GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 261 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
  1. CCGT

    Positive ISO insert for Finishing machining.

    Product Code D L10  
    CCGT06020211 KT325 » 6.35 6.45 0.20
    CCGT09T30211 KT325 » 9.53 9.67 0.20
    CCGT
  2. CCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CCGT060202HP K313 » 6.35 6.45 0.20 2.38 2.80
    CCGT060202HP KC5410 » 6.35 6.45 0.20 2.38 2.80
    CCGT060202HP KCU25 » 6.35 6.45 0.20 2.38 2.80
    CCGT09T302HP K313 » 9.53 9.67 0.20 3.97 4.40
    CCGT09T302HP KC5410 » 9.53 9.67 0.20 3.97 4.40
    CCGT09T302HP KCU10 » 9.53 9.67 0.20 - -
    CCGT09T302HP KCU25 » 9.53 9.67 0.20 3.97 4.40
    CCGT120402HP KC5410 » 12.70 12.90 0.20 4.76 5.50
    CCGT120402HP KCU10 » 12.70 12.90 0.20 - -
    CCGT120402HP KCU25 » 12.70 12.90 0.20 4.76 5.50
    CCGT-HP
  3. CCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CCGT060202LF KC5025 » 6.35 6.45 0.20 2.38 2.80
    CCGT060202LF KC5410 » 6.35 6.45 0.20 2.38 2.80
    CCGT060202LF KCU10 » 6.35 6.45 0.20 - -
    CCGT09T302LF KC5025 » 9.53 9.67 0.20 3.97 4.40
    CCGT09T302LF KC5410 » 9.53 9.67 0.20 3.97 4.40
    CCGT09T302LF KCU10 » 9.53 9.67 0.20 - -
    CCGT-LF
  4. CCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CCMT060202FP KCM25 » 6.35 6.45 0.20 2.38 2.80
    CCMT060202FP KCP10 » 6.35 6.45 0.20 2.38 2.80
    CCMT060202FP KCP25 » 6.35 6.45 0.20 2.38 2.80
    CCMT060202FP KCU10 » 6.35 6.45 0.20 2.38 2.80
    CCMT060202FP KCU25 » 6.35 6.45 0.20 2.38 2.80
    CCMT060202FP KTP10 » 6.35 6.45 0.20 2.38 2.80
    CCMT060202FP KU10 » 6.35 6.45 0.20 2.38 2.80
    CCMT09T302FP KCM25 » 9.53 9.67 0.20 3.97 4.40
    CCMT09T302FP KCP25 » 9.53 9.67 0.20 3.97 4.40
    CCMT09T302FP KCP25B » 9.53 9.67 0.20 3.97 4.40
    CCMT09T302FP KCU10 » 9.53 9.67 0.20 3.97 4.40
    CCMT09T302FP KCU25 » 9.53 9.67 0.20 3.97 4.40
    CCMT09T302FP KTP10 » 9.53 9.67 0.20 3.97 4.40
    CCMT09T302FP KU10 » 9.53 9.67 0.20 3.97 4.40
    CCMT-FP
  5. CCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 S D1  
    CCMT060202FW KT315 » 6.35 6.45 0.20 2.38 2.80
    CCMT-FW
  6. CCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CCMT060202LF KT315 » 6.35 6.45 0.20 2.38 2.80
    CCMT09T302LF KT315 » 9.53 9.67 0.20 3.97 4.40
    CCMT-LF
  7. CCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CCMT09T302UF KCP05 » 9.53 9.67 0.20 3.97 4.40
    CCMT09T302UF KCP10 » 9.53 9.67 0.20 3.97 4.40
    CCMT-UF
  8. CDHBS

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CDHBS4T002 K313 » 3.97 4.03 0.18 1.02 2.13
    CDHBS4T002 KC5010 » 3.97 4.03 0.18 1.02 2.13
    CDHBS4T002 KC5025 » 3.97 4.03 0.18 1.02 2.13
    CDHBS4T002 KCU10 » 3.97 4.03 0.18 - -
    CDHBS4T002 KCU25 » 3.97 4.03 0.18 1.02 2.13
    CDHBS4T002 KT315 » 3.97 4.03 0.18 1.02 2.13
    CDHBS
  9. CDHBS-FST

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CDHBS4T002FST KD1400 » 3.97 4.03 0.18 1.02 2.13
    CDHBS4T004FST KD1425 » 3.97 4.03 0.18 1.02 2.13
    CDHBS-FST
  10. CDHHS-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CDHHS4T002L KC5010 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T002L KC5025 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T002L KCU10 » 3.97 4.03 0.18 - -
    CDHHS4T002L KCU25 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T002L KT315 » 3.97 4.03 0.18 1.02 2.13
    CDHHS-L
  11. CDHHS-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CDHHS4T002R KC5010 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T002R KC5025 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T002R KCU10 » 3.97 4.03 0.18 - -
    CDHHS4T002R KCU25 » 3.97 4.03 0.18 1.02 2.13
    CDHHS4T002R KT315 » 3.97 4.03 0.18 1.02 2.13
    CDHHS-R
  12. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CNGG120402FS KC5525 » 12.70 12.90 0.20 4.76 5.16
    CNGG120402FS KCU25 » 12.70 12.90 0.20 4.76 5.16
    CNGG-FS
  13. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CNGG120402LF K313 » 12.70 12.90 0.20 4.76 5.16
    CNGG120402LF KC5010 » 12.70 12.90 0.20 4.76 5.16
    CNGG120402LF KC730 » 12.70 12.90 0.20 4.76 5.16
    CNGG120402LF KCU10 » 12.70 12.90 0.20 - -
    CNGG-LF
  14. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CNGP120402 K10U » 12.70 12.90 0.20 - -
    CNGP120402 KC5410 » 12.70 12.90 0.20 4.76 5.16
    CNGP120402 KCU10 » 12.70 12.90 0.20 - -
    CNGP
  15. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CNMG120402FN KC5010 » 12.70 12.90 0.20 4.76 5.16
    CNMG120402FN KCU10 » 12.70 12.90 0.20 - -
    CNMG120402FN KT315 » 12.70 12.90 0.20 4.76 5.16
    CNMG-FN
  16. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 S D1  
    CNMG120402MS K313 » 12.70 12.90 0.20 4.76 5.16
    CNMG120402MS KCU25 » 12.70 12.90 0.20 4.76 5.16
    CNMG-MS
  17. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CPGH09T302 KC5010 » 9.53 9.67 0.20 3.97 4.40
    CPGH09T302 KC5025 » 9.53 9.67 0.20 3.97 4.40
    CPGH09T302 KCU10 » 9.53 9.67 0.20 - -
    CPGH09T302 KCU25 » 9.53 9.67 0.20 3.97 4.40
    CPGH09T302 KT315 » 9.53 9.67 0.20 3.97 4.40
    CPGH
  18. CPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CPGT060202HP KC5410 » 6.35 6.45 0.20 2.38 2.80
    CPGT060202HP KCU10 » 6.35 6.45 0.20 - -
    CPGT060202HP KCU25 » 6.35 6.45 0.20 2.38 2.80
    CPGT09T302HP KC5410 » 9.53 9.67 0.20 3.97 4.40
    CPGT09T302HP KCU10 » 9.53 9.67 0.20 - -
    CPGT09T302HP KCU25 » 9.53 9.67 0.20 3.97 4.40
    CPGT-HP
  19. CPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CPGT060202LF KC5410 » 6.35 6.45 0.20 2.38 2.80
    CPGT060202LF KCU10 » 6.35 6.45 0.20 - -
    CPGT09T302LF KC5410 » 9.53 9.67 0.20 3.97 4.40
    CPGT09T302LF KCU10 » 9.53 9.67 0.20 - -
    CPGT-LF
  20. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CPMT050202FP KCU10 » 5.56 5.65 0.20 2.38 2.50
    CPMT050202FP KCU25 » 5.56 5.65 0.20 2.38 2.50
    CPMT060202FP KCM25 » 6.35 6.45 0.20 2.38 2.80
    CPMT060202FP KCP10 » 6.35 6.45 0.20 2.38 2.80
    CPMT060202FP KCP25 » 6.35 6.45 0.20 2.38 2.80
    CPMT060202FP KCU10 » 6.35 6.45 0.20 2.38 2.80
    CPMT060202FP KCU25 » 6.35 6.45 0.20 2.38 2.80
    CPMT060202FP KTP10 » 6.35 6.45 0.20 2.38 2.80
    CPMT09T302FP KCM25 » 9.53 9.67 0.20 3.97 4.40
    CPMT09T302FP KCU10 » 9.53 9.67 0.20 3.97 4.40
    CPMT09T302FP KCU25 » 9.53 9.67 0.20 3.97 4.40
    CPMT09T302FP KTP10 » 9.53 9.67 0.20 3.97 4.40
    CPMT-FP
  21. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 S D1  
    CPMT060202FW KCU10 » 6.35 6.45 0.20 - -
    CPMT060202FW KT315 » 6.35 6.45 0.20 2.38 2.80
    CPMT-FW
  22. CPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CPMT060202LF K313 » 6.35 6.45 0.20 2.38 2.80
    CPMT09T302LF K313 » 9.53 9.67 0.20 3.97 4.40
    CPMT09T302LF KT315 » 9.53 9.67 0.20 3.97 4.40
    CPMT-LF
  23. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DCGT070202HP K313 » 6.35 7.75 0.20 2.38 2.80
    DCGT070202HP KC5410 » 6.35 7.75 0.20 2.38 2.80
    DCGT070202HP KCU10 » 6.35 7.75 0.20 - -
    DCGT070202HP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DCGT11T302HP K313 » 9.53 11.63 0.20 3.97 4.40
    DCGT11T302HP KC5410 » 9.53 11.63 0.20 3.97 4.40
    DCGT11T302HP KCU10 » 9.53 11.63 0.20 - -
    DCGT11T302HP KCU25 » 9.53 11.63 0.20 3.97 4.40
    DCGT-HP
  24. DCMT

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DCMT07020211 KT315 » 6.35 7.75 0.20 2.38 2.80
    DCMT
  25. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DCMT070202FP KCM25 » 6.35 7.75 0.20 2.38 2.80
    DCMT070202FP KCP25 » 6.35 7.75 0.20 2.38 2.80
    DCMT070202FP KCP25B » 6.35 7.75 0.20 2.38 2.80
    DCMT070202FP KCU10 » 6.35 7.75 0.20 2.38 2.80
    DCMT070202FP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DCMT070202FP KTP10 » 6.35 7.75 0.20 2.38 2.80
    DCMT11T302FP KCM25 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCP10 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCP10B » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCP25 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCP25B » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCU10 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCU25 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KTP10 » 9.53 11.63 0.20 3.97 4.40
    DCMT-FP
  26. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DCMT070202LF K313 » 6.35 7.75 0.20 2.38 2.80
    DCMT11T302LF K313 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302LF KT315 » 9.53 11.63 0.20 3.97 4.40
    DCMT-LF
  27. DCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DCMT11T302UF KCP05 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302UF KCP10 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302UF KCP10B » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302UF KCP25 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302UF KCP25B » 9.53 11.63 0.20 3.97 4.40
    DCMT-UF
  28. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DNGG110402FS KC5525 » 9.52 11.63 0.20 4.76 3.81
    DNGG110402FS KCU25 » 9.52 11.63 0.20 4.76 3.81
    DNGG150402FS KC5510 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402FS KC5525 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402FS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNGG-FS
  29. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DNGG150402LF KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402LF KCU10 » 12.70 15.50 0.20 - -
    DNGG-LF
  30. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DNGP150402 KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGP150402 KC5410 » 12.70 15.50 0.20 4.76 5.16
    DNGP150402 KCU10 » 12.70 15.50 0.20 - -
    DNGP
  31. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 S D1  
    DNMG150402MS KC5525 » 12.70 15.50 0.20 4.76 5.16
    DNMG150402MS KCU10 » 12.70 15.50 0.20 - -
    DNMG150402MS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNMG-MS
  32. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DPGT070202HP K313 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202HP KC5410 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202HP KCU10 » 6.35 7.75 0.20 - -
    DPGT070202HP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DPGT-HP
  33. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DPGT070202LF KC5010 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202LF KC5025 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202LF KC5410 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202LF KCU10 » 6.35 7.75 0.20 - -
    DPGT11T302LF KC5010 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T302LF KC5025 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T302LF KC5410 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T302LF KCU10 » 9.53 11.63 0.20 - -
    DPGT-LF
  34. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DPMT070202FP KCU10 » 6.35 7.75 0.20 2.38 2.80
    DPMT070202FP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DPMT11T302FP KCU10 » 9.53 11.63 0.20 3.97 4.40
    DPMT11T302FP KCU25 » 9.53 11.63 0.20 3.97 4.40
    DPMT-FP
  35. DPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DPMT11T302LF KT315 » 9.53 11.63 0.20 3.97 4.40
    DPMT-LF
  36. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TCGT110202HP KC5410 » 6.35 11.00 0.20 2.38 2.80
    TCGT110202HP KCU10 » 6.35 11.00 0.20 2.38 2.80
    TCGT110202HP KCU25 » 6.35 11.00 0.20 2.38 2.80
    TCGT16T302HP KCU10 » 9.53 16.50 0.20 3.97 4.40
    TCGT16T302HP KCU25 » 9.53 16.50 0.20 3.97 4.40
    TCGT-HP
  37. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TCGT16T302LF KCU10 » 9.53 16.50 0.20 3.97 4.40
    TCGT-LF
  38. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TCMT110202FP KCM25 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202FP KCU10 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202FP KCU25 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202FP KTP10 » 6.35 11.00 0.20 2.38 2.90
    TCMT16T302FP KCU10 » 9.53 16.50 0.20 3.97 4.40
    TCMT16T302FP KCU25 » 9.53 16.50 0.20 3.97 4.40
    TCMT16T302FP KTP10 » 9.53 16.50 0.20 3.97 4.40
    TCMT-FP
  39. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TCMT110202LF KC5010 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202LF KC5025 » 6.35 11.00 0.20 2.38 2.90
    TCMT16T302LF KC5010 » 9.53 16.50 0.20 3.97 4.40
    TCMT16T302LF KC5025 » 9.53 16.50 0.20 3.97 4.40
    TCMT-LF
  40. TDHB

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TDHB07T1202 KC5010 » 4.06 7.04 0.18 1.19 2.39
    TDHB07T1202 KC5025 » 4.06 7.04 0.18 1.19 2.39
    TDHB07T1202 KCU10 » 4.06 7.04 0.18 - -
    TDHB07T1202 KCU25 » 4.06 7.04 0.18 1.19 2.39
    TDHB07T1202 KT315 » 4.06 7.04 0.18 1.19 2.39
    TDHB
  41. TDHH-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TDHH07T1202L KC5010 » 4.06 7.04 0.18 1.19 2.39
    TDHH07T1202L KC5025 » 4.06 7.04 0.18 1.19 2.39
    TDHH07T1202L KCU10 » 4.06 7.04 0.18 - -
    TDHH07T1202L KCU25 » 4.06 7.04 0.18 1.19 2.39
    TDHH-L
  42. TDHH-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TDHH07T1202R KC5010 » 4.06 7.04 0.18 1.19 2.39
    TDHH07T1202R KCU10 » 4.06 7.04 0.18 - -
    TDHH-R
  43. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TNGG160402FS KCU25 » 9.53 16.50 0.20 4.76 3.81
    TNGG-FS
  44. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TNGP160402 KC5410 » 9.53 16.50 0.20 4.76 3.81
    TNGP
  45. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 S D1  
    TNMG160402MS KCU10 » 9.53 16.50 0.20 - -
    TNMG160402MS KCU25 » 9.53 16.50 0.20 4.76 3.81
    TNMG-MS
  46. TPCB

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TPCB160302 KC5010 » 9.53 16.50 0.18 3.23 3.30
    TPCB
  47. TPCG-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TPCG110202L KC5010 » 6.35 11.00 0.18 2.44 3.30
    TPCG-L
  48. TPCH

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TPCH110202 KC5010 » 6.50 11.26 0.18 2.44 3.30
    TPCH110202 KC5025 » 6.50 11.26 0.18 2.44 3.30
    TPCH110202 KCU25 » 6.50 11.26 0.18 2.44 3.30
    TPCH
  49. TPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TPGT090202LF KC5010 » 5.56 9.63 0.20 2.38 2.65
    TPGT090202LF KC5025 » 5.56 9.63 0.20 2.38 2.65
    TPGT090202LF KC5410 » 5.56 9.63 0.20 2.38 2.65
    TPGT090202LF KCU10 » 5.56 9.63 0.20 - -
    TPGT110202LF KC5025 » 6.35 11.00 0.20 2.38 2.80
    TPGT110202LF KC5410 » 6.35 11.00 0.20 2.38 2.80
    TPGT110202LF KCU10 » 6.35 11.00 0.20 - -
    TPGT-LF
  50. TPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TPGT110202HP K313 » 6.35 11.00 0.20 2.38 2.90
    TPGT110202HP KC5410 » 6.35 11.00 0.20 2.38 2.90
    TPGT110202HP KCU10 » 6.35 11.00 0.20 - -
    TPGT110202HP KCU25 » 6.35 11.00 0.20 2.38 2.90
    TPGT16T302HP KC5410 » 9.53 16.50 0.20 3.97 4.40
    TPGT16T302HP KCU10 » 9.53 16.50 0.20 - -
    TPGT16T302HP KCU25 » 9.53 16.50 0.20 3.97 4.40
    TPGT-HP
  51. TPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TPMT090202LF KC5025 » 5.56 9.63 0.20 2.38 2.65
    TPMT090202LF KT315 » 5.56 9.63 0.20 2.38 2.65
    TPMT110202LF KC5025 » 6.35 11.00 0.20 2.38 2.80
    TPMT110202LF KT315 » 6.35 11.00 0.20 2.38 2.80
    TPMT-LF
  52. TPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TPMT110202FP KCU10 » 6.35 11.00 0.20 2.38 2.80
    TPMT110202FP KCU25 » 6.35 11.00 0.20 2.38 2.80
    TPMT-FP
  53. TPMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    TPMT110202UF KC5010 » 6.35 11.00 0.20 2.38 2.80
    TPMT110202UF KCP05 » 6.35 11.00 0.20 2.38 2.80
    TPMT-UF
  54. VBGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    VBGT110302HP KC5025 » 6.35 11.07 0.20 3.18 2.80
    VBGT110302HP KC5410 » 6.35 11.07 0.20 3.18 2.80
    VBGT110302HP KCU10 » 6.35 11.07 0.20 - -
    VBGT110302HP KCU25 » 6.35 11.07 0.20 3.18 2.80
    VBGT-HP
  55. VBGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    VBGT110302LF KC5025 » 6.35 11.07 0.20 3.18 2.80
    VBGT110302LF KC5410 » 6.35 11.07 0.20 3.18 2.80
    VBGT110302LF KCU10 » 6.35 11.07 0.20 - -
    VBGT160402LF K313 » 9.53 16.61 0.20 4.76 4.40
    VBGT160402LF KC5025 » 9.53 16.61 0.20 4.76 4.40
    VBGT160402LF KC5410 » 9.53 16.61 0.20 4.76 4.40
    VBGT160402LF KCU10 » 9.53 16.61 0.20 - -
    VBGT-LF
  56. VBMT

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    VBMT11030211 KT315 » 6.35 11.07 0.20 3.18 2.80
    VBMT
  57. VBMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    VBMT110302FP KCP25 » 6.35 11.07 0.20 3.18 2.80
    VBMT110302FP KCU10 » 6.35 11.07 0.20 3.18 2.80
    VBMT160402FP KCM25 » 9.53 16.61 0.20 4.76 4.40
    VBMT160402FP KCP25 » 9.53 16.61 0.20 4.76 4.40
    VBMT160402FP KCU10 » 9.53 16.61 0.20 4.76 4.40
    VBMT160402FP KCU25 » 9.53 16.61 0.20 4.76 4.40
    VBMT160402FP KTP10 » 9.53 16.61 0.20 4.76 4.40
    VBMT-FP
  58. VBMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    VBMT110302LF K313 » 6.35 11.07 0.20 3.18 2.80
    VBMT160402LF K313 » 9.53 16.61 0.20 4.76 4.40
    VBMT160402LF KC5025 » 9.53 16.61 0.20 4.76 4.40
    VBMT160402LF KT315 » 9.53 16.61 0.20 4.76 4.40
    VBMT-LF
  59. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    VNGG160402FS KC5525 » 9.53 16.61 0.20 4.76 3.81
    VNGG160402FS KCU25 » 9.53 16.61 0.20 4.76 3.81
    VNGG-FS
  60. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    VNGG160402LF K313 » 9.53 16.61 0.20 4.76 3.81
    VNGG160402LF KC5010 » 9.53 16.61 0.20 4.76 3.81
    VNGG160402LF KC730 » 9.53 16.61 0.20 4.76 3.81
    VNGG160402LF KCU10 » 9.53 16.61 0.20 - -
    VNGG-LF

Items 1 to 250 of 261 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

Please wait...