ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

Achieve higher metal removal rates
(speed, feed, and depth of cut).
Gain longer tool life.

Reliability

Deliver uniform wear for predictable tool life.
Achieve reduced depth-of-cut notching.
Virtually eliminate chip flow damage.

Versatility

Products can be applied across a wide range of applications.
Can be used in low- to high-speed applications.

Complete Portfolio

The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

CNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNGG120404FS K313 »	12.70	12.90	0.40	4.76	5.16
CNGG120404FS KCU25 »	12.70	12.90	0.40	4.76	5.16

CNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNGG120404LF K313 »	12.70	12.90	0.40	4.76	5.16
CNGG120404LF KC5010 »	12.70	12.90	0.40	4.76	5.16
CNGG120404LF KC730 »	12.70	12.90	0.40	4.76	5.16
CNGG120404LF KCU10 »	12.70	12.90	0.40	-	-

CNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNGP120404 K10U »	12.70	12.90	0.40	-	-
CNGP120404 K313 »	12.70	12.90	0.40	4.76	5.16
CNGP120404 KC5410 »	12.70	12.90	0.40	4.76	5.16
CNGP120404 KCU10 »	12.70	12.90	0.40	-	-

CNMA

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMA120404 KCK05 »	12.70	12.90	0.40	4.76	5.16
CNMA120404 KCK15 »	12.70	12.90	0.40	4.76	5.16
CNMA120404 KCK15B »	12.70	12.90	0.40	4.76	5.16
CNMA120404 KCK20 »	12.70	12.90	0.40	4.76	5.16

CNMG-FF

Negative ISO insert for Fine Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG090304FF KC5010 »	9.53	9.67	0.40	3.18	3.81
CNMG090304FF KCP10 »	9.53	9.67	0.40	3.18	3.81
CNMG090304FF KCU10 »	9.53	9.67	0.40	-	-
CNMG090304FF KT315 »	9.53	9.67	0.40	3.18	3.81
CNMG120404FF KC5010 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FF KCP05 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FF KCP10 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FF KCP10B »	12.70	12.90	0.40	4.76	5.16
CNMG120404FF KCU10 »	12.70	12.90	0.40	-	-
CNMG120404FF KT315 »	12.70	12.90	0.40	4.76	5.16

CNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG090304FN KCK05 »	9.53	9.67	0.40	3.18	3.81
CNMG090304FN KCP10 »	9.53	9.67	0.40	3.18	3.81
CNMG090304FN KT315 »	9.53	9.67	0.40	3.18	3.81
CNMG120404FN KCK05 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FN KCP05 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FN KCP10 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FN KCP10B »	12.70	12.90	0.40	4.76	5.16
CNMG120404FN KCP25 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FN KCP25B »	12.70	12.90	0.40	4.76	5.16
CNMG120404FN KT315 »	12.70	12.90	0.40	4.76	5.16

CNMG-MN

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG090304MN KCP10 »	9.53	9.67	0.40	3.18	3.81
CNMG090304MN KCP25 »	9.53	9.67	0.40	3.18	3.81
CNMG090304MN KCP25B »	9.53	9.67	0.40	3.18	3.81
CNMG090304MN KCP30 »	9.53	9.67	0.40	3.18	3.81
CNMG120404MN KCP05 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MN KCP10 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MN KCP10B »	12.70	12.90	0.40	4.76	5.16
CNMG120404MN KCP25 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MN KCP25B »	12.70	12.90	0.40	4.76	5.16
CNMG120404MN KCP30 »	12.70	12.90	0.40	4.76	5.16

CNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120404FP KC5010 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FP KCM15 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FP KCP10 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FP KCU10 »	12.70	12.90	0.40	-	-
CNMG120404FP KT315 »	12.70	12.90	0.40	4.76	5.16

CNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120404FW KC5010 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FW KCP05 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FW KCP10 »	12.70	12.90	0.40	4.76	5.16
CNMG120404FW KCP10B »	12.70	12.90	0.40	4.76	5.16
CNMG120404FW KCU10 »	12.70	12.90	0.40	-	-
CNMG120404FW KT315 »	12.70	12.90	0.40	4.76	5.16

CNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG120404MP KC5010 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MP KCM15 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MP KCM25 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MP KCM35 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MP KCU10 »	12.70	12.90	0.40	-	-

CNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG120404MS K313 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MS KCU10 »	12.70	12.90	0.40	-	-
CNMG120404MS KCU25 »	12.70	12.90	0.40	4.76	5.16

CNMG-RP

Negative ISO insert for Rough Positive machining.

Product Code	D	L10	Rε	S	D1
CNMG120404RP KCK20 »	12.70	12.90	0.40	4.76	5.16
CNMG120404RP KCM15 »	12.70	12.90	0.40	4.76	5.16
CNMG120404RP KCM25 »	12.70	12.90	0.40	4.76	5.16
CNMG120404RP KCP10 »	12.70	12.90	0.40	4.76	5.16
CNMG120404RP KCP25 »	12.70	12.90	0.40	4.76	5.16
CNMG120404RP KCP25B »	12.70	12.90	0.40	4.76	5.16
CNMG120404RP KCU10 »	12.70	12.90	0.40	-	-
CNMG120404RP KCU25 »	12.70	12.90	0.40	4.76	5.16

CNMG-UN

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
CNMG120404UN KCK05 »	12.70	12.90	0.40	4.76	5.16
CNMG120404UN KCK15 »	12.70	12.90	0.40	4.76	5.16
CNMG120404UN KCK15B »	12.70	12.90	0.40	4.76	5.16
CNMG120404UN KCK20 »	12.70	12.90	0.40	4.76	5.16

CNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
CNMG120404UP KCM15 »	12.70	12.90	0.40	4.76	5.16
CNMG120404UP KCM25 »	12.70	12.90	0.40	4.76	5.16

DNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGG110404FS KC5510 »	9.52	11.63	0.40	4.76	3.81
DNGG150404FS KC5525 »	12.70	15.50	0.40	4.76	5.16
DNGG150404FS KCU25 »	12.70	15.50	0.40	4.76	5.16
DNGG150604FS KC5510 »	12.70	15.50	0.40	6.35	5.16
DNGG150604FS KC5525 »	12.70	15.50	0.40	6.35	5.16
DNGG150604FS KCU25 »	12.70	15.50	0.40	6.35	5.16

DNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGG150404LF K313 »	12.70	15.50	0.40	4.76	5.16
DNGG150404LF KC5010 »	12.70	15.50	0.40	4.76	5.16
DNGG150404LF KCU10 »	12.70	15.50	0.40	-	-

DNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGP150404 K313 »	12.70	15.50	0.40	4.76	5.16
DNGP150404 KC5010 »	12.70	15.50	0.40	4.76	5.16
DNGP150404 KC5410 »	12.70	15.50	0.40	4.76	5.16
DNGP150404 KCU10 »	12.70	15.50	0.40	-	-
DNGP150604 K313 »	12.70	15.50	0.40	6.35	5.16
DNGP150604 KC5010 »	12.70	15.50	0.40	6.35	5.16
DNGP150604 KC5410 »	12.70	15.50	0.40	6.35	5.16
DNGP150604 KCU10 »	12.70	15.50	0.40	-	-

DNMG-CT

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG110404CT KC5010 »	9.53	11.63	0.40	4.76	3.81
DNMG150404CT KC5010 »	12.70	15.50	0.40	4.76	5.16
DNMG150404CT KCP05 »	12.70	15.50	0.40	4.76	5.16
DNMG150404CT KCP10 »	12.70	15.50	0.40	4.76	5.16
DNMG150404CT KCP25 »	12.70	15.50	0.40	4.76	5.16
DNMG150404CT KCP25B »	12.70	15.50	0.40	4.76	5.16
DNMG150404CT KCU10 »	12.70	15.50	0.40	-	-

DNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG110404FF KCP05 »	9.53	11.63	0.40	4.76	3.81
DNMG110404FF KCP10 »	9.53	11.63	0.40	4.76	3.81
DNMG110404FF KCU10 »	9.53	11.63	0.40	-	-
DNMG110404FF KT315 »	9.53	11.63	0.40	4.76	3.81
DNMG150404FF KCP05 »	12.70	15.50	0.40	4.76	5.16
DNMG150404FF KCP10 »	12.70	15.50	0.40	4.76	5.16
DNMG150404FF KCU10 »	12.70	15.50	0.40	-	-
DNMG150404FF KT315 »	12.70	15.50	0.40	4.76	5.16
DNMG150604FF KCP05 »	12.70	15.50	0.40	6.35	5.16
DNMG150604FF KCP10 »	12.70	15.50	0.40	6.35	5.16
DNMG150604FF KCP10B »	12.70	15.50	0.40	6.35	5.16
DNMG150604FF KCU10 »	12.70	15.50	0.40	-	-
DNMG150604FF KT315 »	12.70	15.50	0.40	6.35	5.16

DNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG110404FN KCK05 »	9.53	11.63	0.40	4.76	3.81
DNMG110404FN KCP05 »	9.53	11.63	0.40	4.76	3.81
DNMG110404FN KCP10 »	9.53	11.63	0.40	4.76	3.81
DNMG110404FN KCP10B »	9.53	11.63	0.40	4.76	3.81
DNMG110404FN KCP25 »	9.53	11.63	0.40	4.76	3.81
DNMG110404FN KCP25B »	9.53	11.63	0.40	4.76	3.81
DNMG110404FN KT315 »	9.53	11.63	0.40	4.76	3.81
DNMG150404FN KCK05 »	12.70	15.50	0.40	4.76	5.16
DNMG150404FN KCP05 »	12.70	15.50	0.40	4.76	5.16
DNMG150404FN KCP10 »	12.70	15.50	0.40	4.76	5.16
DNMG150404FN KCP10B »	12.70	15.50	0.40	4.76	5.16
DNMG150404FN KCP25 »	12.70	15.50	0.40	4.76	5.16
DNMG150404FN KCP25B »	12.70	15.50	0.40	4.76	5.16
DNMG150404FN KT315 »	12.70	15.50	0.40	4.76	5.16
DNMG150604FN KCK05 »	12.70	15.50	0.40	6.35	5.16
DNMG150604FN KCP05 »	12.70	15.50	0.40	6.35	5.16
DNMG150604FN KCP10 »	12.70	15.50	0.40	6.35	5.16
DNMG150604FN KCP10B »	12.70	15.50	0.40	6.35	5.16
DNMG150604FN KCP25 »	12.70	15.50	0.40	6.35	5.16
DNMG150604FN KCP25B »	12.70	15.50	0.40	6.35	5.16
DNMG150604FN KT315 »	12.70	15.50	0.40	6.35	5.16

DNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG110404FW KC5010 »	9.53	11.63	0.40	4.76	3.81
DNMG110404FW KCP05 »	9.53	11.63	0.40	4.76	3.81
DNMG110404FW KCP10 »	9.53	11.63	0.40	4.76	3.81
DNMG110404FW KCU10 »	9.53	11.63	0.40	-	-
DNMG110404FW KT315 »	9.53	11.63	0.40	4.76	3.81
DNMG150404FW KC5010 »	12.70	15.50	0.40	4.76	5.16
DNMG150404FW KCP10 »	12.70	15.50	0.40	4.76	5.16
DNMG150404FW KCU10 »	12.70	15.50	0.40	-	-
DNMG150404FW KT315 »	12.70	15.50	0.40	4.76	5.16
DNMG150408FW KC5010 »	12.70	15.50	0.41	4.76	5.16
DNMG150408FW KCP05 »	12.70	15.50	0.41	4.76	5.16
DNMG150408FW KCP10 »	12.70	15.50	0.41	4.76	5.16
DNMG150408FW KCP10B »	12.70	15.50	0.41	4.76	5.16
DNMG150408FW KCU10 »	12.70	15.50	0.41	-	-
DNMG150408FW KT315 »	12.70	15.50	0.41	4.76	5.16
DNMG150604FW KC5010 »	12.70	15.50	0.40	6.35	5.16
DNMG150604FW KCP05 »	12.70	15.50	0.40	6.35	5.16
DNMG150604FW KCP10 »	12.70	15.50	0.40	6.35	5.16
DNMG150604FW KCP10B »	12.70	15.50	0.40	6.35	5.16
DNMG150604FW KCU10 »	12.70	15.50	0.40	-	-
DNMG150604FW KT315 »	12.70	15.50	0.40	6.35	5.16
DNMG150608FW KC5010 »	12.70	15.50	0.41	6.35	5.16
DNMG150608FW KCP05 »	12.70	15.50	0.41	6.35	5.16
DNMG150608FW KCP10 »	12.70	15.50	0.41	6.35	5.16
DNMG150608FW KCP10B »	12.70	15.50	0.41	6.35	5.16
DNMG150608FW KCU10 »	12.70	15.50	0.41	-	-
DNMG150608FW KT315 »	12.70	15.50	0.41	6.35	5.16

DNMG-MN

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
DNMG110404MN KCP05 »	9.53	11.63	0.40	4.76	3.81
DNMG110404MN KCP10 »	9.53	11.63	0.40	4.76	3.81
DNMG110404MN KCP10B »	9.53	11.63	0.40	4.76	3.81
DNMG110404MN KCP25 »	9.53	11.63	0.40	4.76	3.81
DNMG110404MN KCP25B »	9.53	11.63	0.40	4.76	3.81
DNMG110404MN KCP30 »	9.53	11.63	0.40	4.76	3.81
DNMG150404MN KCP05 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MN KCP10 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MN KCP10B »	12.70	15.50	0.40	4.76	5.16
DNMG150404MN KCP25 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MN KCP25B »	12.70	15.50	0.40	4.76	5.16
DNMG150404MN KCP30 »	12.70	15.50	0.40	4.76	5.16
DNMG150604MN KCP05 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MN KCP10 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MN KCP10B »	12.70	15.50	0.40	6.35	5.16
DNMG150604MN KCP25 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MN KCP25B »	12.70	15.50	0.40	6.35	5.16
DNMG150604MN KCP30 »	12.70	15.50	0.40	6.35	5.16

DNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
DNMG150404MP KC5010 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MP KCM15 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MP KCM25 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MP KCM35 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MP KCU10 »	12.70	15.50	0.40	-	-
DNMG150604MP KC5010 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MP KCM15 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MP KCM25 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MP KCM35 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MP KCU10 »	12.70	15.50	0.40	-	-

DNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
DNMG150404MS K313 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MS KCU10 »	12.70	15.50	0.40	-	-
DNMG150404MS KCU25 »	12.70	15.50	0.40	4.76	5.16
DNMG150604MS K313 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MS KCU10 »	12.70	15.50	0.40	-	-
DNMG150604MS KCU25 »	12.70	15.50	0.40	6.35	5.16

DNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
DNMG150404UP KC5010 »	12.70	15.50	0.40	4.76	5.16
DNMG150404UP KCM15 »	12.70	15.50	0.40	4.76	5.16
DNMG150404UP KCM25 »	12.70	15.50	0.40	4.76	5.16
DNMG150404UP KCU10 »	12.70	15.50	0.40	-	-
DNMG150604UP KC5010 »	12.70	15.50	0.40	6.35	5.16
DNMG150604UP KCM15 »	12.70	15.50	0.40	6.35	5.16
DNMG150604UP KCM25 »	12.70	15.50	0.40	6.35	5.16

DNMG-MW

Negative ISO insert for Wiper Medium machining.

Product Code	D	L10	Rε	S	D1
DNMG150408MW KCP05 »	12.70	15.50	0.41	4.76	5.16
DNMG150408MW KCP10 »	12.70	15.50	0.41	4.76	5.16
DNMG150408MW KCP10B »	12.70	15.50	0.41	4.76	5.16
DNMG150408MW KCP25 »	12.70	15.50	0.41	4.76	5.16
DNMG150608MW KC9225 »	12.70	15.50	0.41	6.35	5.16
DNMG150608MW KCP05 »	12.70	15.50	0.41	6.35	5.16
DNMG150608MW KCP10 »	12.70	15.50	0.41	6.35	5.16
DNMG150608MW KCP10B »	12.70	15.50	0.41	6.35	5.16
DNMG150608MW KCP25 »	12.70	15.50	0.41	6.35	5.16

SNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
SNGP120404 KC5410 »	12.70	12.70	0.40	4.76	5.16
SNGP120404 KCU10 »	12.70	12.70	0.40	-	-

SNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
SNMG090304FF KCP10 »	9.53	9.53	0.40	3.18	3.81
SNMG090304FF KT315 »	9.53	9.53	0.40	3.18	3.81
SNMG120404FF KCP10 »	12.70	12.70	0.40	4.76	5.16
SNMG120404FF KT315 »	12.70	12.70	0.40	4.76	5.16

SNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
SNMG090304FN KCK05 »	9.53	9.53	0.40	3.18	3.81
SNMG090304FN KCP10 »	9.53	9.53	0.40	3.18	3.81
SNMG090304FN KCP25 »	9.53	9.53	0.40	3.18	3.81
SNMG090304FN KT315 »	9.53	9.53	0.40	3.18	3.81
SNMG120404FN KCK05 »	12.70	12.70	0.40	4.76	5.16
SNMG120404FN KCP05 »	12.70	12.70	0.40	4.76	5.16
SNMG120404FN KCP10 »	12.70	12.70	0.40	4.76	5.16
SNMG120404FN KCP10B »	12.70	12.70	0.40	4.76	5.16
SNMG120404FN KT315 »	12.70	12.70	0.40	4.76	5.16

SNMG-MN

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
SNMG090304MN KCP25 »	9.53	9.53	0.40	3.18	3.81
SNMG120404MN KCP10 »	12.70	12.70	0.40	4.76	5.16
SNMG120404MN KCP25 »	12.70	12.70	0.40	4.76	5.16
SNMG120404MN KCP25B »	12.70	12.70	0.40	4.76	5.16
SNMG120404MN KCP30 »	12.70	12.70	0.40	4.76	5.16

SNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
SNMG120404FP KC5010 »	12.70	12.70	0.40	4.76	5.16
SNMG120404FP KCM15 »	12.70	12.70	0.40	4.76	5.16
SNMG120404FP KCU10 »	12.70	12.70	0.40	-	-

TNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNGG160404FS KCU10 »	9.53	16.50	0.40	-	-
TNGG160404FS KCU25 »	9.53	16.50	0.40	4.76	3.81

TNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNGP160404 KC5410 »	9.53	16.50	0.40	4.76	3.81
TNGP160404 KCU10 »	9.53	16.50	0.40	-	-

TNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG110304FF KC5010 »	6.35	11.00	0.40	3.18	2.26
TNMG110304FF KCU10 »	6.35	11.00	0.40	-	-
TNMG160404FF KC5010 »	9.53	16.50	0.40	4.76	3.81
TNMG160404FF KCP05 »	9.53	16.50	0.40	4.76	3.81
TNMG160404FF KCP10 »	9.53	16.50	0.40	4.76	3.81
TNMG160404FF KCU10 »	9.53	16.50	0.40	-	-
TNMG160404FF KT315 »	9.53	16.50	0.40	4.76	3.81

TNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG110304FN KCK05 »	6.35	11.00	0.40	3.18	2.26
TNMG110304FN KCP10 »	6.35	11.00	0.40	3.18	2.26
TNMG110304FN KCP25 »	6.35	11.00	0.40	3.18	2.26
TNMG110304FN KT315 »	6.35	11.00	0.40	3.18	2.26