GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 751 to 1000 of 1427 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Set Ascending Direction

  1. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070204FP KTP10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCP25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCP10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070202FP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DPMT070202FP KCU10 » 6.35 7.75 0.20 2.38 2.80
    DPMT-FP

  2. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308LF KC5025 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5010 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T304LF KCU10 » 9.53 11.63 0.40 - -
    DPGT11T304LF KC5025 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KC5010 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T302LF KCU10 » 9.53 11.63 0.20 - -
    DPGT11T302LF KC5025 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T302LF KC5010 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T301LF KCU10 » 9.53 11.63 0.10 - -
    DPGT11T301LF KC5025 » 9.53 11.63 0.10 3.97 4.40
    DPGT11T301LF KC5010 » 9.53 11.63 0.10 3.97 4.40
    DPGT070204LF KCU10 » 6.35 7.75 0.40 - -
    DPGT070204LF KC5025 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPGT070202LF KCU10 » 6.35 7.75 0.20 - -
    DPGT070202LF KC5025 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202LF KC5010 » 6.35 7.75 0.20 2.38 2.80
    DPGT070201LF KT315 » 6.35 7.75 0.10 2.38 2.80
    DPGT070201LF KCU10 » 6.35 7.75 0.10 - -
    DPGT070201LF KC5025 » 6.35 7.75 0.10 2.38 2.80
    DPGT070201LF KC5010 » 6.35 7.75 0.10 2.38 2.80
    DPGT-LF

  3. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DPGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DPGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DPGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DPGT070202HP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202HP KCU10 » 6.35 7.75 0.20 - -
    DPGT-HP

  4. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150612FN KT315 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150608FN KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150604FN KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150412FN KT315 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150408FN KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150404FN KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG110412FN KT315 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412FN KCP10 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412FN KCP05 » 9.53 11.63 1.20 4.76 3.81
    DNMG110408FN KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110404FN KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG-FN

  5. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150612CT KCU10 » 12.70 15.50 1.14 - -
    DNMG150612CT KCP25B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP25 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP05 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KC5010 » 12.70 15.50 1.14 6.35 5.16
    DNMG150608CT KCU10 » 12.70 15.50 0.74 - -
    DNMG150608CT KCP25 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10B » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP05 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KC5010 » 12.70 15.50 0.74 6.35 5.16
    DNMG150604CT KCP10 » 12.70 15.50 0.34 6.35 5.16
    DNMG150604CT KC5010 » 12.70 15.50 0.34 6.35 5.16
    DNMG150412CT KCU10 » 12.70 15.50 1.20 - -
    DNMG150412CT KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150408CT KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG150404CT KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110408CT KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG-CT

  6. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150608FF KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150608FF KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150604FF KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FF KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150408FF KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150408FF KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150404FF KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FF KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG110408FF KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCU10 » 9.53 11.63 0.80 - -
    DNMG110408FF KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110404FF KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FF KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG-FF

  7. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150402 KCU10 » 12.70 15.50 0.20 - -
    DNGP150402 KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGP150401 KCU10 » 12.70 15.50 0.10 - -
    DNGP150401 KC5010 » 12.70 15.50 0.10 4.76 5.16
    DNGP

  8. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150402FS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNGG110402FS KCU25 » 9.52 11.63 0.20 4.76 3.81
    DNGG-FS

  9. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150402LF KCU10 » 12.70 15.50 0.20 - -
    DNGG150402LF KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGG-LF

  10. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150408LF KCP25B » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150404LF KT315 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404LF KCP25B » 12.70 15.50 0.40 4.76 5.50
    DCMT150404LF KCP25 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404LF KCP10 » 12.70 15.50 0.40 4.76 5.50
    DCMT11T312LF KT315 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312LF KCP25 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312LF KCP10B » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312LF KCP10 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T308LF KT315 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DCMT11T308LF KCP30 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP25B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP10B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP05 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T304LF KT315 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP30 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP25B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP10B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP05 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T302LF KT315 » 9.53 11.63 0.20 3.97 4.40
    DCMT-LF

  11. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150408FP KCU10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP05 » 12.70 15.50 0.80 4.76 5.50
    DCMT150404FP KCU10 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404FP KCP25B » 12.70 15.50 0.40 4.76 5.50
    DCMT150404FP KCP25 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404FP KCP10 » 12.70 15.50 0.40 4.76 5.50
    DCMT11T312FP KCU10 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T312FP KCP10 » 9.53 11.63 1.20 3.97 4.40
    DCMT11T308FP KTP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCP10B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCP05 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T304FP KTP10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCP25B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCP25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCP10B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCP10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCP05 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T302FP KTP10 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCU25 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCU10 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCP25B » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302FP KCP25 » 9.53 11.63 0.20 3.97 4.40
    DCMT-FP

  12. DCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T308UF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308UF KCP10B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308UF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308UF KCP05 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T304UF KCP25B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304UF KCP25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304UF KCP10B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304UF KCP10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304UF KCP05 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T302UF KCP25B » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302UF KCP25 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302UF KCP10B » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302UF KCP10 » 9.53 11.63 0.20 3.97 4.40
    DCMT11T302UF KCP05 » 9.53 11.63 0.20 3.97 4.40
    DCMT-UF

  13. DCMT

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T30811 KT325 » 9.53 11.63 0.80 - -
    DCMT11T30811 KT315 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T30411 KT325 » 9.53 11.63 0.40 - -
    DCMT11T30411 KT315 » 9.53 11.63 0.40 3.97 4.40
    DCMT

Items 751 to 1000 of 1427 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Steel Remove This Item
  2. Type of Cut: Finishing Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (1427)
ISO Insert Range
  1. Beyond Premium (1427)
Material Machining
  1. Stainless Steel (832)
  2. Cast Iron (843)
  3. Aluminium (100)
  4. HRSA (729)
  5. Universal (621)
Insert Type
  1. Negative (393)
  2. Positive (1034)
Type of Cut
  1. Fine Finishing (19)
  2. Wiper Finishing (134)
  3. Medium (575)
  4. Wiper Medium (75)
  5. Rough Positive (63)
  6. Rough (470)
  7. Rough Single Sided (242)
Tip Style
  1. CCGT (34)
  2. CCMT (114)
  3. CDG (6)
  4. CDHBS (15)
  5. CDHHS (18)
  6. CDT (2)
  7. CNGG (17)
  8. CNGP (4)
  9. CNMG (51)
  10. CPG (2)
  11. CPGH (21)
  12. CPGT (20)
  13. CPMT (78)
  14. DCGT (15)
  15. DCMT (105)
  16. DNGG (11)
  17. DNGP (12)
  18. DNMG (113)
  19. DPGT (32)
  20. DPMT (41)
  21. RCGT (6)
  22. SCMT (55)
  23. SNGG (7)
  24. SNGP (2)
  25. SNMG (31)
  26. SPGT (2)
  27. SPMT (20)
  28. TCGT (19)
  29. TCMT (125)
  30. TDHB (18)
  31. TDHH (14)
  32. TNGG (6)
  33. TNGP (2)
  34. TNMG (59)
  35. TPCB (11)
  36. TPCG (7)
  37. TPCH (4)
  38. TPGH (10)
  39. TPGT (29)
  40. TPMT (79)
  41. VBGT (25)
  42. VBMT (69)
  43. VNGG (12)
  44. VNGP (4)
  45. VNMG (24)
  46. WCMT (10)
  47. WNGG (8)
  48. WNMG (30)
  49. WPGT (3)
  50. WPGTS (4)
  51. WPMT (17)
  52. WPMTS (4)
Radius°
  1. 0.05 (10)
  2. 0.10 (37)
  3. 0.20 (185)
  4. 0.34 (2)
  5. 0.40 (555)
  6. 0.74 (6)
  7. 0.80 (511)
  8. 1.14 (7)
  9. 1.20 (84)
  10. 1.60 (4)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...