GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 751 to 1000 of 2068 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Set Descending Direction

  1. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150408FP KCP05 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCU10 » 12.70 15.50 0.80 4.76 5.50
    DCMT-FP

  2. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150408LF KCK05 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCK20 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP25B » 12.70 15.50 0.80 4.76 5.50
    DCMT-LF

  3. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG110402FS KC5525 » 9.52 11.63 0.20 4.76 3.81
    DNGG110402FS KCU25 » 9.52 11.63 0.20 4.76 3.81
    DNGG110404FS KC5510 » 9.52 11.63 0.40 4.76 3.81
    DNGG150401FS KC5510 » 12.70 15.50 0.10 4.76 5.16
    DNGG150402FS KC5510 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402FS KC5525 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402FS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNGG150404FS KC5525 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150408FS KC5525 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG150416FS KC5510 » 12.70 15.50 1.60 4.76 5.16
    DNGG150604FS KC5510 » 12.70 15.50 0.40 6.35 5.16
    DNGG150604FS KC5525 » 12.70 15.50 0.40 6.35 5.16
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG150608FS KC5510 » 12.70 15.50 0.80 6.35 5.16
    DNGG-FS

  4. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150402LF KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402LF KCU10 » 12.70 15.50 0.20 - -
    DNGG150404LF K313 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  5. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150401 KC5010 » 12.70 15.50 0.10 4.76 5.16
    DNGP150401 KCU10 » 12.70 15.50 0.10 - -
    DNGP150402 KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGP150402 KCU10 » 12.70 15.50 0.20 - -
    DNGP150404 K313 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150408 K313 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150604 K313 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP150608 K313 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP150612 K313 » 12.70 15.50 1.20 6.35 5.16
    DNGP

  6. DNMA

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMA110408 KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMA150408 KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMA150412 KCK05 » 12.70 15.50 1.20 4.76 5.16
    DNMA150608 KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMA150612 KCK05 » 12.70 15.50 1.20 6.35 5.16
    DNMA

  7. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150412CT KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCU10 » 12.70 15.50 1.20 - -
    DNMG150604CT KC5010 » 12.70 15.50 0.34 6.35 5.16
    DNMG150604CT KCP10 » 12.70 15.50 0.34 6.35 5.16
    DNMG150608CT KC5010 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP05 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10B » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP25 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCU10 » 12.70 15.50 0.74 - -
    DNMG150612CT KC5010 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP05 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP25 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP25B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCU10 » 12.70 15.50 1.14 - -
    DNMG-CT

  8. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FF KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FF KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408FF KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCU10 » 9.53 11.63 0.80 - -
    DNMG110408FF KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG150404FF KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FF KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408FF KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150408FF KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150604FF KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FF KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608FF KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150608FF KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FF

  9. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FN KCK05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408FN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG110412FN KCP05 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412FN KCP10 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412FN KT315 » 9.53 11.63 1.20 4.76 3.81
    DNMG150404FN KCK05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408FN KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412FN KCK05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KT315 » 12.70 15.50 1.20 4.76 5.16
    DNMG150604FN KCK05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608FN KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG150612FN KCK05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KT315 » 12.70 15.50 1.20 6.35 5.16
    DNMG-FN

  10. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070201LF KC5010 » 6.35 7.75 0.10 2.38 2.80
    DPGT070201LF KC5025 » 6.35 7.75 0.10 2.38 2.80
    DPGT070201LF KC5410 » 6.35 7.75 0.10 2.38 2.80
    DPGT070201LF KCU10 » 6.35 7.75 0.10 - -
    DPGT070201LF KT315 » 6.35 7.75 0.10 2.38 2.80
    DPGT070202LF KC5010 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202LF KC5025 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202LF KC5410 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202LF KCU10 » 6.35 7.75 0.20 - -
    DPGT070204LF KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KC5025 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KC5410 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KCU10 » 6.35 7.75 0.40 - -
    DPGT11T301LF KC5010 » 9.53 11.63 0.10 3.97 4.40
    DPGT11T301LF KC5025 » 9.53 11.63 0.10 3.97 4.40
    DPGT11T301LF KC5410 » 9.53 11.63 0.10 3.97 4.40
    DPGT11T301LF KCU10 » 9.53 11.63 0.10 - -
    DPGT11T302LF KC5010 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T302LF KC5025 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T302LF KC5410 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T302LF KCU10 » 9.53 11.63 0.20 - -
    DPGT11T304LF KC5010 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KC5025 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KC5410 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KCU10 » 9.53 11.63 0.40 - -
    DPGT11T308LF KC5010 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5025 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5410 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DPGT-LF

  11. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070202HP K313 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202HP KC5410 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202HP KCU10 » 6.35 7.75 0.20 - -
    DPGT070202HP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DPGT070204HP K313 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204HP KC5410 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DPGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPGT070208HP KC5410 » 6.35 7.75 0.80 2.38 2.80
    DPGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DPGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPGT11T304HP K313 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304HP KC5410 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DPGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T308HP K313 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308HP KC5410 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPGT-HP

  12. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070202FP KCU10 » 6.35 7.75 0.20 2.38 2.80
    DPMT070202FP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DPMT070204FP KCM15 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCM25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCP10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCP25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KTP10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPMT11T302FP KCU10 » 9.53 11.63 0.20 3.97 4.40
    DPMT11T302FP KCU25 » 9.53 11.63 0.20 3.97 4.40
    DPMT11T304FP KCM15 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCM25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCP10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCP25 » 9.53 11.63 0.40 3.97 4.40
    DPMT-FP

  13. DPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070204LF KCK05 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCK20 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCM15 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCM25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP10B » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP25B » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP30 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KT315 » 6.35 7.75 0.40 2.38 2.80
    DPMT11T302LF KT315 » 9.53 11.63 0.20 3.97 4.40
    DPMT-LF

Items 751 to 1000 of 2068 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Type of Cut: Finishing Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (2068)
ISO Insert Range
  1. Beyond Premium (2068)
Material Machining
  1. Steel (1427)
  2. Stainless Steel (832)
  3. Cast Iron (843)
  4. Aluminium (100)
  5. HRSA (729)
  6. Universal (621)
Insert Type
  1. Negative (530)
  2. Positive (1538)
Type of Cut
  1. Fine Finishing (19)
  2. Wiper Finishing (146)
  3. Medium (1046)
  4. Wiper Medium (86)
  5. Medium Roughing (5)
  6. Rough Positive (109)
  7. Rough (858)
  8. Rough Single Sided (274)
Tip Style
  1. CCGT (58)
  2. CCMT (178)
  3. CCMW (5)
  4. CDG (6)
  5. CDHBS (21)
  6. CDHHS (18)
  7. CDT (2)
  8. CNGG (30)
  9. CNGP (19)
  10. CNMA (8)
  11. CNMG (62)
  12. CPG (2)
  13. CPGH (22)
  14. CPGT (32)
  15. CPMT (121)
  16. DCGT (26)
  17. DCMT (149)
  18. DNGG (23)
  19. DNGP (17)
  20. DNMA (5)
  21. DNMG (120)
  22. DPGT (48)
  23. DPMT (59)
  24. RCGT (12)
  25. SCMT (90)
  26. SNGG (7)
  27. SNGP (4)
  28. SNMG (41)
  29. SPGT (4)
  30. SPMT (28)
  31. TCGT (28)
  32. TCMT (197)
  33. TDHB (18)
  34. TDHH (14)
  35. TNGG (8)
  36. TNGP (5)
  37. TNMG (73)
  38. TPCB (11)
  39. TPCG (7)
  40. TPCH (4)
  41. TPGH (10)
  42. TPGT (45)
  43. TPMT (124)
  44. VBGT (39)
  45. VBMT (109)
  46. VNGG (23)
  47. VNGP (9)
  48. VNMG (28)
  49. WCMT (10)
  50. WNGG (9)
  51. WNMG (39)
  52. WPGT (3)
  53. WPGTS (4)
  54. WPMT (30)
  55. WPMTS (4)
Radius°
  1. 0.05 (12)
  2. 0.10 (54)
  3. 0.20 (245)
  4. 0.34 (2)
  5. 0.40 (810)
  6. 0.74 (6)
  7. 0.80 (759)
  8. 1.14 (7)
  9. 1.20 (129)
  10. 1.60 (12)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...