GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 501 to 750 of 1617 total

per page
Page:
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5

Set Descending Direction

  1. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150408FP KCM25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP05 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCU10 » 12.70 15.50 0.80 4.76 5.50
    DCMT-FP

  2. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150408LF KCK05 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCK20 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP25B » 12.70 15.50 0.80 4.76 5.50
    DCMT-LF

  3. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408FS KC5525 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG150608FS KC5510 » 12.70 15.50 0.80 6.35 5.16
    DNGG-FS

  4. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  5. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150408 K313 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KC5410 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 K313 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KC5410 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP

  6. DNMA

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMA110408 KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMA110408 KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMA150408 KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMA150408 KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMA150408 KCK15B » 12.70 15.50 0.80 4.76 5.16
    DNMA150408 KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMA150608 KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMA150608 KCK15 » 12.70 15.50 0.80 6.35 5.16
    DNMA150608 KCK15B » 12.70 15.50 0.80 6.35 5.16
    DNMA150608 KCK20 » 12.70 15.50 0.80 6.35 5.16
    DNMA

  7. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG-CT

  8. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FF KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCU10 » 9.53 11.63 0.80 - -
    DNMG110408FF KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408FF KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150408FF KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608FF KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150608FF KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FF

  9. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408FN KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608FN KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FN

  10. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FW KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG-FW

  11. DNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP30 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408MN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP40 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MN

  12. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCU10 » 9.53 11.63 0.80 - -
    DNMG150408MP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MP

  13. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MS K313 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MS KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MS KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408MS K313 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150408MS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MS K313 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MS

  14. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408RP KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408RP KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP40 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608RP KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCK15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCK15B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCK20 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG-RP

  15. DNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK15B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408UN KCK05 » 12.70 15.50 0.80 - -
    DNMG150408UN KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UN KCK15B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UN KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608UN KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UN KCK15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UN KCK15B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UN KCK20 » 12.70 15.50 0.80 6.35 5.16
    DNMG-UN

  16. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG-UP

  17. DNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150408RN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608RN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG190608RN KCP10 » 15.88 19.38 0.80 6.35 6.35
    DNMG190608RN KCP10B » 15.88 19.38 0.80 6.35 6.35
    DNMG190608RN KCP25 » 15.88 19.38 0.80 6.35 6.35
    DNMG190608RN KCP30 » 15.88 19.38 0.80 6.35 6.35
    DNMG-RN

  18. DNMG-RM

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG190608RM KCP25 » 15.88 19.38 0.80 6.35 6.35
    DNMG-RM

  19. DNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150408RM KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMM150608RM KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RM KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RM KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RM KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMM-RM

  20. DNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMM-RP

  21. DNMS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMS150408 K68 » 12.70 15.50 0.80 4.76 5.16
    DNMS150408 KC5410 » 12.70 15.50 0.80 4.76 5.16
    DNMS

  22. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070208HP KC5410 » 6.35 7.75 0.80 2.38 2.80
    DPGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DPGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPGT11T308HP K313 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308HP KC5410 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPGT-HP

  23. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308LF KC5010 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5025 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5410 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DPGT-LF

  24. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPMT11T308FP KCK20 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCP25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KTP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT-FP

  25. DPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070208FW KC5010 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FW KCK20 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FW KCP25 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FW KCU10 » 6.35 7.75 0.80 - -
    DPMT11T308FW KCK20 » 9.53 11.63 0.80 3.97 4.40
    DPMT-FW

  26. DPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T308LF KCK05 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCK20 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP05 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT-LF

Items 501 to 750 of 1617 total

per page
Page:
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Radius°: 0.80 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (1617)
ISO Insert Range
  1. Beyond Premium (1617)
Material Machining
  1. Steel (1022)
  2. Stainless Steel (521)
  3. Cast Iron (560)
  4. Aluminium (40)
  5. HRSA (336)
  6. Universal (287)
Insert Type
  1. Negative (850)
  2. Positive (767)
Type of Cut
  1. Fine Finishing (9)
  2. Finishing (759)
  3. Wiper Finishing (52)
  4. Medium (417)
  5. Wiper Medium (34)
  6. Medium Roughing (2)
  7. Rough Positive (24)
  8. Rough (280)
  9. Rough Single Sided (40)
Tip Style
  1. CCGT (13)
  2. CCMT (123)
  3. CCMW (2)
  4. CNGG (7)
  5. CNGP (4)
  6. CNMA (7)
  7. CNMG (156)
  8. CNMM (15)
  9. CPGH (7)
  10. CPGT (10)
  11. CPMT (85)
  12. DCGT (8)
  13. DCMT (72)
  14. DNGG (5)
  15. DNGP (8)
  16. DNMA (8)
  17. DNMG (176)
  18. DNMM (8)
  19. DNMS (2)
  20. DPGT (11)
  21. DPMT (35)
  22. SCMT (81)
  23. SCMW (2)
  24. SNGG (5)
  25. SNGP (2)
  26. SNMA (4)
  27. SNMG (71)
  28. SNMM (5)
  29. SNMS (2)
  30. SPGT (2)
  31. SPMT (39)
  32. TCGT (8)
  33. TCMT (97)
  34. TCMW (1)
  35. TDHB (3)
  36. TNGG (5)
  37. TNGP (2)
  38. TNMA (8)
  39. TNMG (123)
  40. TNMM (12)
  41. TNMP (5)
  42. TNMS (3)
  43. TPCB (3)
  44. TPCG (1)
  45. TPGH (4)
  46. TPGT (12)
  47. TPMT (77)
  48. VBGT (5)
  49. VBMT (48)
  50. VNGG (8)
  51. VNGP (2)
  52. VNMG (54)
  53. VNMP (4)
  54. VNMS (5)
  55. WCMT (5)
  56. WNGG (2)
  57. WNMA (8)
  58. WNMG (117)
  59. WPMT (13)
Radius°
  1. 0.05 (12)
  2. 0.10 (64)
  3. 0.20 (261)
  4. 0.34 (2)
  5. 0.40 (1131)
  6. 0.74 (6)
  7. 1.14 (7)
  8. 1.20 (899)
  9. 1.60 (360)
  10. 2.40 (87)
  11. 3.20 (6)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...