GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 393 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction

  1. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080412FP KC5010 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408FP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FP KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FP KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FP KCP25 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KCP10 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060408FP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FP KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404FP KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FP KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FP

  2. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080408FF KT315 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FF KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FF KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FF KT315 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FF KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FF KCP10 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060408FF KT315 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FF KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FF KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FF KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404FF KT315 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FF KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FF KCP10 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FF KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FF

  3. WNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080408LF KCU10 » 12.70 8.69 0.80 - -
    WNGG080408LF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNGG080404LF KCU10 » 12.70 8.69 0.40 - -
    WNGG080404LF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNGG080402LF KCU10 » 12.70 8.69 0.20 - -
    WNGG080402LF KC5010 » 12.70 8.69 0.20 4.76 5.16
    WNGG080401LF KCU10 » 12.70 8.69 0.10 - -
    WNGG080401LF KC5010 » 12.70 8.69 0.10 4.76 5.16
    WNGG-LF

  4. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FP KT315 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408FP KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG160404FP KT315 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FP KCU10 » 9.53 16.61 0.40 - -
    VNMG-FP

  5. VNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FN KT315 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FN KCP25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FN KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FN KCP05 » 9.53 16.61 0.80 4.76 3.81
    VNMG160404FN KT315 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP25B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP25 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP10B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP10 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FN KCP05 » 9.53 16.61 0.40 4.76 3.81
    VNMG-FN

  6. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FF KT315 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FF KCU10 » 9.53 16.61 0.80 - -
    VNMG160408FF KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FF KCP05 » 9.53 16.61 0.80 4.76 3.81
    VNMG160404FF KT315 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FF KCU10 » 9.53 16.61 0.40 - -
    VNMG160404FF KCP10B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FF KCP10 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404FF KCP05 » 9.53 16.61 0.40 4.76 3.81
    VNMG-FF

  7. VNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNGP220408 KCU10 » 12.70 22.14 0.80
    VNGP220404 KCU10 » - - -
    VNGP160402 KCU10 » 9.53 16.61 0.20
    VNGP160401 KCU10 » 9.53 16.61 0.10
    VNGP

  8. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG220408LF KCU10 » 12.70 22.14 0.80 - -
    VNGG220408LF KC5010 » 12.70 22.14 0.80 4.76 5.16
    VNGG160408LF KCU10 » 9.53 16.61 0.80 - -
    VNGG160408LF KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNGG160404LF KCU10 » 9.53 16.61 0.40 - -
    VNGG160404LF KC5010 » 9.53 16.61 0.40 4.76 3.81
    VNGG160402LF KCU10 » 9.53 16.61 0.20 - -
    VNGG160402LF KC5010 » 9.53 16.61 0.20 4.76 3.81
    VNGG-LF

  9. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160408FS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNGG160404FS KCU25 » 9.53 16.61 0.40 4.76 3.81
    VNGG160402FS KCU25 » 9.53 16.61 0.20 4.76 3.81
    VNGG160401FS KCU25 » 9.53 16.61 0.10 4.76 3.81
    VNGG-FS

  10. TNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220412FN KCP25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412FN KCP10B » 12.70 22.00 1.20 4.76 5.16
    TNMG220412FN KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG220408FN KT315 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KCP25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KCP10B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KCP10 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KCP05 » 12.70 22.00 0.80 4.76 5.16
    TNMG220404FN KT315 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP25B » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP25 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FN KCP10 » 12.70 22.00 0.40 4.76 5.16
    TNMG160412FN KT315 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP25B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG160408FN KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404FN KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP25B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP10B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG110308FN KCP25 » 6.35 11.00 0.80 3.18 2.26
    TNMG110308FN KCP10 » 6.35 11.00 0.80 3.18 2.26
    TNMG110304FN KT315 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KCP25 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KCP10 » 6.35 11.00 0.40 3.18 2.26
    TNMG-FN

  11. TNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220412CT KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412CT KCP05 » 12.70 22.00 1.20 4.76 5.16
    TNMG220408CT KCP10B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408CT KCP10 » 12.70 22.00 0.80 4.76 5.16
    TNMG-CT

  12. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220408FP KC5010 » 12.70 22.00 0.80 4.76 5.16
    TNMG220404FP KC5010 » 12.70 22.00 0.40 4.76 5.16
    TNMG160408FP KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404FP KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG-FP

  13. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FF KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FF KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404FF KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FF KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG110308FF KC5010 » 6.35 11.00 0.80 3.18 2.26
    TNMG110304FF KCU10 » 6.35 11.00 0.40 - -
    TNMG110304FF KC5010 » 6.35 11.00 0.40 3.18 2.26
    TNMG-FF

  14. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    TNGP160408 KCU10 » 9.53 16.50 0.80
    TNGP160404 KCU10 » 9.53 16.50 0.40
    TNGP

  15. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG220408FS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNGG220408FS KCU10 » 12.70 22.00 0.80 - -
    TNGG160408FS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNGG160404FS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNGG160404FS KCU10 » 9.53 16.50 0.40 - -
    TNGG160402FS KCU25 » 9.53 16.50 0.20 4.76 3.81
    TNGG-FS

  16. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120416FN KCP10 » 12.70 12.70 1.60 4.76 5.16
    SNMG120412FN KT315 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120408FN KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP25B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP10B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120404FN KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10B » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP05 » 12.70 12.70 0.40 4.76 5.16
    SNMG090308FN KCP25 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FN KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090304FN KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP25 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG-FN

  17. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120408FP KCU10 » 12.70 12.70 0.80 - -
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG-FP

  18. SNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120408FF KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FF KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120404FF KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FF KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG090308FF KT315 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FF KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090304FF KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FF KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG-FF

  19. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP120404 KCU10 » 12.70 12.70 0.40 - -
    SNGP

  20. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG150612LF KCU10 » 15.88 15.88 1.20 - -
    SNGG150612LF KC5010 » 15.88 15.88 1.20 6.35 6.35
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG-LF

  21. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG-FS

  22. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150612FN KT315 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150608FN KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150604FN KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150412FN KT315 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150408FN KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG-FN

  23. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150612CT KCU10 » 12.70 15.50 1.14 - -
    DNMG150612CT KCP25B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP25 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP05 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KC5010 » 12.70 15.50 1.14 6.35 5.16
    DNMG150608CT KCU10 » 12.70 15.50 0.74 - -
    DNMG150608CT KCP25 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10B » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP05 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KC5010 » 12.70 15.50 0.74 6.35 5.16
    DNMG150604CT KCP10 » 12.70 15.50 0.34 6.35 5.16
    DNMG150604CT KC5010 » 12.70 15.50 0.34 6.35 5.16
    DNMG150412CT KCU10 » 12.70 15.50 1.20 - -
    DNMG150412CT KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150408CT KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG-CT

  24. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150608FF KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150608FF KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150604FF KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FF KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150408FF KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150408FF KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG-FF

Items 1 to 250 of 393 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. ISO Insert Range: Beyond Premium Remove This Item
  2. Material Machining: Steel Remove This Item
  3. Insert Type: Negative Remove This Item
  4. Type of Cut: Finishing Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (393)
Material Machining
  1. Stainless Steel (178)
  2. Cast Iron (188)
  3. Aluminium (13)
  4. HRSA (205)
  5. Universal (149)
Insert Type
  1. Positive (1034)
Type of Cut
  1. Fine Finishing (19)
  2. Wiper Finishing (100)
  3. Medium (404)
  4. Wiper Medium (54)
  5. Rough Positive (63)
  6. Rough (458)
  7. Rough Single Sided (242)
Tip Style
  1. CNGG (17)
  2. CNGP (4)
  3. CNMG (51)
  4. DNGG (11)
  5. DNGP (12)
  6. DNMG (113)
  7. SNGG (7)
  8. SNGP (2)
  9. SNMG (31)
  10. TNGG (6)
  11. TNGP (2)
  12. TNMG (59)
  13. VNGG (12)
  14. VNGP (4)
  15. VNMG (24)
  16. WNGG (8)
  17. WNMG (30)
Radius°
  1. 0.10 (9)
  2. 0.20 (20)
  3. 0.34 (2)
  4. 0.40 (133)
  5. 0.74 (6)
  6. 0.80 (160)
  7. 1.14 (7)
  8. 1.20 (51)
  9. 1.60 (4)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...