GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 286 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

  1. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404FS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNGG-FS

  2. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404LF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KCU10 » 12.70 12.90 0.40 - -
    CNGG-LF

  3. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CNGP120404 KCU10 » 12.70 12.90 0.40
    CNGP

  4. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FF KC5010 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FF KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FF KCU10 » 9.53 9.67 0.40 - -
    CNMG090304FF KT315 » 9.53 9.67 0.40 3.18 3.81
    CNMG120404FF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FF KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FF

  5. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FN KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FN KT315 » 9.53 9.67 0.40 3.18 3.81
    CNMG120404FN KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FN

  6. CNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090304MN KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304MN KCP25 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304MN KCP25B » 9.53 9.67 0.40 3.18 3.81
    CNMG090304MN KCP30 » 9.53 9.67 0.40 3.18 3.81
    CNMG120404MN KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP30 » 12.70 12.90 0.40 4.76 5.16
    CNMG-MN

  7. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG-FP

  8. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FW KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FW KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FW

  9. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCU10 » 12.70 12.90 0.40 - -
    CNMG-MP

  10. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MS KCU10 » 12.70 12.90 0.40 - -
    CNMG120404MS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG-MS

  11. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120404RP KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404RP KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG-RP

  12. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG-FS

  13. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG-LF

  14. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP

  15. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG-CT

  16. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FF KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FF KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404FF KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FF KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150604FF KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FF KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG-FF

  17. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FN KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404FN KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150604FN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG-FN

  18. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FW KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FW KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FW KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FW KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FW KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404FW KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FW KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FW KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408FW KC5010 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCP05 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCP10 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCP10B » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150408FW KT315 » 12.70 15.50 0.41 4.76 5.16
    DNMG150604FW KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FW KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608FW KC5010 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCP05 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCP10 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCP10B » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150608FW KT315 » 12.70 15.50 0.41 6.35 5.16
    DNMG-FW

  19. DNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110404MN KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404MN KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404MN KCP10B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404MN KCP25 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404MN KCP25B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404MN KCP30 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404MN KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MN KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MN KCP10B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MN KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MN KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MN KCP30 » 12.70 15.50 0.40 4.76 5.16
    DNMG150604MN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MN KCP30 » 12.70 15.50 0.40 6.35 5.16
    DNMG-MN

  20. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150404MP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCU10 » 12.70 15.50 0.40 - -
    DNMG-MP

  21. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150404MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150404MS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150604MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNMG-MS

  22. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150404UP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCU10 » 12.70 15.50 0.40 - -
    DNMG150604UP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG-UP

  23. DNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150408MW KCP05 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408MW KCP10 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408MW KCP10B » 12.70 15.50 0.41 4.76 5.16
    DNMG150408MW KCP25 » 12.70 15.50 0.41 4.76 5.16
    DNMG150608MW KCP05 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608MW KCP10 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608MW KCP10B » 12.70 15.50 0.41 6.35 5.16
    DNMG150608MW KCP25 » 12.70 15.50 0.41 6.35 5.16
    DNMG-MW

  24. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SNGP120404 KCU10 » 12.70 12.70 0.40
    SNGP

  25. SNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090304FF KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FF KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG120404FF KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FF KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG-FF

  26. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090304FN KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP25 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG120404FN KCP05 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10B » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG-FN

  27. SNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG090304MN KCP25 » 9.53 9.53 0.40 3.18 3.81
    SNMG120404MN KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404MN KCP25 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404MN KCP25B » 12.70 12.70 0.40 4.76 5.16
    SNMG120404MN KCP30 » 12.70 12.70 0.40 4.76 5.16
    SNMG-MN

  28. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG-FP

  29. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG160404FS KCU10 » 9.53 16.50 0.40 - -
    TNGG160404FS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNGG-FS

  30. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    TNGP160404 KCU10 » 9.53 16.50 0.40
    TNGP

  31. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110304FF KC5010 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FF KCU10 » 6.35 11.00 0.40 - -
    TNMG160404FF KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FF KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG-FF

  32. TNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110304FN KCP10 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KCP25 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KT315 » 6.35 11.00 0.40 3.18 2.26
    TNMG160404FN KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP10B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP25B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG220404FN KCP10 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP25 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP25B » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KT315 » 12.70 22.00 0.40 4.76 5.16
    TNMG-FN

  33. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160404FP KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG220404FP KC5010 » 12.70 22.00 0.40 4.76 5.16
    TNMG-FP

  34. TNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160404FW KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FW KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FW KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FW KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FW KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG-FW

  35. TNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160404MN KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP10B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP25B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP30 » 9.53 16.50 0.40 4.76 3.81
    TNMG220404MN KCP10 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404MN KCP25 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404MN KCP25B » 12.70 22.00 0.40 4.76 5.16
    TNMG220404MN KCP30 » 12.70 22.00 0.40 4.76 5.16
    TNMG-MN

  36. TNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    TNMG160404MP KCU10 » 9.53 16.50 0.40
    TNMG-MP

  37. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160404MS KCU10 » 9.53 16.50 0.40 - -
    TNMG160404MS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNMG220404MS KCU10 » 12.70 22.00 0.40 - -
    TNMG220404MS KCU25 » 12.70 22.00 0.40 4.76 5.16
    TNMG-MS

  38. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160404FS KCU25 » 9.53 16.61 0.40 4.76 3.81
    VNGG-FS

  39. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160404LF KC5010 » 9.53 16.61 0.40 4.76 3.81
    VNGG160404LF KCU10 » 9.53 16.61 0.40 - -
    VNGG-LF

  40. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160404FF KCP05 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FF KCP10 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FF KCP10B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FF KCU10 » 9.53 16.61 0.40 - -
    VNMG160404FF KT315 » 9.53 16.61 0.40 4.76 3.81
    VNMG-FF

  41. VNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160404FN KCP05 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP10 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP10B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP25 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP25B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KT315 » 9.53 16.61 0.40 4.76 3.81
    VNMG-FN

  42. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160404FP KCU10 » 9.53 16.61 0.40 - -
    VNMG160404FP KT315 » 9.53 16.61 0.40 4.76 3.81
    VNMG-FP

  43. VNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160404MN KCP05 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MN KCP10 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MN KCP10B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MN KCP25 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MN KCP25B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MN KCP30 » 9.53 16.61 0.40 4.76 3.81
    VNMG-MN

  44. VNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160404MP KC5010 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MP KCU10 » 9.53 16.61 0.40 - -
    VNMG-MP

  45. VNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    VNMG160404MS KCU10 » 9.53 16.61 0.40
    VNMG-MS

Items 1 to 250 of 286 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Steel Remove This Item
  2. Insert Type: Negative Remove This Item
  3. Radius°: 0.40 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (286)
ISO Insert Range
  1. Beyond Premium (286)
Material Machining
  1. Stainless Steel (141)
  2. Cast Iron (129)
  3. Aluminium (10)
  4. HRSA (130)
  5. Universal (99)
Insert Type
  1. Positive (480)
Type of Cut
  1. Fine Finishing (10)
  2. Finishing (133)
  3. Wiper Finishing (48)
  4. Medium (78)
  5. Wiper Medium (8)
  6. Rough Positive (5)
  7. Rough (4)
Tip Style
  1. CNGG (3)
  2. CNGP (1)
  3. CNMG (46)
  4. DNGG (4)
  5. DNGP (4)
  6. DNMG (102)
  7. SNGP (1)
  8. SNMG (18)
  9. TNGG (2)
  10. TNGP (1)
  11. TNMG (43)
  12. VNGG (3)
  13. VNMG (25)
  14. VNMP (2)
  15. WNGG (2)
  16. WNMG (29)
Radius°
  1. 0.10 (14)
  2. 0.20 (28)
  3. 0.34 (2)
  4. 0.74 (6)
  5. 0.80 (561)
  6. 1.14 (7)
  7. 1.20 (492)
  8. 1.60 (221)
  9. 2.40 (80)
  10. 3.20 (5)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...