GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 336 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

  1. CCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060208HP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CCGT120408HP K313 » 12.70 12.90 0.80 4.76 5.50
    CCGT120408HP KCU10 » 12.70 12.90 0.80 - -
    CCGT120408HP KCU25 » 12.70 12.90 0.80 4.76 5.50
    CCGT-HP

  2. CCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060208LF KC5010 » 6.35 6.45 0.80 2.38 2.80
    CCGT060208LF KCU10 » 6.35 6.45 0.80 - -
    CCGT09T308LF KC5025 » 9.53 9.67 0.80 3.97 4.40
    CCGT09T308LF KCU10 » 9.53 9.67 0.80 - -
    CCGT-LF

  3. CCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT060208FP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CCMT060208FP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CCMT09T308FP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308FP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CCMT120408FP KCU10 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408FP KCU25 » 12.70 12.90 0.80 4.76 5.50
    CCMT-FP

  4. CCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT09T308MP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CCMT120408MP KCU10 » 12.70 12.90 0.80 4.76 5.50
    CCMT-MP

  5. CCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CCMT09T308MW KCU10 » 9.53 9.67 0.80
    CCMT120408MW KCU10 » 12.70 12.90 0.80
    CCMT-MW

  6. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408FS K313 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408FS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNGG-FS

  7. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408LF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KC730 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KCU10 » 12.70 12.90 0.80 - -
    CNGG160608LF KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNGG160608LF KCU10 » 15.88 16.12 0.80 - -
    CNGG-LF

  8. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGP120408 K10U » 12.70 12.90 0.80 - -
    CNGP120408 K313 » 12.70 12.90 0.80 4.76 5.16
    CNGP120408 KCU10 » 12.70 12.90 0.80 - -
    CNGP

  9. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090308FF KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FF KCU10 » 9.53 9.67 0.80 - -
    CNMG120408FF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCU10 » 12.70 12.90 0.80 - -
    CNMG-FF

  10. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090308MP KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCU10 » 9.53 9.67 0.80 - -
    CNMG120408MP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MP KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608MP KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCU10 » 15.88 16.12 0.80 - -
    CNMG190608MP KC5010 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MP KCU10 » 19.05 19.34 0.80 - -
    CNMG-MP

  11. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG-CT

  12. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG-FP

  13. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    CNMG120408FW KCU10 » 12.70 12.90 0.80
    CNMG-FW

  14. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120408MS K313 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MS KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608MS KCU10 » 15.88 16.12 0.80 - -
    CNMG160608MS KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG190608MS KCU10 » 19.05 19.34 0.80 - -
    CNMG190608MS KCU25 » 19.05 19.34 0.80 6.35 7.93
    CNMG-MS

  15. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120408RP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408RP KCU25 » 12.70 12.90 0.80 - -
    CNMG160608RP KC5510 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RP KCU10 » 15.88 16.12 0.80 - -
    CNMG160608RP KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG-RP

  16. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGH09T308 KC5010 » 9.53 9.67 0.80 3.97 4.40
    CPGH09T308 KC5025 » 9.53 9.67 0.80 3.97 4.40
    CPGH09T308 KCU10 » 9.53 9.67 0.80 - -
    CPGH09T308 KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPGH

  17. CPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGT060208HP KCU10 » 6.35 6.45 0.80 - -
    CPGT060208HP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CPGT09T308HP KCU10 » 9.53 9.67 0.80 - -
    CPGT09T308HP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPGT-HP

  18. CPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CPGT060208LF KCU10 » 6.35 6.45 0.80
    CPGT09T308LF KCU10 » 9.53 9.67 0.80
    CPGT-LF

  19. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT060208FP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CPMT060208FP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CPMT09T308FP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPMT-FP

  20. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    CPMT060208FW KCU10 » 6.35 6.45 0.80
    CPMT09T308FW KCU10 » 9.53 9.67 0.80
    CPMT-FW

  21. CPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT060208LF K313 » 6.35 6.45 0.80 2.38 2.80
    CPMT09T308LF K313 » 9.53 9.67 0.80 3.97 4.40
    CPMT-LF

  22. CPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CPMT060208MP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CPMT09T308MP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT-MP

  23. CPMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CPMT09T308MW KCU10 » 9.53 9.67 0.80
    CPMT-MW

  24. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DCGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DCGT11T308HP K313 » 9.53 11.63 0.80 3.97 4.40
    DCGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DCGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCGT-HP

  25. DCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DCGT150408LF KCU10 » 12.70 15.50 0.80
    DCGT-LF

  26. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DCMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCMT150408FP KCU10 » 12.70 15.50 0.80 4.76 5.50
    DCMT-FP

  27. DCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    DCMT11T308FW KCU10 » 9.53 11.63 0.80
    DCMT-FW

  28. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T308LF K313 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DCMT-LF

  29. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    DCMT11T308MW KCU10 » 9.53 11.63 0.80
    DCMT-MW

  30. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408FS KC5525 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG150608FS KC5510 » 12.70 15.50 0.80 6.35 5.16
    DNGG-FS

  31. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  32. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150408 K313 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 K313 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP

  33. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG-CT

  34. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG110408FF KCU10 » 9.53 11.63 0.80
    DNMG150408FF KCU10 » 12.70 15.50 0.80
    DNMG150608FF KCU10 » 12.70 15.50 0.80
    DNMG-FF

  35. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FW KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-FW

  36. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCU10 » 9.53 11.63 0.80 - -
    DNMG150408MP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MP

  37. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MS K313 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MS KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MS KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408MS K313 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150408MS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MS K313 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MS

  38. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG-RP

  39. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG-UP

  40. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DPGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPGT11T308HP K313 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPGT-HP

  41. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308LF KC5010 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5025 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DPGT-LF

  42. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPMT-FP

  43. DPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070208FW KC5010 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FW KCU10 » 6.35 7.75 0.80 - -
    DPMT-FW

  44. DPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DPMT11T308MP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT-MP

  45. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SCMT120408FP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCU25 » 12.70 12.70 0.80 4.76 5.50
    SCMT-FP

  46. SCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMT09T308MP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT120408MP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SCMT-MP

  47. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG-FS

  48. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG-LF

  49. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP

  50. SNMA

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMA120408 K68 » 12.70 12.70 0.80 4.76 5.16
    SNMA

  51. SNMG

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120408 K68 » 12.70 12.70 0.80 4.76 5.16
    SNMG

  52. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SNMG120408FP KCU10 » 12.70 12.70 0.80
    SNMG-FP

  53. SNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    SNMG120408MP KCU10 » 12.70 12.70 0.80
    SNMG-MP

  54. SNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120408MS K313 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MS KCU10 » 12.70 12.70 0.80 - -
    SNMG120408MS KCU25 » 12.70 12.70 0.80 4.76 5.16
    SNMG150608MS KC5525 » 15.88 15.88 0.80 6.35 6.35
    SNMG150608MS KCU25 » 15.88 15.88 0.80 6.35 6.35
    SNMG-MS

  55. SPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SPGT09T308LF KCU10 » 9.53 9.53 0.80
    SPGT-LF

  56. SPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SPMT-FP

  57. SPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SPMT09T308MP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SPMT120408MP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SPMT-MP

  58. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT110208HP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCGT110208HP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCGT16T308HP K313 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T308HP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T308HP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TCGT-HP

  59. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T308LF KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT-LF

  60. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT090208FP KCU10 » 5.56 9.63 0.80 2.38 2.50
    TCMT090208FP KCU25 » 5.56 9.63 0.80 2.38 2.50
    TCMT110208FP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110308FP KCU10 » 6.35 11.00 0.80 3.18 2.80
    TCMT110308FP KCU25 » 6.35 11.00 0.80 3.18 2.80
    TCMT16T308FP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCMT16T308FP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TCMT220408FP KCU10 » 12.70 22.00 0.80 4.76 5.50
    TCMT220408FP KCU25 » 12.70 22.00 0.80 4.76 5.50
    TCMT-FP

  61. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208LF KC5010 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KC5025 » 6.35 11.00 0.80 2.38 2.80
    TCMT16T308LF KC5010 » 9.53 16.50 0.80 3.97 4.40
    TCMT16T308LF KC5025 » 9.53 16.50 0.80 3.97 4.40
    TCMT220408LF KC5010 » 12.70 22.00 0.80 4.76 5.50
    TCMT220408LF KC5025 » 12.70 22.00 0.80 4.76 5.50
    TCMT-LF

  62. TCMT-MP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208MP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCMT16T308MP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCMT-MP

  63. TCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208UF KC5010 » 6.35 11.00 0.80 2.38 2.80
    TCMT16T308UF KC5010 » 9.53 16.50 0.80 3.97 4.40
    TCMT-UF

  64. TDHB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHB07T1208 KC5010 » 4.06 7.04 0.79 1.19 2.39
    TDHB07T1208 KC5025 » 4.06 7.04 0.79 1.19 2.39
    TDHB07T1208 KCU10 » 4.06 7.04 0.79 - -
    TDHB

  65. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG160408FS KC5525 » 9.53 16.50 0.80 4.76 3.81
    TNGG160408FS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNGG220408FS KC5510 » 12.70 22.00 0.80 4.76 5.16
    TNGG220408FS KCU10 » 12.70 22.00 0.80 - -
    TNGG220408FS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNGG-FS

  66. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    TNGP160408 KCU10 » 9.53 16.50 0.80
    TNGP

  67. TNMA

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMA160408 K68 » 9.53 16.50 0.80 4.76 3.81
    TNMA220408 K68 » 12.70 22.00 0.80 4.76 5.16
    TNMA

  68. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110308FF KC5010 » 6.35 11.00 0.80 3.18 2.26
    TNMG160408FF KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCU10 » 9.53 16.50 0.80 - -
    TNMG-FF

  69. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FP KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG220408FP KC5010 » 12.70 22.00 0.80 4.76 5.16
    TNMG-FP

  70. TNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FW KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FW KCU10 » 9.53 16.50 0.80 - -
    TNMG-FW

  71. TNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    TNMG160408MP KCU10 » 9.53 16.50 0.80
    TNMG220408MP KCU10 » 12.70 22.00 0.80
    TNMG-MP

  72. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160408MS KCU10 » 9.53 16.50 0.80 - -
    TNMG160408MS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG220408MS K313 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MS KCU10 » 12.70 22.00 0.80 - -
    TNMG220408MS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG270608MS K313 » 15.88 27.50 0.80 6.35 6.35
    TNMG270608MS KCU25 » 15.88 27.50 0.80 6.35 6.35
    TNMG-MS

  73. TNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408RP KC5510 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCU10 » 9.53 16.50 0.80 - -
    TNMG160408RP KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG220408RP KCU10 » 12.70 22.00 0.80 - -
    TNMG220408RP KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG-RP

  74. TNMP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMP160408 K313 » 9.53 16.50 0.80 4.76 3.81
    TNMP160408 K68 » 9.53 16.50 0.80 4.76 3.81
    TNMP220408 K313 » 12.70 22.00 0.80 4.76 5.16
    TNMP220408 K68 » 12.70 22.00 0.80 4.76 5.16
    TNMP

  75. TPCB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPCB160308 KC5010 » 9.53 16.50 0.79 3.23 3.30
    TPCB160308 KC5025 » 9.53 16.50 0.79 3.23 3.30
    TPCB160308 KCU25 » 9.53 16.50 0.79 3.23 3.30
    TPCB

  76. TPCG-L

    Positive ISO insert for Finishing machining.

    Product Code D Rε S D1  
    TPCG110208L KC5010 » 6.35 0.79 2.44 3.30
    TPCG-L

  77. TPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGH160308 KC5010 » 9.53 16.50 0.80 3.18 3.33
    TPGH160308 KC5025 » 9.53 16.50 0.80 3.18 3.33
    TPGH160308 KCU10 » 9.53 16.50 0.80 - -
    TPGH160308 KCU25 » 9.53 16.50 0.80 3.18 3.33
    TPGH

  78. TPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGT110208HP KCU10 » 6.35 11.00 0.80 - -
    TPGT110208HP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TPGT-HP

  79. TPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGT110208LF KC5025 » 6.35 11.00 0.80 2.38 2.80
    TPGT-LF

Items 1 to 250 of 336 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: HRSA Remove This Item
  2. Radius°: 0.80 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (336)
ISO Insert Range
  1. Beyond Premium (336)
Material Machining
  1. Steel (1022)
  2. Stainless Steel (521)
  3. Cast Iron (560)
  4. Aluminium (40)
  5. Universal (287)
Insert Type
  1. Negative (184)
  2. Positive (152)
Type of Cut
  1. Fine Finishing (4)
  2. Finishing (204)
  3. Wiper Finishing (13)
  4. Medium (80)
  5. Wiper Medium (4)
  6. Rough Positive (5)
  7. Rough (26)
Tip Style
  1. CCGT (8)
  2. CCMT (10)
  3. CNGG (7)
  4. CNGP (3)
  5. CNMG (30)
  6. CPGH (4)
  7. CPGT (6)
  8. CPMT (11)
  9. DCGT (6)
  10. DCMT (8)
  11. DNGG (5)
  12. DNGP (6)
  13. DNMG (32)
  14. DPGT (8)
  15. DPMT (7)
  16. SCMT (6)
  17. SNGG (5)
  18. SNGP (1)
  19. SNMA (1)
  20. SNMG (8)
  21. SPGT (1)
  22. SPMT (4)
  23. TCGT (6)
  24. TCMT (20)
  25. TDHB (3)
  26. TNGG (5)
  27. TNGP (1)
  28. TNMA (2)
  29. TNMG (21)
  30. TNMP (4)
  31. TPCB (3)
  32. TPCG (1)
  33. TPGH (4)
  34. TPGT (8)
  35. TPMT (10)
  36. VBGT (4)
  37. VBMT (8)
  38. VNGG (8)
  39. VNGP (2)
  40. VNMG (13)
  41. VNMP (2)
  42. VNMS (1)
  43. WCMT (3)
  44. WNGG (2)
  45. WNMG (25)
  46. WPMT (3)
Radius°
  1. 0.05 (8)
  2. 0.10 (49)
  3. 0.20 (172)
  4. 0.34 (1)
  5. 0.40 (337)
  6. 0.74 (2)
  7. 1.14 (2)
  8. 1.20 (111)
  9. 1.60 (36)
  10. 2.40 (3)
  11. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...