GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 251 to 500 of 920 total

per page
Page:
  2. 1
  3. 2
  4. 3
  5. 4

Set Descending Direction

  1. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T308FP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPMT-FP

  2. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    CPMT09T304FW KCU10 » 9.53 9.67 0.40
    CPMT09T308FW KCU10 » 9.53 9.67 0.80
    CPMT-FW

  3. CPMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CPMT09T304MW KCU10 » 9.53 9.67 0.40
    CPMT09T308MW KCU10 » 9.53 9.67 0.80
    CPMT-MW

  4. CPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CPMT09T308MP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT-MP

  5. DCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DCGT070201LF KCU10 » 6.35 7.75 0.10
    DCGT11T301LF KCU10 » 9.53 11.63 0.10
    DCGT150408LF KCU10 » 12.70 15.50 0.80
    DCGT-LF

  6. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT070202HP KCU10 » 6.35 7.75 0.20 - -
    DCGT070202HP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DCGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DCGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DCGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DCGT11T302HP KCU10 » 9.53 11.63 0.20 - -
    DCGT11T302HP KCU25 » 9.53 11.63 0.20 3.97 4.40
    DCGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DCGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DCGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCGT-HP

  7. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT070202FP KCU10 » 6.35 7.75 0.20 2.38 2.80
    DCMT070202FP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DCMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DCMT11T302FP KCU10 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCU25 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T312FP KCU10 » 9.53 11.63 1.20 3.97 4.40
    DCMT150404FP KCU10 » 12.70 15.50 0.40 4.76 5.50
    DCMT150408FP KCU10 » 12.70 15.50 0.80 4.76 5.50
    DCMT-FP

  8. DCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    DCMT11T304FW KCU10 » 9.53 11.63 0.40
    DCMT11T308FW KCU10 » 9.53 11.63 0.80
    DCMT-FW

  9. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    DCMT11T304MW KCU10 » 9.53 11.63 0.40
    DCMT11T308MW KCU10 » 9.53 11.63 0.80
    DCMT-MW

  10. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DCMT11T308LF KCU10 » 9.53 11.63 0.80
    DCMT-LF

  11. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG110402FS KCU25 » 9.52 11.63 0.20 4.76 3.81
    DNGG150402FS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG-FS

  12. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150402LF KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402LF KCU10 » 12.70 15.50 0.20 - -
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  13. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150401 KC5010 » 12.70 15.50 0.10 4.76 5.16
    DNGP150401 KCU10 » 12.70 15.50 0.10 - -
    DNGP150402 KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGP150402 KCU10 » 12.70 15.50 0.20 - -
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP

  14. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150412CT KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCU10 » 12.70 15.50 1.20 - -
    DNMG150604CT KC5010 » 12.70 15.50 0.34 6.35 5.16
    DNMG150608CT KC5010 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCU10 » 12.70 15.50 0.74 - -
    DNMG150612CT KC5010 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCU10 » 12.70 15.50 1.14 - -
    DNMG-CT

  15. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG110404FF KCU10 » 9.53 11.63 0.40
    DNMG110408FF KCU10 » 9.53 11.63 0.80
    DNMG150404FF KCU10 » 12.70 15.50 0.40
    DNMG150408FF KCU10 » 12.70 15.50 0.80
    DNMG150604FF KCU10 » 12.70 15.50 0.40
    DNMG150608FF KCU10 » 12.70 15.50 0.80
    DNMG-FF

  16. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FW KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FW KCU10 » 9.53 11.63 0.40 - -
    DNMG110408FW KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG150404FW KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150408FW KC5010 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150604FW KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150608FW KC5010 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCU10 » 12.70 15.50 0.41 - -
    DNMG-FW

  17. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCU10 » 9.53 11.63 0.80 - -
    DNMG110412MP KC5010 » 9.53 11.63 1.20 4.76 3.81
    DNMG150404MP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150408MP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412MP KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MP KCU10 » 12.70 15.50 1.20 - -
    DNMG150604MP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150612MP KC5010 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MP KCU10 » 12.70 15.50 1.20 - -
    DNMG150612MP KCU25 » 12.70 15.50 1.20 6.35 5.16
    DNMG-MP

  18. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MS KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MS KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150401MS KCU10 » 12.70 15.50 0.10 - -
    DNMG150402MS KCU10 » 12.70 15.50 0.20 - -
    DNMG150402MS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNMG150404MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150404MS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150408MS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412MS KCU10 » 12.70 15.50 1.20 - -
    DNMG150412MS KCU25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150604MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150612MS KCU10 » 12.70 15.50 1.20 - -
    DNMG150612MS KCU25 » 12.70 15.50 1.20 6.35 5.16
    DNMG-MS

  19. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150412RP KCU10 » 12.70 15.50 1.20 - -
    DNMG150416RP KCU10 » 12.70 15.50 1.60 - -
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150612RP KCU10 » 12.70 15.50 1.20 - -
    DNMG-RP

  20. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG110412UP KC5010 » 9.53 11.63 1.20 4.76 3.81
    DNMG150404UP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCU10 » 12.70 15.50 0.40 - -
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150412UP KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCU10 » 12.70 15.50 1.20 - -
    DNMG150604UP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150612UP KC5010 » 12.70 15.50 1.20 6.35 5.16
    DNMG-UP

  21. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070201LF KC5010 » 6.35 7.75 0.10 2.38 2.80
    DPGT070201LF KC5025 » 6.35 7.75 0.10 2.38 2.80
    DPGT070201LF KCU10 » 6.35 7.75 0.10 - -
    DPGT070202LF KC5010 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202LF KC5025 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202LF KCU10 » 6.35 7.75 0.20 - -
    DPGT070204LF KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KC5025 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KCU10 » 6.35 7.75 0.40 - -
    DPGT11T301LF KC5010 » 9.53 11.63 0.10 3.97 4.40
    DPGT11T301LF KC5025 » 9.53 11.63 0.10 3.97 4.40
    DPGT11T301LF KCU10 » 9.53 11.63 0.10 - -
    DPGT11T302LF KC5010 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T302LF KC5025 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T302LF KCU10 » 9.53 11.63 0.20 - -
    DPGT11T304LF KC5010 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KC5025 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KCU10 » 9.53 11.63 0.40 - -
    DPGT11T308LF KC5010 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5025 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DPGT-LF

  22. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070202HP KCU10 » 6.35 7.75 0.20 - -
    DPGT070202HP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DPGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DPGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DPGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DPGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPGT-HP

  23. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070202FP KCU10 » 6.35 7.75 0.20 2.38 2.80
    DPMT070202FP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DPMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPMT11T302FP KCU10 » 9.53 11.63 0.20 3.97 4.40
    DPMT11T302FP KCU25 » 9.53 11.63 0.20 3.97 4.40
    DPMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPMT-FP

  24. DPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070204FW KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPMT070208FW KC5010 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FW KCU10 » 6.35 7.75 0.80 - -
    DPMT-FW

  25. DPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DPMT11T308MP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT-MP

  26. RCGH

    Positive ISO insert for Medium machining.

    Product Code D  
    RCGH120400 KCU10 » 12.70
    RCGH

  27. RCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D S D1  
    RCGT0803M0HP KCU10 » 8.00 3.18 3.40
    RCGT0803M0HP KCU25 » 8.00 3.18 3.40
    RCGT10T3M0HP KCU10 » 10.00 3.97 4.40
    RCGT10T3M0HP KCU25 » 10.00 3.97 4.40
    RCGT1204M0HP KCU10 » 12.00 4.76 4.40
    RCGT1204M0HP KCU25 » 12.00 4.76 4.40
    RCGT-HP

  28. RCGT-MS

    Positive ISO insert for Medium machining.

    Product Code D S D1  
    RCGT0803M0MS KCU10 » 8.00 3.18 3.40
    RCGT0803M0MS KCU25 » 8.00 3.18 3.40
    RCGT1204M0MS KCU10 » 12.00 4.76 4.40
    RCGT1204M0MS KCU25 » 12.00 4.76 4.40
    RCGT1606M0MS KCU10 » - 6.35 5.50
    RCGT1606M0MS KCU25 » - 6.35 5.50
    RCGT-MS

  29. RCGX-ELF

    Negative ISO insert for Medium machining.

    Product Code  
    RCGX190600ELF KCU10 »
    RCGX-ELF

  30. RCMT

    Positive ISO insert for Medium machining.

    Product Code D  
    RCMT060200 KCU10 » 6.35
    RCMT0602M0 KCU10 » 6.00
    RCMT0803M0 KCU10 » 8.00
    RCMT09T300 KCU10 » 9.53
    RCMT10T3M0 KCU10 » 10.00
    RCMT1204M0 KCU10 » 12.00
    RCMT1605M0 KCU10 » 16.00
    RCMT

  31. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SCMT120404FP KCU10 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404FP KCU25 » 12.70 12.70 0.40 4.76 5.50
    SCMT120408FP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCU25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120412FP KCU10 » 12.70 12.70 1.20 4.76 5.50
    SCMT-FP

  32. SCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMT09T304MP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T308MP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT120404MP KCU10 » 12.70 12.70 0.40 4.76 5.50
    SCMT120408MP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SCMT-MP

  33. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG-FS

  34. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG150612LF KC5010 » 15.88 15.88 1.20 6.35 6.35
    SNGG150612LF KCU10 » 15.88 15.88 1.20 - -
    SNGG-LF

  35. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120404 KCU10 » 12.70 12.70 0.40 - -
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP

  36. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG120408FP KCU10 » 12.70 12.70 0.80 - -
    SNMG-FP

  37. SNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    SNMG120408MP KCU10 » 12.70 12.70 0.80
    SNMG120412MP KCU10 » 12.70 12.70 1.20
    SNMG150612MP KCU10 » 15.88 15.88 1.20
    SNMG-MP

  38. SNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120408MS KCU10 » 12.70 12.70 0.80 - -
    SNMG120408MS KCU25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412MS KCU10 » 12.70 12.70 1.20 - -
    SNMG120412MS KCU25 » 12.70 12.70 1.20 4.76 5.16
    SNMG150608MS KCU25 » 15.88 15.88 0.80 6.35 6.35
    SNMG150612MS KCU25 » 15.88 15.88 1.20 6.35 6.35
    SNMG-MS

Items 251 to 500 of 920 total

per page
Page:
  2. 1
  3. 2
  4. 3
  5. 4

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Universal Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (920)
ISO Insert Range
  1. Beyond Premium (920)
Material Machining
  1. Steel (3005)
  2. Stainless Steel (1512)
  3. Cast Iron (1598)
  4. Aluminium (127)
  5. HRSA (1132)
Insert Type
  1. Negative (402)
  2. Positive (518)
Type of Cut
  1. Fine Finishing (8)
  2. Finishing (621)
  3. Wiper Finishing (41)
  4. Medium (171)
  5. Wiper Medium (8)
  6. Rough Positive (17)
  7. Rough (54)
Tip Style
  1. CCGT (30)
  2. CCMT (24)
  3. CDG (6)
  4. CDHBS (12)
  5. CDHHS (16)
  6. CDT (2)
  7. CNGG (17)
  8. CNGP (4)
  9. CNMG (85)
  10. CPG (2)
  11. CPGH (15)
  12. CPGT (20)
  13. CPMT (25)
  14. DCGT (15)
  15. DCMT (19)
  16. DNGG (11)
  17. DNGP (12)
  18. DNMG (83)
  19. DPGT (31)
  20. DPMT (16)
  21. RCGH (1)
  22. RCGT (12)
  23. RCGX (1)
  24. RCMT (7)
  25. SCMT (13)
  26. SNGG (7)
  27. SNGP (2)
  28. SNMG (18)
  29. SPGT (2)
  30. SPMT (6)
  31. TCGT (17)
  32. TCMT (47)
  33. TDHB (15)
  34. TDHH (14)
  35. TNGG (6)
  36. TNGP (2)
  37. TNMG (49)
  38. TPCB (10)
  39. TPCG (7)
  40. TPCH (4)
  41. TPGH (10)
  42. TPGT (29)
  43. TPMT (26)
  44. VBGT (25)
  45. VBMT (16)
  46. VNGG (12)
  47. VNGP (4)
  48. VNMG (29)
  49. WCMT (7)
  50. WNGG (8)
  51. WNMG (52)
  52. WPGT (3)
  53. WPGTS (4)
  54. WPMT (7)
  55. WPMTS (3)
Radius°
  1. 0.05 (8)
  2. 0.10 (38)
  3. 0.20 (144)
  4. 0.34 (1)
  5. 0.40 (281)
  6. 0.74 (2)
  7. 0.80 (287)
  8. 1.14 (2)
  9. 1.20 (88)
  10. 1.60 (20)
  11. 2.40 (2)
  12. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...