GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1501 to 1750 of 4611 total

per page
Page:
  2. 5
  3. 6
  4. 7
  5. 8
  6. 9

Set Ascending Direction

  1. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208LF KCP10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCP05 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCM25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCM15 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCK20 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCK15B » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCK15 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCK05 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KC5025 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KC5010 » 6.35 11.00 0.80 2.38 2.80
    TCMT110204LF KT315 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP30 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP25B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP10B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP05 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCM35 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCM25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCM15 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCK20 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCK15B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCK15 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KC5025 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF K68 » 6.35 11.00 0.40 2.38 2.80
    TCMT110202LF KC5025 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202LF KC5010 » 6.35 11.00 0.20 2.38 2.90
    TCMT-LF

  2. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208FP KTP10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCP25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCP10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCM25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCM15 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCK20 » 6.35 11.00 0.80 2.38 2.80
    TCMT110204FP KU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KTP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP05 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCM25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCM15 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCK20 » 6.35 11.00 0.40 2.38 2.80
    TCMT110202FP KTP10 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202FP KCU25 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202FP KCU10 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202FP KCM25 » 6.35 11.00 0.20 2.38 2.90
    TCMT090208FP KCU25 » 5.56 9.63 0.80 2.38 2.50
    TCMT090208FP KCU10 » 5.56 9.63 0.80 2.38 2.50
    TCMT090204FP KCU25 » 5.56 9.63 0.40 2.38 2.50
    TCMT090204FP KCU10 » 5.56 9.63 0.40 2.38 2.50
    TCMT-FP

  3. TCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110204UF KCP25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204UF KCP10B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204UF KCP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204UF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT-UF

  4. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T308LF KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T304LF KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304LF KC5410 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T302LF KCU10 » 9.53 16.50 0.20 3.97 4.40
    TCGT110204LF KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT110201LF KCU10 » 6.35 11.00 0.10 2.38 2.80
    TCGT-LF

  5. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T308HP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T308HP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T308HP KC5410 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T308HP K313 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T304HP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP KC5410 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP K313 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T302HP KCU25 » 9.53 16.50 0.20 3.97 4.40
    TCGT16T302HP KCU10 » 9.53 16.50 0.20 3.97 4.40
    TCGT110208HP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCGT110208HP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCGT110208HP KC5410 » 6.35 11.00 0.80 2.38 2.80
    TCGT110204HP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP KC5410 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP K313 » 6.35 11.00 0.40 2.38 2.80
    TCGT110202HP KCU25 » 6.35 11.00 0.20 2.38 2.80
    TCGT110202HP KCU10 » 6.35 11.00 0.20 2.38 2.80
    TCGT110202HP KC5410 » 6.35 11.00 0.20 2.38 2.80
    TCGT-HP

  6. TCGT

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT06T10411 KT325 » 6.35 11.00 0.10 2.38 2.80
    TCGT06T10211 KT325 » 6.35 11.00 0.10 2.38 2.80
    TCGT

  7. SPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SPMT120408MP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MP KCP25 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MP KCK20 » 12.70 12.70 0.80 4.76 5.50
    SPMT09T308MP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MP KCP25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MP KCM15 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MP KCK20 » 9.53 9.53 0.80 3.97 4.40
    SPMT-MP

  8. SPMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SPMT120408MF KCP30 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MF KCP25 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MF KCP10 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MF KCM25 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MF KCM15 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MF KCK20 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MF KCK15B » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MF KCK15 » 12.70 12.70 0.80 4.76 5.50
    SPMT09T308MF KCP25B » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MF KCP25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MF KCP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MF KCM25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MF KCM15 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MF KCK20 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MF KCK15B » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MF KCK15 » 9.53 9.53 0.80 3.97 4.40
    SPMT-MF

  9. SPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T308LF KT315 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP25B » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP10B » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCK20 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCK15B » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCK15 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCK05 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T304LF KT315 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304LF KCP25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304LF KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304LF KCK20 » 9.53 9.53 0.40 3.97 4.40
    SPMT-LF

  10. SPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T308FP KTP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCP25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCP05 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCK20 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCP25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCM25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCK20 » 9.53 9.53 0.40 3.97 4.40
    SPMT-FP

  11. SPMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T304UF KCP10B » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304UF KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT-UF

  12. SPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPGT09T308LF KCU10 » 9.53 9.53 0.80 - -
    SPGT09T308LF KC5410 » 9.53 9.53 0.80 3.97 4.40
    SPGT09T304LF KCU10 » 9.53 9.53 0.40 - -
    SPGT09T304LF KC5410 » 9.53 9.53 0.40 3.97 4.40
    SPGT-LF

  13. SNMS

    Negative ISO insert for Medium Roughing machining.

    Product Code D L10 Rε S D1  
    SNMS190612 KC5410 » 19.05 19.05 1.20 6.35 7.93
    SNMS190612 K68 » 19.05 19.05 1.20 6.35 7.93
    SNMS120412 KC5410 » 12.70 12.70 1.20 4.76 5.16
    SNMS120408 KC5410 » 12.70 12.70 0.80 4.76 5.16
    SNMS120408 K68 » 12.70 12.70 0.80 4.76 5.16
    SNMS

  14. SNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM250924RP KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RP KCM25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250724RP KCP40 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RP KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RP KCM25 » 25.40 25.40 2.40 7.94 9.12
    SNMM190624RP KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RP KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RP KCM25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190616RP KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCM25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190612RP KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RP KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RP KCM25 » 19.05 19.05 1.20 6.35 7.93
    SNMM150616RP KCP10 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RP KCM25 » 15.88 15.88 1.60 6.35 6.35
    SNMM150612RP KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RP KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RP KCM25 » 15.88 15.88 1.20 6.35 6.35
    SNMM120412RP KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMM120412RP KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120412RP KCM25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120408RP KCP40 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RP KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMM-RP

  15. SNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM250924RM KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP30 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP25B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP10 » 25.40 25.40 2.40 9.53 9.12
    SNMM250724RM KCP30 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RM KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RM KCP10 » 25.40 25.40 2.40 7.94 9.12
    SNMM190624RM KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RM KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RM KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190616RM KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMM190612RM KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMM150616RM KCP30 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP25B » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP25 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP10 » 15.88 15.88 1.60 6.35 6.35
    SNMM150612RM KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RM KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMM120416RM KCP30 » 12.70 12.70 1.60 4.76 5.16
    SNMM120416RM KCP25 » 12.70 12.70 1.60 4.76 5.16
    SNMM120412RM KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120408RM KCP30 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RM KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMM-RM

  16. SNMM-RH

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM250924RH KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP30 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP25B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP10B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP10 » 25.40 25.40 2.40 9.53 9.12
    SNMM250732RH KCP30 » 25.40 25.40 3.20 7.94 9.12
    SNMM250724RH KCP40 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP30 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP25B » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP10B » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP10 » 25.40 25.40 2.40 7.94 9.12
    SNMM190624RH KCP40 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP10 » 19.05 19.05 2.40 6.35 7.93
    SNMM190616RH KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMM190612RH KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMM-RH

  17. SNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG250924RN KCP30 » 25.40 25.40 2.40 9.55 9.12
    SNMG190624RN KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMG190624RN KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMG190624RN KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMG190616RN KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RN KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RN KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RN KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMG-RN

  18. SNMG-RM

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG250924RM KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMG250924RM KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMG-RM

  19. SNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG190616UN KCK20 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616UN KCK15 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616UN KCK05 » 19.05 19.05 1.60 6.35 7.93
    SNMG-UN

  20. SNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG190616RP KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCM35 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCM25 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCK20 » 19.05 19.05 1.60 6.35 7.93
    SNMG-RP

Items 1501 to 1750 of 4611 total

per page
Page:
  2. 5
  3. 6
  4. 7
  5. 8
  6. 9

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Manufacturer: Kennametal Remove This Item
Clear All

Shopping Options

ISO Insert Range
  1. Beyond Premium (4611)
Material Machining
  1. Steel (3005)
  2. Stainless Steel (1512)
  3. Cast Iron (1598)
  4. Aluminium (127)
  5. HRSA (1132)
  6. Universal (920)
Insert Type
  1. Negative (2618)
  2. Positive (1993)
Type of Cut
  1. Fine Finishing (19)
  2. Finishing (2068)
  3. Wiper Finishing (146)
  4. Medium (1046)
  5. Wiper Medium (86)
  6. Medium Roughing (5)
  7. Rough Positive (109)
  8. Rough (858)
  9. Rough Single Sided (274)
Tip Style
  1. CCGT (58)
  2. CCMT (293)
  3. CCMW (5)
  4. CDG (6)
  5. CDHBS (21)
  6. CDHHS (18)
  7. CDT (2)
  8. CNGG (30)
  9. CNGP (19)
  10. CNMA (27)
  11. CNMG (492)
  12. CNMM (130)
  13. CPG (2)
  14. CPGH (22)
  15. CPGT (32)
  16. CPMT (182)
  17. DCGT (26)
  18. DCMT (202)
  19. DNGG (23)
  20. DNGP (23)
  21. DNMA (17)
  22. DNMG (474)
  23. DNMM (26)
  24. DNMS (2)
  25. DPGT (48)
  26. DPMT (82)
  27. RCGH (4)
  28. RCGT (22)
  29. RCGX (2)
  30. RCMT (68)
  31. RNMA (6)
  32. RNMG (28)
  33. RPGT (3)
  34. SCMT (145)
  35. SCMW (4)
  36. SNGG (7)
  37. SNGP (4)
  38. SNMA (23)
  39. SNMG (288)
  40. SNMM (84)
  41. SNMS (5)
  42. SPGT (4)
  43. SPMT (51)
  44. TCGT (28)
  45. TCMT (197)
  46. TCMW (2)
  47. TDHB (18)
  48. TDHH (14)
  49. TNGG (8)
  50. TNGP (5)
  51. TNMA (22)
  52. TNMG (342)
  53. TNMM (34)
  54. TNMP (12)
  55. TNMS (5)
  56. TPCB (11)
  57. TPCG (7)
  58. TPCH (4)
  59. TPGH (10)
  60. TPGT (45)
  61. TPMT (151)
  62. VBGT (39)
  63. VBMT (116)
  64. VNGG (23)
  65. VNGP (9)
  66. VNMG (128)
  67. VNMP (8)
  68. VNMS (9)
  69. WCMT (10)
  70. WNGG (9)
  71. WNMA (18)
  72. WNMG (255)
  73. WPGT (3)
  74. WPGTS (4)
  75. WPMT (30)
  76. WPMTS (4)
Radius°
  1. 0.05 (12)
  2. 0.10 (64)
  3. 0.20 (261)
  4. 0.34 (2)
  5. 0.40 (1131)
  6. 0.74 (6)
  7. 0.80 (1617)
  8. 1.14 (7)
  9. 1.20 (899)
  10. 1.60 (360)
  11. 2.40 (87)
  12. 3.20 (6)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...