GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 274 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

  1. CNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    CNMM120408RM KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RM KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RM KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RM KCP30 » 12.70 12.90 0.80 4.76 5.16
    CNMM120412RM KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RM KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RM KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RM KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RM KCP30 » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RM KCP40 » 12.70 12.90 1.20 4.76 5.16
    CNMM120416RM KCP25 » 12.70 12.90 1.60 4.76 5.16
    CNMM120416RM KCP40 » 12.70 12.90 1.60 4.76 5.16
    CNMM160612RM KCP10 » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RM KCP10B » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RM KCP25 » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RM KCP25B » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RM KCP30 » 15.88 16.12 1.20 6.35 6.35
    CNMM160616RM KCP10 » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RM KCP10B » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RM KCP25 » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RM KCP25B » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RM KCP30 » 15.88 16.12 1.60 6.35 6.35
    CNMM160624RM KCP10 » 15.88 16.12 2.40 6.35 6.35
    CNMM160624RM KCP25 » 15.88 16.12 2.40 6.35 6.35
    CNMM160624RM KCP25B » 15.88 16.12 2.40 6.35 6.35
    CNMM190612RM KCP10 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RM KCP25 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RM KCP25B » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RM KCP30 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RM KCP40 » 19.05 19.34 1.20 6.35 7.93
    CNMM190616RM KCP10 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RM KCP10B » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RM KCP25 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RM KCP25B » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RM KCP30 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RM KCP40 » 19.05 19.34 1.60 6.35 7.93
    CNMM190624RM KCP25 » 19.05 19.34 2.40 6.35 7.93
    CNMM190624RM KCP25B » 19.05 19.34 2.40 6.35 7.93
    CNMM190624RM KCP30 » 19.05 19.34 2.40 6.35 7.93
    CNMM250924RM KCP10 » 25.40 25.79 2.40 9.53 9.12
    CNMM250924RM KCP25 » 25.40 25.79 2.40 9.53 9.12
    CNMM250924RM KCP25B » 25.40 25.79 2.40 9.53 9.12
    CNMM250924RM KCP30 » 25.40 25.79 2.40 9.53 9.12
    CNMM250924RM KCP40 » 25.40 25.79 2.40 9.53 9.12
    CNMM-RM

  2. CNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    CNMM120408RP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP30 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP40 » 12.70 12.90 0.80 4.76 5.16
    CNMM120412RP KCM15 » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RP KCM25 » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RP KCM35 » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RP KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RP KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RP KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RP KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RP KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RP KCP30 » 12.70 12.90 1.20 4.76 5.16
    CNMM120412RP KCP40 » 12.70 12.90 1.20 4.76 5.16
    CNMM120416RP KCM15 » 12.70 12.90 1.60 4.76 5.16
    CNMM120416RP KCP10 » 12.70 12.90 1.60 4.76 5.16
    CNMM120416RP KCP10B » 12.70 12.90 1.60 4.76 5.16
    CNMM120416RP KCP25 » 12.70 12.90 1.60 4.76 5.16
    CNMM120416RP KCP25B » 12.70 12.90 1.60 4.76 5.16
    CNMM120416RP KCP30 » 12.70 12.90 1.60 4.76 5.16
    CNMM120416RP KCP40 » 12.70 12.90 1.60 4.76 5.16
    CNMM160608RP KCP25 » 15.88 16.12 0.80 6.35 6.35
    CNMM160608RP KCP25B » 15.88 16.12 0.80 6.35 6.35
    CNMM160608RP KCP40 » 15.88 16.12 0.80 6.35 6.35
    CNMM160612RP KCM15 » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RP KCM25 » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RP KCM35 » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RP KCP05 » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RP KCP10 » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RP KCP10B » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RP KCP25 » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RP KCP30 » 15.88 16.12 1.20 6.35 6.35
    CNMM160612RP KCP40 » 15.88 16.12 1.20 6.35 6.35
    CNMM160616RP KCM15 » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RP KCM25 » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RP KCP05 » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RP KCP10 » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RP KCP10B » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RP KCP25 » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RP KCP25B » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RP KCP30 » 15.88 16.12 1.60 6.35 6.35
    CNMM160616RP KCP40 » 15.88 16.12 1.60 6.35 6.35
    CNMM190612RP KCM15 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RP KCM25 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RP KCP10 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RP KCP25 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RP KCP25B » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RP KCP30 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RP KCP40 » 19.05 19.34 1.20 6.35 7.93
    CNMM190616RP KCM15 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RP KCM25 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RP KCM35 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RP KCP10 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RP KCP10B » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RP KCP25 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RP KCP30 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RP KCP40 » 19.05 19.34 1.60 6.35 7.93
    CNMM190624RP KCM15 » 19.05 19.34 2.40 6.35 7.93
    CNMM190624RP KCP10 » 19.05 19.34 2.40 6.35 7.93
    CNMM190624RP KCP25 » 19.05 19.34 2.40 6.35 7.93
    CNMM250924RP KCP25 » 25.40 25.79 2.40 9.53 9.13
    CNMM250924RP KCP40 » 25.40 25.79 2.40 9.53 9.13
    CNMM-RP

  3. CNMM-RH

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    CNMM190612RH KCP10 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RH KCP25 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RH KCP30 » 19.05 19.34 1.20 6.35 7.93
    CNMM190612RH KCP40 » 19.05 19.34 1.20 6.35 7.93
    CNMM190616RH KCP10 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RH KCP10B » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RH KCP25 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RH KCP25B » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RH KCP30 » 19.05 19.34 1.60 6.35 7.93
    CNMM190616RH KCP40 » 19.05 19.34 1.60 6.35 7.93
    CNMM190624RH KCP10 » 19.05 19.34 2.40 6.35 7.93
    CNMM190624RH KCP10B » 19.05 19.34 2.40 6.35 7.93
    CNMM190624RH KCP25 » 19.05 19.34 2.40 6.35 7.93
    CNMM190624RH KCP25B » 19.05 19.34 2.40 6.35 7.93
    CNMM190624RH KCP30 » 19.05 19.34 2.40 6.35 7.93
    CNMM250924RH KCP10 » 25.40 25.79 2.40 9.53 9.12
    CNMM250924RH KCP25 » 25.40 25.79 2.40 9.53 9.12
    CNMM250924RH KCP25B » 25.40 25.79 2.40 9.53 9.12
    CNMM250924RH KCP30 » 25.40 25.79 2.40 9.53 9.12
    CNMM250924RH KCP40 » 25.40 25.79 2.40 9.53 9.12
    CNMM-RH

  4. DNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150408RM KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMM150412RM KCP25 » 12.70 15.50 1.20 4.76 5.16
    DNMM150412RM KCP25B » 12.70 15.50 1.20 4.76 5.16
    DNMM150608RM KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RM KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RM KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RM KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMM150612RM KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RM KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RM KCP25B » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RM KCP30 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RM KCP40 » 12.70 15.50 1.20 6.35 5.16
    DNMM150616RM KCP10 » 12.70 15.50 1.60 6.35 5.16
    DNMM150616RM KCP10B » 12.70 15.50 1.60 6.35 5.16
    DNMM150616RM KCP25 » 12.70 15.50 1.60 6.35 5.16
    DNMM-RM

  5. DNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMM150612RP KCM25 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RP KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RP KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RP KCP25B » 12.70 15.50 1.20 6.35 5.16
    DNMM150616RP KCP10 » 12.70 15.50 1.60 6.35 5.16
    DNMM150616RP KCP10B » 12.70 15.50 1.60 6.35 5.16
    DNMM150616RP KCP25 » 12.70 15.50 1.60 6.35 5.16
    DNMM150616RP KCP25B » 12.70 15.50 1.60 6.35 5.16
    DNMM-RP

  6. SNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM120408RM KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RM KCP30 » 12.70 12.70 0.80 4.76 5.16
    SNMM120412RM KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120416RM KCP25 » 12.70 12.70 1.60 4.76 5.16
    SNMM120416RM KCP30 » 12.70 12.70 1.60 4.76 5.16
    SNMM150612RM KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RM KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMM150616RM KCP10 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP25 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP25B » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP30 » 15.88 15.88 1.60 6.35 6.35
    SNMM190612RM KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMM190616RM KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMM190624RM KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RM KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RM KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMM250724RM KCP10 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RM KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RM KCP30 » 25.40 25.40 2.40 7.94 9.12
    SNMM250924RM KCP10 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP25B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP30 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMM-RM

  7. SNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM120408RP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RP KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RP KCP40 » 12.70 12.70 0.80 4.76 5.16
    SNMM120412RP KCM25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120412RP KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120412RP KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMM150612RP KCM25 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RP KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RP KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMM150616RP KCM25 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RP KCP10 » 15.88 15.88 1.60 6.35 6.35
    SNMM190612RP KCM25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RP KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RP KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMM190616RP KCM25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMM190624RP KCM25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RP KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RP KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM250724RP KCM25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RP KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RP KCP40 » 25.40 25.40 2.40 7.94 9.12
    SNMM250924RP KCM25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RP KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM-RP

  8. SNMM-RH

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM190612RH KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMM190616RH KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMM190624RH KCP10 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP40 » 19.05 19.05 2.40 6.35 7.93
    SNMM250724RH KCP10 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP10B » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP25B » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP30 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP40 » 25.40 25.40 2.40 7.94 9.12
    SNMM250732RH KCP30 » 25.40 25.40 3.20 7.94 9.12
    SNMM250924RH KCP10 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP10B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP25B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP30 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMM-RH

  9. TNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    TNMM160408RM KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMM160408RM KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMM160408RM KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMM160408RM KCP30 » 9.53 16.50 0.80 4.76 3.81
    TNMM160412RM KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMM220408RM KCP25 » 12.70 22.00 0.80 4.76 5.16
    TNMM220408RM KCP25B » 12.70 22.00 0.80 4.76 5.16
    TNMM-RM

  10. TNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    TNMM160408RP KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMM160408RP KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMM160412RP KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMM-RP

Items 1 to 250 of 274 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Type of Cut: Rough Single Sided Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (274)
ISO Insert Range
  1. Beyond Premium (274)
Material Machining
  1. Steel (242)
  2. Stainless Steel (32)
Insert Type
  1. Negative (274)
Type of Cut
  1. Fine Finishing (19)
  2. Finishing (2068)
  3. Wiper Finishing (146)
  4. Medium (1046)
  5. Wiper Medium (86)
  6. Medium Roughing (5)
  7. Rough Positive (109)
  8. Rough (858)
Tip Style
  1. CNMM (130)
  2. DNMM (26)
  3. SNMM (84)
  4. TNMM (34)
Radius°
  1. 0.80 (40)
  2. 1.20 (90)
  3. 1.60 (81)
  4. 2.40 (62)
  5. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...