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UP KCM25 » 9.53 11.63 1.20 4.76 3.81
    DNMG-UP

Items 1501 to 1750 of 4611 total

per page
Page:
  2. 5
  3. 6
  4. 7
  5. 8
  6. 9

Set Descending Direction
Newsletter
Shop By

Shopping Options

Manufacturer
  1. Kennametal (4611)
ISO Insert Range
  1. Beyond Premium (4611)
Material Machining
  1. Steel (3005)
  2. Stainless Steel (1512)
  3. Cast Iron (1598)
  4. Aluminium (127)
  5. HRSA (1132)
  6. Universal (920)
Insert Type
  1. Negative (2618)
  2. Positive (1993)
Type of Cut
  1. Fine Finishing (19)
  2. Finishing (2068)
  3. Wiper Finishing (146)
  4. Medium (1046)
  5. Wiper Medium (86)
  6. Medium Roughing (5)
  7. Rough Positive (109)
  8. Rough (858)
  9. Rough Single Sided (274)
Tip Style
  1. CCGT (58)
  2. CCMT (293)
  3. CCMW (5)
  4. CDG (6)
  5. CDHBS (21)
  6. CDHHS (18)
  7. CDT (2)
  8. CNGG (30)
  9. CNGP (19)
  10. CNMA (27)
  11. CNMG (492)
  12. CNMM (130)
  13. CPG (2)
  14. CPGH (22)
  15. CPGT (32)
  16. CPMT (182)
  17. DCGT (26)
  18. DCMT (202)
  19. DNGG (23)
  20. DNGP (23)
  21. DNMA (17)
  22. DNMG (474)
  23. DNMM (26)
  24. DNMS (2)
  25. DPGT (48)
  26. DPMT (82)
  27. RCGH (4)
  28. RCGT (22)
  29. RCGX (2)
  30. RCMT (68)
  31. RNMA (6)
  32. RNMG (28)
  33. RPGT (3)
  34. SCMT (145)
  35. SCMW (4)
  36. SNGG (7)
  37. SNGP (4)
  38. SNMA (23)
  39. SNMG (288)
  40. SNMM (84)
  41. SNMS (5)
  42. SPGT (4)
  43. SPMT (51)
  44. TCGT (28)
  45. TCMT (197)
  46. TCMW (2)
  47. TDHB (18)
  48. TDHH (14)
  49. TNGG (8)
  50. TNGP (5)
  51. TNMA (22)
  52. TNMG (342)
  53. TNMM (34)
  54. TNMP (12)
  55. TNMS (5)
  56. TPCB (11)
  57. TPCG (7)
  58. TPCH (4)
  59. TPGH (10)
  60. TPGT (45)
  61. TPMT (151)
  62. VBGT (39)
  63. VBMT (116)
  64. VNGG (23)
  65. VNGP (9)
  66. VNMG (128)
  67. VNMP (8)
  68. VNMS (9)
  69. WCMT (10)
  70. WNGG (9)
  71. WNMA (18)
  72. WNMG (255)
  73. WPGT (3)
  74. WPGTS (4)
  75. WPMT (30)
  76. WPMTS (4)
Radius°
  1. 0.05 (12)
  2. 0.10 (64)
  3. 0.20 (261)
  4. 0.34 (2)
  5. 0.40 (1131)
  6. 0.74 (6)
  7. 0.80 (1617)
  8. 1.14 (7)
  9. 1.20 (899)
  10. 1.60 (360)
  11. 2.40 (87)
  12. 3.20 (6)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...