GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

151 Item(s)

per page

Set Descending Direction

  1. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FF KC5010 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FF KCU10 » 9.53 9.67 0.40 - -
    CNMG090308FF KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FF KCU10 » 9.53 9.67 0.80 - -
    CNMG120404FF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCU10 » 12.70 12.90 0.40 - -
    CNMG120408FF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCU10 » 12.70 12.90 0.80 - -
    CNMG-FF

  2. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FN KCK05 » 9.53 9.67 0.40 3.18 3.81
    CNMG090308FN KCK05 » 9.53 9.67 0.80 3.18 3.81
    CNMG120402FN KC5010 » 12.70 12.90 0.20 4.76 5.16
    CNMG120402FN KCU10 » 12.70 12.90 0.20 - -
    CNMG120404FN KCK05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408FN KCK05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412FN KCK05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416FN KCK05 » 12.70 12.90 1.60 4.76 5.16
    CNMG-FN

  3. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090308MP KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCU10 » 9.53 9.67 0.80 - -
    CNMG120404MP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCU10 » 12.70 12.90 0.40 - -
    CNMG120408MP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MP KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412MP KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KC5025 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412MP KCU10 » 12.70 12.90 1.20 - -
    CNMG120412MP KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416MP KC5010 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416MP KCU10 » 12.70 12.90 1.60 - -
    CNMG160608MP KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCU10 » 15.88 16.12 0.80 - -
    CNMG160612MP KC5010 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612MP KCU10 » 15.88 16.12 1.20 - -
    CNMG160612MP KCU25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160616MP KC5010 » 15.88 16.12 1.60 6.35 6.35
    CNMG160616MP KCU10 » 15.88 16.12 1.60 - -
    CNMG190608MP KC5010 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MP KCU10 » 19.05 19.34 0.80 - -
    CNMG190612MP KC5010 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612MP KCU10 » 19.05 19.34 1.20 - -
    CNMG190612MP KCU25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190616MP KC5010 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616MP KCU10 » 19.05 19.34 1.60 - -
    CNMG-MP

  4. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120401MS KCU10 » 12.70 12.90 0.10 - -
    CNMG120401MS KCU25 » 12.70 12.90 0.10 4.76 5.16
    CNMG120402MS KCU25 » 12.70 12.90 0.20 4.76 5.16
    CNMG120404MS KCU10 » 12.70 12.90 0.40 - -
    CNMG120404MS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408MS KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412MS KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416MS KCU10 » 12.70 12.90 1.60 - -
    CNMG120416MS KCU25 » 12.70 12.90 1.60 4.76 5.16
    CNMG160608MS KCU10 » 15.88 16.12 0.80 - -
    CNMG160608MS KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160612MS KCU10 » 15.88 16.12 1.20 - -
    CNMG160612MS KCU25 » 15.88 16.12 1.20 6.35 6.35
    CNMG190608MS KCU10 » 19.05 19.34 0.80 - -
    CNMG190608MS KCU25 » 19.05 19.34 0.80 6.35 7.93
    CNMG190612MS KCU25 » 19.05 19.34 1.20 - -
    CNMG190616MS KCU10 » 19.05 19.34 1.60 - -
    CNMG190616MS KCU25 » 19.05 19.34 1.60 6.35 7.93
    CNMG-MS

  5. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG120412FP KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FP KCU10 » 12.70 12.90 1.20 - -
    CNMG-FP

  6. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FW KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCU10 » 12.70 12.90 0.40 - -
    CNMG120408FW KCU10 » 12.70 12.90 0.80 - -
    CNMG120412FW KCU10 » 12.70 12.90 1.20 - -
    CNMG-FW

  7. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120404RP KCK20 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404RP KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408RP KCK05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCK15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCK15B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCK20 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408RP KCU25 » 12.70 12.90 0.80 - -
    CNMG120412RP KCK05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCK15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCK15B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCK20 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412RP KCU10 » 12.70 12.90 1.20 - -
    CNMG120412RP KCU25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416RP KCK15 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416RP KCK20 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416RP KCU10 » 12.70 12.90 1.60 - -
    CNMG120416RP KCU25 » 12.70 12.90 1.60 4.76 5.16
    CNMG160608RP KCK20 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RP KCU10 » 15.88 16.12 0.80 - -
    CNMG160608RP KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160612RP KCK05 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCK15 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCK20 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612RP KCU10 » 15.88 16.12 1.20 - -
    CNMG160612RP KCU25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160616RP KCK20 » 15.88 16.12 1.60 6.35 6.35
    CNMG160616RP KCU10 » 15.88 16.12 1.60 - -
    CNMG190612RP KCK05 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCK15 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCK15B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCK20 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612RP KCU10 » 19.05 19.34 1.20 - -
    CNMG190612RP KCU25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190616RP KCK20 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616RP KCU10 » 19.05 19.34 1.60 - -
    CNMG190616RP KCU25 » 19.05 19.34 1.60 6.35 7.93
    CNMG-RP

  8. CNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120404UN KCK05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK15B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK20 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408UN KCK05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UN KCK15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UN KCK15B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UN KCK20 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412UN KCK05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK15B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK20 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416UN KCK05 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416UN KCK15 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416UN KCK15B » 12.70 12.90 1.60 4.76 5.16
    CNMG120416UN KCK20 » 12.70 12.90 1.60 4.76 5.16
    CNMG160608UN KCK05 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UN KCK15 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UN KCK15B » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UN KCK20 » 15.88 16.12 0.80 6.35 6.35
    CNMG160612UN KCK05 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UN KCK15 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UN KCK15B » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UN KCK20 » 15.88 16.12 1.20 6.35 6.35
    CNMG160616UN KCK05 » 15.88 16.12 1.60 6.35 6.35
    CNMG160616UN KCK15 » 15.88 16.12 1.60 6.35 6.35
    CNMG160616UN KCK15B » 15.88 16.12 1.60 6.35 6.35
    CNMG160616UN KCK20 » 15.88 16.12 1.60 6.35 6.35
    CNMG190608UN KCK05 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608UN KCK15 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608UN KCK15B » 19.05 19.34 0.80 6.35 7.93
    CNMG190608UN KCK20 » 19.05 19.34 0.80 6.35 7.93
    CNMG190612UN KCK05 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UN KCK15 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UN KCK15B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UN KCK20 » 19.05 19.34 1.20 6.35 7.93
    CNMG190616UN KCK05 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616UN KCK15 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616UN KCK20 » 19.05 19.34 1.60 6.35 7.93
    CNMG-UN

  9. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG-CT

151 Item(s)

per page

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Cast Iron Remove This Item
  2. Tip Style: CNMG Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (151)
ISO Insert Range
  1. Beyond Premium (151)
Material Machining
  1. Steel (337)
  2. Stainless Steel (163)
  3. HRSA (96)
  4. Universal (85)
Insert Type
  1. Negative (151)
Type of Cut
  1. Fine Finishing (8)
  2. Finishing (16)
  3. Wiper Finishing (4)
  4. Medium (46)
  5. Rough Positive (38)
  6. Rough (39)
Tip Style
  1. CCGT (30)
  2. CCMT (82)
  3. CCMW (5)
  4. CDG (6)
  5. CDHBS (12)
  6. CDHHS (16)
  7. CDT (2)
  8. CNGG (17)
  9. CNGP (4)
  10. CNMA (27)
  11. CPG (2)
  12. CPGH (15)
  13. CPGT (20)
  14. CPMT (57)
  15. DCGT (15)
  16. DCMT (51)
  17. DNGG (11)
  18. DNGP (12)
  19. DNMA (17)
  20. DNMG (134)
  21. DPGT (31)
  22. DPMT (28)
  23. RCGH (1)
  24. RCGT (12)
  25. RCGX (1)
  26. RCMT (20)
  27. RNMA (3)
  28. RNMG (4)
  29. SCMT (45)
  30. SCMW (4)
  31. SNGG (7)
  32. SNGP (2)
  33. SNMA (20)
  34. SNMG (63)
  35. SPGT (2)
  36. SPMT (21)
  37. TCGT (17)
  38. TCMT (82)
  39. TCMW (2)
  40. TDHB (15)
  41. TDHH (14)
  42. TNGG (6)
  43. TNGP (2)
  44. TNMA (18)
  45. TNMG (91)
  46. TPCB (10)
  47. TPCG (7)
  48. TPCH (4)
  49. TPGH (10)
  50. TPGT (29)
  51. TPMT (59)
  52. VBGT (25)
  53. VBMT (34)
  54. VNGG (12)
  55. VNGP (4)
  56. VNMG (45)
  57. WCMT (7)
  58. WNGG (8)
  59. WNMA (18)
  60. WNMG (86)
  61. WPGT (3)
  62. WPGTS (4)
  63. WPMT (12)
  64. WPMTS (3)
Radius°
  1. 0.10 (2)
  2. 0.20 (3)
  3. 0.40 (21)
  4. 0.80 (47)
  5. 1.20 (47)
  6. 1.60 (31)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...