GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 521 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction

  1. CCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060208HP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CCGT120408HP KCU10 » 12.70 12.90 0.80 - -
    CCGT120408HP KCU25 » 12.70 12.90 0.80 4.76 5.50
    CCGT-HP

  2. CCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060208LF KC5010 » 6.35 6.45 0.80 2.38 2.80
    CCGT060208LF KCU10 » 6.35 6.45 0.80 - -
    CCGT09T308LF KC5025 » 9.53 9.67 0.80 3.97 4.40
    CCGT09T308LF KCU10 » 9.53 9.67 0.80 - -
    CCGT-LF

  3. CCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT060208FP KCM15 » 6.35 6.45 0.80 2.38 2.80
    CCMT060208FP KCM25 » 6.35 6.45 0.80 2.38 2.80
    CCMT060208FP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CCMT060208FP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CCMT09T308FP KCM15 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308FP KCM25 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308FP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308FP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308FP KU10 » 9.53 9.67 0.80 3.97 4.40
    CCMT120408FP KCM15 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408FP KCM25 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408FP KCU10 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408FP KCU25 » 12.70 12.90 0.80 4.76 5.50
    CCMT-FP

  4. CCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT060208LF KCM15 » 6.35 6.45 0.80 2.38 2.80
    CCMT060208LF KCM25 » 6.35 6.45 0.80 2.38 2.80
    CCMT09T308LF KCM15 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308LF KCM25 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308LF KCM35 » 9.53 9.67 0.80 3.97 4.40
    CCMT120408LF KCM15 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408LF KCM25 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408LF KCM35 » 12.70 12.90 0.80 4.76 5.50
    CCMT-LF

  5. CCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT09T308MF KCM15 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308MF KCM25 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308MF KCM35 » 9.53 9.67 0.80 3.97 4.40
    CCMT120408MF KCM15 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408MF KCM25 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408MF KCM35 » 12.70 12.90 0.80 4.76 5.50
    CCMT-MF

  6. CCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT09T308MP KCM15 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308MP KCM25 » 9.53 9.67 0.80 3.97 4.40
    CCMT09T308MP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CCMT120408MP KCM15 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408MP KCM25 » 12.70 12.90 0.80 4.76 5.50
    CCMT120408MP KCU10 » 12.70 12.90 0.80 4.76 5.50
    CCMT-MP

  7. CCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CCMT09T308MW KCU10 » 9.53 9.67 0.80
    CCMT120408MW KCU10 » 12.70 12.90 0.80
    CCMT-MW

  8. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408FS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNGG-FS

  9. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408LF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KCU10 » 12.70 12.90 0.80 - -
    CNGG160608LF KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNGG160608LF KCU10 » 15.88 16.12 0.80 - -
    CNGG-LF

  10. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CNGP120408 KCU10 » 12.70 12.90 0.80
    CNGP

  11. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090308FF KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FF KCU10 » 9.53 9.67 0.80 - -
    CNMG120408FF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCU10 » 12.70 12.90 0.80 - -
    CNMG-FF

  12. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090308MP KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCM15 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCM25 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCU10 » 9.53 9.67 0.80 - -
    CNMG120408MP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCM35 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MP KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608MP KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCM15 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCM25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCM35 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCU10 » 15.88 16.12 0.80 - -
    CNMG190608MP KC5010 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MP KCM15 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MP KCM25 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MP KCU10 » 19.05 19.34 0.80 - -
    CNMG-MP

  13. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG-CT

  14. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408FP KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG-FP

  15. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    CNMG120408FW KCU10 » 12.70 12.90 0.80
    CNMG-FW

  16. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120408MS KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608MS KCU10 » 15.88 16.12 0.80 - -
    CNMG160608MS KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG190608MS KCU10 » 19.05 19.34 0.80 - -
    CNMG190608MS KCU25 » 19.05 19.34 0.80 6.35 7.93
    CNMG-MS

  17. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120408RP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCM35 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408RP KCU25 » 12.70 12.90 0.80 - -
    CNMG160608RP KCM15 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RP KCU10 » 15.88 16.12 0.80 - -
    CNMG160608RP KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG-RP

  18. CNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120408UP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UP KCM35 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608UP KCM15 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UP KCM25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UP KCM35 » 15.88 16.12 0.80 6.35 6.35
    CNMG190608UP KCM15 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608UP KCM25 » 19.05 19.34 0.80 6.35 7.93
    CNMG-UP

  19. CNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    CNMM120408RP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMM-RP

  20. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGH09T308 KC5010 » 9.53 9.67 0.80 3.97 4.40
    CPGH09T308 KC5025 » 9.53 9.67 0.80 3.97 4.40
    CPGH09T308 KCU10 » 9.53 9.67 0.80 - -
    CPGH09T308 KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPGH

  21. CPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGT060208HP KCU10 » 6.35 6.45 0.80 - -
    CPGT060208HP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CPGT09T308HP KCU10 » 9.53 9.67 0.80 - -
    CPGT09T308HP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPGT-HP

  22. CPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CPGT060208LF KCU10 » 6.35 6.45 0.80
    CPGT09T308LF KCU10 » 9.53 9.67 0.80
    CPGT-LF

  23. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT060208FP KCM15 » 6.35 6.45 0.80 2.38 2.80
    CPMT060208FP KCM25 » 6.35 6.45 0.80 2.38 2.80
    CPMT060208FP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CPMT060208FP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CPMT09T308FP KCM15 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCM25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPMT-FP

  24. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    CPMT060208FW KCU10 » 6.35 6.45 0.80
    CPMT09T308FW KCU10 » 9.53 9.67 0.80
    CPMT-FW

  25. CPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT060208LF KCM15 » 6.35 6.45 0.80 2.38 2.80
    CPMT060208LF KCM25 » 6.35 6.45 0.80 2.38 2.80
    CPMT09T308LF KCM15 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCM25 » 9.53 9.67 0.80 3.97 4.40
    CPMT-LF

  26. CPMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε W S D1  
    CPMT060208MF KCM15 » 6.35 6.45 0.80 6.35 2.38 2.80
    CPMT060208MF KCM25 » 6.35 6.45 0.80 6.35 2.38 2.80
    CPMT09T308MF KCM15 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCM25 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCM35 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT-MF

  27. CPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CPMT060208MP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CPMT09T308MP KCM15 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308MP KCM25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308MP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT-MP

  28. CPMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CPMT09T308MW KCU10 » 9.53 9.67 0.80
    CPMT-MW

  29. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DCGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DCGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DCGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCGT-HP

  30. DCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DCGT150408LF KCU10 » 12.70 15.50 0.80
    DCGT-LF

  31. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT070208FP KCM25 » 6.35 7.75 0.80 2.38 2.80
    DCMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DCMT11T308FP KCM15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCMT150408FP KCM25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCU10 » 12.70 15.50 0.80 4.76 5.50
    DCMT-FP

  32. DCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    DCMT11T308FW KCU10 » 9.53 11.63 0.80
    DCMT-FW

  33. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T308LF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCM35 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DCMT-LF

  34. DCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T308MF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCM35 » 9.53 11.63 0.80 3.97 4.40
    DCMT-MF

  35. DCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T308MP KCM15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MP KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT-MP

  36. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    DCMT11T308MW KCU10 » 9.53 11.63 0.80
    DCMT-MW

  37. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG-FS

  38. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  39. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP

  40. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG-CT

  41. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG110408FF KCU10 » 9.53 11.63 0.80
    DNMG150408FF KCU10 » 12.70 15.50 0.80
    DNMG150608FF KCU10 » 12.70 15.50 0.80
    DNMG-FF

  42. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FW KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-FW

  43. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCU10 » 9.53 11.63 0.80 - -
    DNMG150408MP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MP

  44. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MS KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MS KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150408MS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MS

  45. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408RP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408RP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608RP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG-RP

  46. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG-UP

  47. DNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMM-RP

  48. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DPGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPGT-HP

  49. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308LF KC5010 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5025 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DPGT-LF

  50. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPMT11T308FP KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPMT-FP

  51. DPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070208FW KC5010 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FW KCU10 » 6.35 7.75 0.80 - -
    DPMT-FW

  52. DPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T308LF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT-LF

  53. DPMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DPMT11T308MF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MF KCM35 » 9.53 11.63 0.80 3.97 4.40
    DPMT-MF

  54. DPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DPMT11T308MP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT-MP

  55. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T308FP KCM15 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCM25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SCMT-FP

  56. SCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T308LF KCM15 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCM25 » 9.53 9.53 0.80 3.97 4.40
    SCMT-LF

  57. SCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMT09T308MF KCM15 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCM25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCM35 » 9.53 9.53 0.80 3.97 4.40
    SCMT-MF

  58. SCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMT09T308MP KCM15 » 9.53 9.53 0.80 3.97 4.40
    SCMT-MP

Items 1 to 250 of 521 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Stainless Steel Remove This Item
  2. Radius°: 0.80 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (521)
ISO Insert Range
  1. Beyond Premium (521)
Material Machining
  1. Steel (1022)
  2. Cast Iron (560)
  3. Aluminium (40)
  4. HRSA (336)
  5. Universal (287)
Insert Type
  1. Negative (255)
  2. Positive (266)
Type of Cut
  1. Fine Finishing (4)
  2. Finishing (273)
  3. Wiper Finishing (13)
  4. Medium (138)
  5. Wiper Medium (4)
  6. Rough Positive (8)
  7. Rough (76)
  8. Rough Single Sided (5)
Tip Style
  1. CCGT (7)
  2. CCMT (35)
  3. CNGG (5)
  4. CNGP (1)
  5. CNMG (52)
  6. CNMM (2)
  7. CPGH (4)
  8. CPGT (6)
  9. CPMT (24)
  10. DCGT (5)
  11. DCMT (19)
  12. DNGG (3)
  13. DNGP (4)
  14. DNMG (52)
  15. DNMM (1)
  16. DPGT (7)
  17. DPMT (13)
  18. SCMT (25)
  19. SNGG (5)
  20. SNGP (1)
  21. SNMG (18)
  22. SNMM (1)
  23. SPGT (1)
  24. SPMT (9)
  25. TCGT (5)
  26. TCMT (37)
  27. TDHB (3)
  28. TNGG (3)
  29. TNGP (1)
  30. TNMG (36)
  31. TNMM (1)
  32. TPCB (3)
  33. TPCG (1)
  34. TPGH (4)
  35. TPGT (8)
  36. TPMT (23)
  37. VBGT (3)
  38. VBMT (15)
  39. VNGG (5)
  40. VNGP (1)
  41. VNMG (18)
  42. WCMT (3)
  43. WNGG (2)
  44. WNMG (43)
  45. WPMT (6)
Radius°
  1. 0.05 (8)
  2. 0.10 (38)
  3. 0.20 (153)
  4. 0.34 (1)
  5. 0.40 (426)
  6. 0.74 (2)
  7. 1.14 (2)
  8. 1.20 (235)
  9. 1.60 (62)
  10. 2.40 (7)
  11. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...