GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 337 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

  1. CCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060204HP K313 » 6.35 6.45 0.40 2.38 2.80
    CCGT060204HP KCU10 » 6.35 6.45 0.40 - -
    CCGT060204HP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCGT09T304HP K313 » 9.53 9.67 0.40 3.97 4.40
    CCGT09T304HP KCU10 » 9.53 9.67 0.40 - -
    CCGT09T304HP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCGT120404HP K313 » 12.70 12.90 0.40 4.76 5.50
    CCGT120404HP KCU10 » 12.70 12.90 0.40 - -
    CCGT120404HP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCGT-HP

  2. CCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060204LF KC5025 » 6.35 6.45 0.40 2.38 2.80
    CCGT060204LF KCU10 » 6.35 6.45 0.40 - -
    CCGT0602X0LF KC5025 » 6.35 6.45 0.04 2.38 2.80
    CCGT09T304LF KCU10 » 9.53 9.67 0.40 - -
    CCGT09T3X0LF KC5025 » 9.53 9.67 0.04 3.97 4.40
    CCGT-LF

  3. CCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCMT120404FP KCU10 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCMT-FP

  4. CCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT060204MP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT09T304MP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT-MP

  5. CCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CCMT09T304MW KCU10 » 9.53 9.67 0.40
    CCMT120404MW KCU10 » 12.70 12.90 0.40
    CCMT-MW

  6. CDHBS

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHBS4T004 K313 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KCU10 » 3.97 4.03 0.38 - -
    CDHBS4T004 KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHBS

  7. CDHHS-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHHS4T004L KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004L KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-L

  8. CDHHS-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHHS4T004R KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004R KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-R

  9. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404FS K313 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404FS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNGG-FS

  10. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404LF K313 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KC730 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KCU10 » 12.70 12.90 0.40 - -
    CNGG-LF

  11. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGP120404 K10U » 12.70 12.90 0.40 - -
    CNGP120404 K313 » 12.70 12.90 0.40 4.76 5.16
    CNGP120404 KCU10 » 12.70 12.90 0.40 - -
    CNGP

  12. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FF KC5010 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FF KCU10 » 9.53 9.67 0.40 - -
    CNMG120404FF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCU10 » 12.70 12.90 0.40 - -
    CNMG-FF

  13. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG-FP

  14. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FW KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCU10 » 12.70 12.90 0.40 - -
    CNMG-FW

  15. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCU10 » 12.70 12.90 0.40 - -
    CNMG-MP

  16. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MS K313 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MS KCU10 » 12.70 12.90 0.40 - -
    CNMG120404MS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG-MS

  17. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120404RP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404RP KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG-RP

  18. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGH09T304 KC5010 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KC5025 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KCU10 » 9.53 9.67 0.40 - -
    CPGH09T304 KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGH

  19. CPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGT060204HP KC5025 » 6.35 6.45 0.40 2.38 2.80
    CPGT060204HP KCU10 » 6.35 6.45 0.40 - -
    CPGT060204HP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CPGT09T304HP KCU10 » 9.53 9.67 0.40 - -
    CPGT09T304HP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGT-HP

  20. CPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CPGT060204LF KCU10 » 6.35 6.45 0.40
    CPGT09T304LF KCU10 » 9.53 9.67 0.40
    CPGT-LF

  21. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT050204FP KCU10 » 5.56 5.65 0.40 2.38 2.50
    CPMT050204FP KCU25 » 5.56 5.65 0.40 2.38 2.50
    CPMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CPMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPMT-FP

  22. CPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT050204LF K313 » 5.56 5.65 0.40 2.38 2.65
    CPMT060204LF K313 » 6.35 6.45 0.40 2.38 2.80
    CPMT09T304LF K313 » 9.53 9.67 0.40 3.97 4.40
    CPMT-LF

  23. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    CPMT060204FW KCU10 » 6.35 6.45 0.40
    CPMT09T304FW KCU10 » 9.53 9.67 0.40
    CPMT-FW

  24. CPMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CPMT09T304MW KCU10 » 9.53 9.67 0.40
    CPMT-MW

  25. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT070204HP K313 » 6.35 7.75 0.40 2.38 2.80
    DCGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DCGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCGT11T304HP K313 » 9.53 11.63 0.40 3.97 4.40
    DCGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DCGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCGT-HP

  26. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCMT150404FP KCU10 » 12.70 15.50 0.40 4.76 5.50
    DCMT-FP

  27. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT070204LF K313 » 6.35 7.75 0.40 2.38 2.80
    DCMT11T304LF K313 » 9.53 11.63 0.40 3.97 4.40
    DCMT-LF

  28. DCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    DCMT11T304FW KCU10 » 9.53 11.63 0.40
    DCMT-FW

  29. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    DCMT11T304MW KCU10 » 9.53 11.63 0.40
    DCMT-MW

  30. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG110404FS KC5510 » 9.52 11.63 0.40 4.76 3.81
    DNGG150404FS KC5525 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150604FS KC5510 » 12.70 15.50 0.40 6.35 5.16
    DNGG150604FS KC5525 » 12.70 15.50 0.40 6.35 5.16
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG-FS

  31. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150404LF K313 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG-LF

  32. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150404 K313 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150604 K313 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP

  33. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG-CT

  34. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG110404FF KCU10 » 9.53 11.63 0.40
    DNMG150404FF KCU10 » 12.70 15.50 0.40
    DNMG150604FF KCU10 » 12.70 15.50 0.40
    DNMG-FF

  35. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FW KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FW KCU10 » 9.53 11.63 0.40 - -
    DNMG150404FW KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150408FW KC5010 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150604FW KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150608FW KC5010 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCU10 » 12.70 15.50 0.41 - -
    DNMG-FW

  36. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150404MP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCU10 » 12.70 15.50 0.40 - -
    DNMG-MP

  37. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150404MS K313 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150404MS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150604MS K313 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNMG-MS

  38. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150404UP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCU10 » 12.70 15.50 0.40 - -
    DNMG150604UP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG-UP

  39. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070204HP K313 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DPGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPGT11T304HP K313 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DPGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPGT-HP

  40. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070204LF KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KC5025 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KCU10 » 6.35 7.75 0.40 - -
    DPGT11T304LF KC5010 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KC5025 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KCU10 » 9.53 11.63 0.40 - -
    DPGT-LF

  41. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPMT-FP

  42. DPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070204FW KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPMT-FW

  43. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SCMT120404FP KCU10 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404FP KCU25 » 12.70 12.70 0.40 4.76 5.50
    SCMT-FP

  44. SCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMT09T304MP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SCMT120404MP KCU10 » 12.70 12.70 0.40 4.76 5.50
    SCMT-MP

  45. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SNGP120404 KCU10 » 12.70 12.70 0.40
    SNGP

  46. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG-FP

  47. SPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SPGT09T304LF KCU10 » 9.53 9.53 0.40
    SPGT-LF

  48. SPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SPMT-FP

  49. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT110204HP K313 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCGT16T304HP K313 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCGT-HP

  50. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT110204LF KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT16T304LF KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT-LF

  51. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT090204FP KCU10 » 5.56 9.63 0.40 2.38 2.50
    TCMT090204FP KCU25 » 5.56 9.63 0.40 2.38 2.50
    TCMT110204FP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110304FP KCU10 » 6.35 11.00 0.40 3.18 2.80
    TCMT110304FP KCU25 » 6.35 11.00 0.40 3.18 2.80
    TCMT16T304FP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCMT-FP

  52. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110204LF K68 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KC5025 » 6.35 11.00 0.40 2.38 2.80
    TCMT16T304LF KC5010 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KC5025 » 9.53 16.50 0.40 3.97 4.40
    TCMT-LF

  53. TCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110204UF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT-UF

  54. TCMT-MP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T304MP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCMT-MP

  55. TDHB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHB07T1204 KC5010 » 4.06 7.04 0.38 1.19 2.39
    TDHB07T1204 KC5025 » 4.06 7.04 0.38 1.19 2.39
    TDHB07T1204 KCU10 » 4.06 7.04 0.38 - -
    TDHB07T1204 KCU25 » 4.06 7.04 0.38 1.19 2.39
    TDHB

  56. TDHH-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHH07T1204L KC5010 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204L KC5025 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204L KCU10 » 4.06 7.04 0.38 - -
    TDHH07T1204L KCU25 » 4.06 7.04 0.38 1.19 2.39
    TDHH-L

  57. TDHH-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHH07T1204R KC5010 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204R KC5025 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204R KCU10 » 4.06 7.04 0.38 - -
    TDHH07T1204R KCU25 » 4.06 7.04 0.38 1.19 2.39
    TDHH-R

  58. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG160404FS KCU10 » 9.53 16.50 0.40 - -
    TNGG160404FS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNGG-FS

  59. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    TNGP160404 KCU10 » 9.53 16.50 0.40
    TNGP

  60. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110304FF KC5010 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FF KCU10 » 6.35 11.00 0.40 - -
    TNMG160404FF KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCU10 » 9.53 16.50 0.40 - -
    TNMG-FF

  61. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160404FP KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG220404FP KC5010 » 12.70 22.00 0.40 4.76 5.16
    TNMG-FP

  62. TNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160404FW KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FW KCU10 » 9.53 16.50 0.40 - -
    TNMG-FW

  63. TNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    TNMG160404MP KCU10 » 9.53 16.50 0.40
    TNMG-MP

  64. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160404MS K313 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MS KC5510 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MS KCU10 » 9.53 16.50 0.40 - -
    TNMG160404MS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNMG220404MS KCU10 » 12.70 22.00 0.40 - -
    TNMG220404MS KCU25 » 12.70 22.00 0.40 4.76 5.16
    TNMG-MS

  65. TNMP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMP160404 K313 » 9.53 16.50 0.40 4.76 3.81
    TNMP160404 K68 » 9.53 16.50 0.40 4.76 3.81
    TNMP220404 K68 » 12.70 22.00 0.40 4.76 5.16
    TNMP

  66. TPCB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPCB160304 KC5010 » 9.53 16.50 0.40 3.18 3.18
    TPCB160304 KC5025 » 9.53 16.50 0.40 3.18 3.18
    TPCB160304 KCU25 » 9.53 16.50 0.40 3.18 3.18
    TPCB

  67. TPCG-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPCG110204L KC5010 » 6.35 11.00 0.40 2.44 3.30
    TPCG110204L KC5025 » 6.35 11.00 0.40 2.44 3.30
    TPCG110204L KCU25 » 6.35 11.00 0.40 2.44 3.30
    TPCG-L

  68. TPCH

    Positive ISO insert for Finishing machining.

    Product Code D Rε S D1  
    TPCH110204 KC5010 » 6.50 0.38 2.44 3.30
    TPCH

  69. TPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGH160304 KC5010 » 9.53 16.50 0.40 3.18 3.33
    TPGH160304 KC5025 » 9.53 16.50 0.40 3.18 3.33
    TPGH160304 KCU10 » 9.53 16.50 0.40 - -
    TPGH160304 KCU25 » 9.53 16.50 0.40 3.18 3.33
    TPGH16T304 KC5010 » 9.53 16.50 0.40 3.97 4.40
    TPGH16T304 KCU10 » 9.53 16.50 0.40 - -
    TPGH

  70. TPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGT090204LF KC5025 » 5.56 9.63 0.40 2.38 2.65
    TPGT090204LF KCU10 » 5.56 9.63 0.40 - -
    TPGT110204LF KC5025 » 6.35 11.00 0.40 2.38 2.80
    TPGT110204LF KCU10 » 6.35 11.00 0.40 - -
    TPGT-LF

  71. TPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGT110204HP K313 » 6.35 11.00 0.40 2.38 2.90
    TPGT110204HP KCU10 » 6.35 11.00 0.40 - -
    TPGT110204HP KCU25 » 6.35 11.00 0.40 2.38 2.90
    TPGT16T304HP K313 » 9.53 16.50 0.40 3.97 4.40
    TPGT-HP

Items 1 to 250 of 337 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: HRSA Remove This Item
  2. Radius°: 0.40 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (337)
ISO Insert Range
  1. Beyond Premium (337)
Material Machining
  1. Steel (766)
  2. Stainless Steel (426)
  3. Cast Iron (409)
  4. Aluminium (37)
  5. Universal (281)
Insert Type
  1. Negative (130)
  2. Positive (207)
Type of Cut
  1. Fine Finishing (4)
  2. Finishing (259)
  3. Wiper Finishing (22)
  4. Medium (42)
  5. Wiper Medium (4)
  6. Rough Positive (2)
  7. Rough (4)
Tip Style
  1. CCGT (14)
  2. CCMT (10)
  3. CDHBS (5)
  4. CDHHS (8)
  5. CNGG (6)
  6. CNGP (3)
  7. CNMG (15)
  8. CPGH (4)
  9. CPGT (7)
  10. CPMT (12)
  11. DCGT (6)
  12. DCMT (9)
  13. DNGG (9)
  14. DNGP (6)
  15. DNMG (29)
  16. DPGT (12)
  17. DPMT (5)
  18. SCMT (6)
  19. SNGP (1)
  20. SNMG (2)
  21. SPGT (1)
  22. SPMT (2)
  23. TCGT (8)
  24. TCMT (16)
  25. TDHB (4)
  26. TDHH (8)
  27. TNGG (2)
  28. TNGP (1)
  29. TNMG (15)
  30. TNMP (3)
  31. TPCB (3)
  32. TPCG (3)
  33. TPCH (1)
  34. TPGH (6)
  35. TPGT (12)
  36. TPMT (13)
  37. VBGT (13)
  38. VBMT (8)
  39. VNGG (6)
  40. VNGP (1)
  41. VNMG (10)
  42. VNMP (2)
  43. VNMS (1)
  44. WCMT (4)
  45. WNGG (3)
  46. WNMG (15)
  47. WPMT (4)
  48. WPMTS (3)
Radius°
  1. 0.05 (8)
  2. 0.10 (49)
  3. 0.20 (172)
  4. 0.34 (1)
  5. 0.74 (2)
  6. 0.80 (336)
  7. 1.14 (2)
  8. 1.20 (111)
  9. 1.60 (36)
  10. 2.40 (3)
  11. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...