GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

162 Item(s)

per page

Set Descending Direction

  1. CNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090312MN KCP25 » 9.53 9.67 1.20 3.18 3.81
    CNMG120412MN KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP30 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MN KCP40 » 12.70 12.90 1.20 4.76 5.16
    CNMG160612MN KCP05 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MN KCP10 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MN KCP10B » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MN KCP25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MN KCP25B » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MN KCP30 » 15.88 16.12 1.20 6.35 6.35
    CNMG190612MN KCP10 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MN KCP10B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MN KCP25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MN KCP25B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MN KCP30 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MN KCP40 » 19.05 19.34 1.20 6.35 7.93
    CNMG-MN

  2. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120412CT KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG-CT

  3. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120412FN KCK05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KT315 » 12.70 12.90 1.20 4.76 5.16
    CNMG-FN

  4. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120412FP KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FP KCM15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FP KCU10 » 12.70 12.90 1.20 - -
    CNMG-FP

  5. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120412FW KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FW KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FW KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FW KCU10 » 12.70 12.90 1.20 - -
    CNMG120412FW KT315 » 12.70 12.90 1.20 4.76 5.16
    CNMG-FW

  6. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120412MP KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KC5025 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCM15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCM25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCM35 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCU10 » 12.70 12.90 1.20 - -
    CNMG120412MP KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG160612MP KC5010 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MP KCM15 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MP KCM25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MP KCM35 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MP KCU10 » 15.88 16.12 1.20 - -
    CNMG160612MP KCU25 » 15.88 16.12 1.20 6.35 6.35
    CNMG190612MP KC5010 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MP KCM15 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MP KCM25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MP KCM35 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MP KCU10 » 19.05 19.34 1.20 - -
    CNMG190612MP KCU25 » 19.05 19.34 1.20 6.35 7.93
    CNMG-MP

  7. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120412MS K313 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MS KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG160612MS K313 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MS KCU10 » 15.88 16.12 1.20 - -
    CNMG160612MS KCU25 » 15.88 16.12 1.20 6.35 6.35
    CNMG190612MS K313 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MS KCU25 » 19.05 19.34 1.20 - -
    CNMG-MS

  8. CNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120412MW KC9225 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MW KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MW KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MW KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MW KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MW KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG-MW

  9. CNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120412RN KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP30 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RN KCP40 » 12.70 12.90 1.20 4.76 5.16
    CNMG160612RN KCP10 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RN KCP10B » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RN KCP25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RN KCP25B » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RN KCP30 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RN KCP40 » 15.88 16.12 1.20 6.35 6.35
    CNMG190612RN KCP10 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RN KCP10B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RN KCP25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RN KCP25B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RN KCP30 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RN KCP40 » 19.05 19.34 1.20 6.35 7.93
    CNMG-RN

  10. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120412RP KCK05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCK15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCK15B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCK20 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCM15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCM25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCM35 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP30 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCP40 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCU10 » 12.70 12.90 1.20 - -
    CNMG120412RP KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG160612RP KC5510 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCK05 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCK15 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCK20 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCM15 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCM25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCM35 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCP10 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCP10B » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCP25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCP25B » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCP30 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCP40 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCU10 » 15.88 16.12 1.20 - -
    CNMG160612RP KCU25 » 15.88 16.12 1.20 6.35 6.35
    CNMG190612RP KCK05 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCK15 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCK15B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCK20 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCM15 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCM25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCM35 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCP10 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCP10B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCP25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCP25B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCP30 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCP40 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCU10 » 19.05 19.34 1.20 - -
    CNMG190612RP KCU25 » 19.05 19.34 1.20 6.35 7.93
    CNMG-RP

  11. CNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120412UN KCK05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK15B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK20 » 12.70 12.90 1.20 4.76 5.16
    CNMG160612UN KCK05 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UN KCK15 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UN KCK15B » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UN KCK20 » 15.88 16.12 1.20 6.35 6.35
    CNMG190612UN KCK05 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UN KCK15 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UN KCK15B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UN KCK20 » 19.05 19.34 1.20 6.35 7.93
    CNMG-UN

  12. CNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120412UP KCM15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UP KCM25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UP KCM35 » 12.70 12.90 1.20 4.76 5.16
    CNMG160612UP KCM15 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UP KCM25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UP KCM35 » 15.88 16.12 1.20 6.35 6.35
    CNMG190612UP KCM15 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UP KCM25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UP KCM35 » 19.05 19.34 1.20 6.35 7.93
    CNMG-UP

  13. CNMG

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG190612 KCP25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612 KCP40 » 19.05 19.34 1.20 6.35 7.93
    CNMG

162 Item(s)

per page

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Tip Style: CNMG Remove This Item
  2. Radius°: 1.20 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (162)
ISO Insert Range
  1. Beyond Premium (162)
Material Machining
  1. Steel (105)
  2. Stainless Steel (52)
  3. Cast Iron (47)
  4. HRSA (27)
  5. Universal (23)
Insert Type
  1. Negative (162)
Type of Cut
  1. Finishing (15)
  2. Wiper Finishing (5)
  3. Medium (49)
  4. Wiper Medium (6)
  5. Rough Positive (46)
  6. Rough (41)
Tip Style
  1. CCMT (28)
  2. CCMW (1)
  3. CNGG (6)
  4. CNGP (3)
  5. CNMA (9)
  6. CNMM (46)
  7. CPMT (6)
  8. DCMT (18)
  9. DNGP (1)
  10. DNMA (7)
  11. DNMG (137)
  12. DNMM (11)
  13. SCMT (23)
  14. SCMW (1)
  15. SNGG (2)
  16. SNMA (10)
  17. SNMG (127)
  18. SNMM (21)
  19. SNMS (3)
  20. TCMT (25)
  21. TNMA (7)
  22. TNMG (105)
  23. TNMM (12)
  24. TNMP (1)
  25. TPMT (9)
  26. VBMT (4)
  27. VNMG (28)
  28. WNMA (7)
  29. WNMG (69)
Radius°
  1. 0.10 (2)
  2. 0.20 (5)
  3. 0.40 (63)
  4. 0.80 (156)
  5. 1.60 (100)
  6. 2.40 (4)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...