GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

177 Item(s)

per page

Set Descending Direction

  1. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404FS K313 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404FS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNGG-FS

  2. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404LF K313 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KC730 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KCU10 » 12.70 12.90 0.40 - -
    CNGG-LF

  3. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGP120404 K10U » 12.70 12.90 0.40 - -
    CNGP120404 K313 » 12.70 12.90 0.40 4.76 5.16
    CNGP120404 KC5410 » 12.70 12.90 0.40 4.76 5.16
    CNGP120404 KCU10 » 12.70 12.90 0.40 - -
    CNGP

  4. CNMA

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMA120404 KCK05 » 12.70 12.90 0.40 4.76 5.16
    CNMA

  5. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FN KCK05 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FN KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FN KT315 » 9.53 9.67 0.40 3.18 3.81
    CNMG120404FN KCK05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FN

  6. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCM15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FP KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FP

  7. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG110404FS KC5510 » 9.52 11.63 0.40 4.76 3.81
    DNGG150404FS KC5525 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150604FS KC5510 » 12.70 15.50 0.40 6.35 5.16
    DNGG150604FS KC5525 » 12.70 15.50 0.40 6.35 5.16
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG-FS

  8. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150404LF K313 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG-LF

  9. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150404 K313 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150604 K313 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP

  10. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG-CT

  11. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FF KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FF KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404FF KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FF KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150604FF KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FF KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG-FF

  12. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FN KCK05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404FN KCK05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150604FN KCK05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG-FN

  13. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120404 KC5410 » 12.70 12.70 0.40 4.76 5.16
    SNGP120404 KCU10 » 12.70 12.70 0.40 - -
    SNGP

  14. SNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090304FF KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FF KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG120404FF KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FF KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG-FF

  15. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090304FN KCK05 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP25 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG120404FN KCK05 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP05 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10B » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG-FN

  16. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FP KCM15 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG-FP

  17. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG160404FS KCU10 » 9.53 16.50 0.40 - -
    TNGG160404FS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNGG-FS

  18. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGP160404 KC5410 » 9.53 16.50 0.40 4.76 3.81
    TNGP160404 KCU10 » 9.53 16.50 0.40 - -
    TNGP

  19. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110304FF KC5010 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FF KCU10 » 6.35 11.00 0.40 - -
    TNMG160404FF KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FF KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG-FF

  20. TNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110304FN KCK05 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KCP10 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KCP25 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KT315 » 6.35 11.00 0.40 3.18 2.26
    TNMG160404FN KCK05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP10B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP25B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG220404FN KCK05 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP10 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP25 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP25B » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KT315 » 12.70 22.00 0.40 4.76 5.16
    TNMG-FN

  21. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160404FP KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KCM15 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG220404FP KC5010 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FP KCM15 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FP KT315 » 12.70 22.00 0.40 4.76 5.16
    TNMG-FP

  22. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160404FS K313 » 9.53 16.61 0.40 4.76 3.81
    VNGG160404FS KCU25 » 9.53 16.61 0.40 4.76 3.81
    VNGG-FS

  23. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160404LF K313 » 9.53 16.61 0.40 4.76 3.81
    VNGG160404LF KC5010 » 9.53 16.61 0.40 4.76 3.81
    VNGG160404LF KC730 » 9.53 16.61 0.40 4.76 3.81
    VNGG160404LF KCU10 » 9.53 16.61 0.40 - -
    VNGG-LF

  24. VNGP-K

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGP160404K K313 » 9.53 16.61 0.40 4.76 3.81
    VNGP-K

  25. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160404FF KCP05 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FF KCP10 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FF KCP10B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FF KCU10 » 9.53 16.61 0.40 - -
    VNMG160404FF KT315 » 9.53 16.61 0.40 4.76 3.81
    VNMG-FF

  26. VNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160404FN KCK05 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP05 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP10 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP10B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP25 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP25B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KT315 » 9.53 16.61 0.40 4.76 3.81
    VNMG-FN

  27. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160404FP KCM15 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FP KCU10 » 9.53 16.61 0.40 - -
    VNMG160404FP KT315 » 9.53 16.61 0.40 4.76 3.81
    VNMG-FP

  28. WNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080404FS KC5510 » 12.70 8.69 0.40 4.76 5.16
    WNGG-FS

  29. WNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080404LF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNGG080404LF KCU10 » 12.70 8.69 0.40 - -
    WNGG-LF

  30. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG060404FF KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FF KCP10 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FF KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FF KT315 » 9.53 6.52 0.40 4.76 3.81
    WNMG080404FF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FF KCP10 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FF KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FF KT315 » 12.70 8.69 0.40 4.76 5.16
    WNMG-FF

  31. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG060404FP KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FP KCM15 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FP KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FP KT315 » 9.53 6.52 0.40 4.76 3.81
    WNMG080404FP KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KCM15 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KCP10 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KCP25 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FP KT315 » 12.70 8.69 0.40 4.76 5.16
    WNMG-FP

177 Item(s)

per page

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Insert Type: Negative Remove This Item
  2. Type of Cut: Finishing Remove This Item
  3. Radius°: 0.40 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (177)
ISO Insert Range
  1. Beyond Premium (177)
Material Machining
  1. Steel (133)
  2. Stainless Steel (59)
  3. Cast Iron (59)
  4. Aluminium (3)
  5. HRSA (64)
  6. Universal (47)
Insert Type
  1. Positive (633)
Type of Cut
  1. Fine Finishing (10)
  2. Wiper Finishing (48)
  3. Medium (116)
  4. Wiper Medium (9)
  5. Rough Positive (8)
  6. Rough (31)
Tip Style
  1. CNGG (6)
  2. CNGP (4)
  3. CNMA (1)
  4. CNMG (15)
  5. DNGG (9)
  6. DNGP (6)
  7. DNMG (41)
  8. SNGP (2)
  9. SNMG (16)
  10. TNGG (2)
  11. TNGP (2)
  12. TNMG (30)
  13. VNGG (6)
  14. VNGP (1)
  15. VNMG (15)
  16. WNGG (3)
  17. WNMG (18)
Radius°
  1. 0.10 (18)
  2. 0.20 (33)
  3. 0.34 (2)
  4. 0.74 (6)
  5. 0.80 (203)
  6. 1.14 (7)
  7. 1.20 (71)
  8. 1.60 (12)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...