GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 255 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

  1. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408FS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNGG-FS

  2. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408LF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KCU10 » 12.70 12.90 0.80 - -
    CNGG160608LF KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNGG160608LF KCU10 » 15.88 16.12 0.80 - -
    CNGG-LF

  3. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CNGP120408 KCU10 » 12.70 12.90 0.80
    CNGP

  4. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090308FF KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FF KCU10 » 9.53 9.67 0.80 - -
    CNMG120408FF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCU10 » 12.70 12.90 0.80 - -
    CNMG-FF

  5. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090308MP KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCM15 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCM25 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCU10 » 9.53 9.67 0.80 - -
    CNMG120408MP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCM35 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MP KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608MP KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCM15 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCM25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCM35 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCU10 » 15.88 16.12 0.80 - -
    CNMG190608MP KC5010 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MP KCM15 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MP KCM25 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MP KCU10 » 19.05 19.34 0.80 - -
    CNMG-MP

  6. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG-CT

  7. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408FP KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG-FP

  8. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    CNMG120408FW KCU10 » 12.70 12.90 0.80
    CNMG-FW

  9. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120408MS KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608MS KCU10 » 15.88 16.12 0.80 - -
    CNMG160608MS KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG190608MS KCU10 » 19.05 19.34 0.80 - -
    CNMG190608MS KCU25 » 19.05 19.34 0.80 6.35 7.93
    CNMG-MS

  10. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120408RP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCM35 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408RP KCU25 » 12.70 12.90 0.80 - -
    CNMG160608RP KCM15 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RP KCU10 » 15.88 16.12 0.80 - -
    CNMG160608RP KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG-RP

  11. CNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120408UP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UP KCM35 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608UP KCM15 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UP KCM25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UP KCM35 » 15.88 16.12 0.80 6.35 6.35
    CNMG190608UP KCM15 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608UP KCM25 » 19.05 19.34 0.80 6.35 7.93
    CNMG-UP

  12. CNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    CNMM120408RP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMM-RP

  13. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG-FS

  14. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  15. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP

  16. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG-CT

  17. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG110408FF KCU10 » 9.53 11.63 0.80
    DNMG150408FF KCU10 » 12.70 15.50 0.80
    DNMG150608FF KCU10 » 12.70 15.50 0.80
    DNMG-FF

  18. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FW KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-FW

  19. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCU10 » 9.53 11.63 0.80 - -
    DNMG150408MP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MP

  20. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MS KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MS KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150408MS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MS

  21. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408RP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408RP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608RP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG-RP

  22. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG-UP

  23. DNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMM-RP

  24. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG-FS

  25. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG-LF

  26. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP

  27. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120408FP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FP KCU10 » 12.70 12.70 0.80 - -
    SNMG120408FP KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG-FP

  28. SNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120408MP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MP KCM35 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MP KCU10 » 12.70 12.70 0.80 - -
    SNMG150608MP KCM15 » 15.88 15.88 0.80 6.35 6.35
    SNMG150608MP KCM25 » 15.88 15.88 0.80 6.35 6.35
    SNMG-MP

  29. SNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120408MS KCU10 » 12.70 12.70 0.80 - -
    SNMG120408MS KCU25 » 12.70 12.70 0.80 4.76 5.16
    SNMG150608MS KCU25 » 15.88 15.88 0.80 6.35 6.35
    SNMG-MS

  30. SNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG120408RP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCM35 » 12.70 12.70 0.80 4.76 5.16
    SNMG-RP

  31. SNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG120408UP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UP KCM35 » 12.70 12.70 0.80 4.76 5.16
    SNMG-UP

  32. SNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM120408RP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMM-RP

  33. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG160408FS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNGG220408FS KCU10 » 12.70 22.00 0.80 - -
    TNGG220408FS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNGG-FS

  34. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    TNGP160408 KCU10 » 9.53 16.50 0.80
    TNGP

  35. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110308FF KC5010 » 6.35 11.00 0.80 3.18 2.26
    TNMG160408FF KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCU10 » 9.53 16.50 0.80 - -
    TNMG-FF

  36. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FP KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG220408FP KC5010 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FP KT315 » 12.70 22.00 0.80 4.76 5.16
    TNMG-FP

  37. TNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FW KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FW KCU10 » 9.53 16.50 0.80 - -
    TNMG-FW

  38. TNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160408MP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCM35 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCU10 » 9.53 16.50 0.80 - -
    TNMG220408MP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MP KCU10 » 12.70 22.00 0.80 - -
    TNMG-MP

  39. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160408MS KCU10 » 9.53 16.50 0.80 - -
    TNMG160408MS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG220408MS KCU10 » 12.70 22.00 0.80 - -
    TNMG220408MS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG270608MS KCU25 » 15.88 27.50 0.80 6.35 6.35
    TNMG-MS

  40. TNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408RP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCU10 » 9.53 16.50 0.80 - -
    TNMG160408RP KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG220408RP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCU10 » 12.70 22.00 0.80 - -
    TNMG220408RP KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG-RP

  41. TNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408UP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408UP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG220408UP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UP KCM35 » 12.70 22.00 0.80 4.76 5.16
    TNMG-UP

  42. TNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    TNMM220408RP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMM-RP

  43. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160408FS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNGG-FS

  44. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160408LF KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNGG160408LF KCU10 » 9.53 16.61 0.80 - -
    VNGG220408LF KC5010 » 12.70 22.14 0.80 4.76 5.16
    VNGG220408LF KCU10 » 12.70 22.14 0.80 - -
    VNGG-LF

  45. VNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNGP220408 KCU10 » 12.70 22.14 0.80
    VNGP

  46. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNMG160408FF KCU10 » 9.53 16.61 0.80
    VNMG-FF

  47. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FP KCU10 » 9.53 16.61 0.80 - -
    VNMG-FP

  48. VNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160408MP KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MP KCM25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MP KCM35 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MP KCU10 » 9.53 16.61 0.80 - -
    VNMG-MP

  49. VNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160408MS KCU10 » 9.53 16.61 0.80 - -
    VNMG160408MS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNMG220408MS KCU25 » 12.70 22.14 0.80 4.76 5.16
    VNMG-MS

  50. VNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160408RP KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408RP KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNMG-RP

  51. VNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160408UP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408UP KCM25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408UP KCU10 » 9.53 16.61 0.80 - -
    VNMG-UP

  52. WNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080408LF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNGG080408LF KCU10 » 12.70 8.69 0.80 - -
    WNGG-LF

  53. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG060408FF KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FF KCU10 » 9.53 6.52 0.80 - -
    WNMG080408FF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FF KCU10 » 12.70 8.69 0.80 - -
    WNMG-FF

  54. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG060408FP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FP KT315 » 9.53 6.52 0.80 4.76 3.81
    WNMG080408FP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FP KT315 » 12.70 8.69 0.80 4.76 5.16
    WNMG-FP

  55. WNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG060408FW KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FW KCU10 » 9.53 6.52 0.80 - -
    WNMG080408FW KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FW KCU10 » 12.70 8.69 0.80 - -
    WNMG-FW

  56. WNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG060408MP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MP KCM25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MP KCM35 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MP KCU10 » 9.53 6.52 0.80 - -
    WNMG080408MP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCM25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCM35 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCU10 » 12.70 8.69 0.80 - -
    WNMG-MP

  57. WNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG060408MS KCU25 » 9.53 6.52 0.80 4.76 3.81
    WNMG080408MS KCU25 » 12.70 8.69 0.80 4.76 5.16
    WNMG-MS

  58. WNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG060408RP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCM25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408RP KCU25 » 9.53 6.52 0.80 4.76 3.81
    WNMG080408RP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM35 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCU10 » 12.70 8.69 0.80 - -
    WNMG-RP

  59. WNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG060408UP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408UP KCM25 » 9.53 6.52 0.80 4.76 3.81
    WNMG-UP

Items 1 to 250 of 255 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Stainless Steel Remove This Item
  2. Insert Type: Negative Remove This Item
  3. Radius°: 0.80 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (255)
ISO Insert Range
  1. Beyond Premium (255)
Material Machining
  1. Steel (561)
  2. Cast Iron (268)
  3. Aluminium (17)
  4. HRSA (184)
  5. Universal (145)
Insert Type
  1. Positive (266)
Type of Cut
  1. Fine Finishing (4)
  2. Finishing (70)
  3. Wiper Finishing (8)
  4. Medium (84)
  5. Rough Positive (8)
  6. Rough (76)
  7. Rough Single Sided (5)
Tip Style
  1. CNGG (5)
  2. CNGP (1)
  3. CNMG (52)
  4. CNMM (2)
  5. DNGG (3)
  6. DNGP (4)
  7. DNMG (52)
  8. DNMM (1)
  9. SNGG (5)
  10. SNGP (1)
  11. SNMG (18)
  12. SNMM (1)
  13. TNGG (3)
  14. TNGP (1)
  15. TNMG (36)
  16. TNMM (1)
  17. VNGG (5)
  18. VNGP (1)
  19. VNMG (18)
  20. WNGG (2)
  21. WNMG (43)
Radius°
  1. 0.10 (14)
  2. 0.20 (27)
  3. 0.34 (1)
  4. 0.40 (141)
  5. 0.74 (2)
  6. 1.14 (2)
  7. 1.20 (206)
  8. 1.60 (62)
  9. 2.40 (7)
  10. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...