GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 393 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

  1. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120401LF KC5010 » 12.70 12.90 0.10 4.76 5.16
    CNGG120401LF KCU10 » 12.70 12.90 0.10 - -
    CNGG120402LF KC5010 » 12.70 12.90 0.20 4.76 5.16
    CNGG120402LF KCU10 » 12.70 12.90 0.20 - -
    CNGG120404LF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KCU10 » 12.70 12.90 0.40 - -
    CNGG120408LF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KCU10 » 12.70 12.90 0.80 - -
    CNGG120412LF KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNGG120412LF KCU10 » 12.70 12.90 1.20 - -
    CNGG160608LF KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNGG160608LF KCU10 » 15.88 16.12 0.80 - -
    CNGG160612LF KC5010 » 15.88 16.12 1.20 6.35 6.35
    CNGG160612LF KCU10 » 15.88 16.12 1.20 - -
    CNGG-LF

  2. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120402FS KCU25 » 12.70 12.90 0.20 4.76 5.16
    CNGG120404FS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNGG120408FS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNGG-FS

  3. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CNGP120401 KCU10 » 12.70 12.90 0.10
    CNGP120402 KCU10 » 12.70 12.90 0.20
    CNGP120404 KCU10 » 12.70 12.90 0.40
    CNGP120408 KCU10 » 12.70 12.90 0.80
    CNGP

  4. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FN KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FN KT315 » 9.53 9.67 0.40 3.18 3.81
    CNMG090308FN KCP10 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FN KT315 » 9.53 9.67 0.80 3.18 3.81
    CNMG120402FN KC5010 » 12.70 12.90 0.20 4.76 5.16
    CNMG120402FN KCU10 » 12.70 12.90 0.20 - -
    CNMG120402FN KT315 » 12.70 12.90 0.20 4.76 5.16
    CNMG120404FN KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408FN KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412FN KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FN KT315 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416FN KCP10 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416FN KCP25 » 12.70 12.90 1.60 4.76 5.16
    CNMG-FN

  5. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG120412FP KC5010 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412FP KCU10 » 12.70 12.90 1.20 - -
    CNMG-FP

  6. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG120412CT KCP05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP10 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP10B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412CT KCP25B » 12.70 12.90 1.20 4.76 5.16
    CNMG120416CT KCP10 » 12.70 12.90 1.60 4.76 5.16
    CNMG-CT

  7. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG110402FS KCU25 » 9.52 11.63 0.20 4.76 3.81
    DNGG150402FS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG-FS

  8. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150402LF KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGG150402LF KCU10 » 12.70 15.50 0.20 - -
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  9. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150401 KC5010 » 12.70 15.50 0.10 4.76 5.16
    DNGP150401 KCU10 » 12.70 15.50 0.10 - -
    DNGP150402 KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGP150402 KCU10 » 12.70 15.50 0.20 - -
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP

  10. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150412CT KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCU10 » 12.70 15.50 1.20 - -
    DNMG150604CT KC5010 » 12.70 15.50 0.34 6.35 5.16
    DNMG150604CT KCP10 » 12.70 15.50 0.34 6.35 5.16
    DNMG150608CT KC5010 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP05 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10B » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP25 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCU10 » 12.70 15.50 0.74 - -
    DNMG150612CT KC5010 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP05 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP25 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP25B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCU10 » 12.70 15.50 1.14 - -
    DNMG-CT

  11. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FF KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FF KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408FF KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCU10 » 9.53 11.63 0.80 - -
    DNMG110408FF KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG150404FF KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FF KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408FF KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150408FF KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150604FF KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FF KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608FF KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150608FF KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FF

  12. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FN KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408FN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG110412FN KCP05 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412FN KCP10 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412FN KT315 » 9.53 11.63 1.20 4.76 3.81
    DNMG150404FN KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408FN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412FN KCP05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KT315 » 12.70 15.50 1.20 4.76 5.16
    DNMG150604FN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608FN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG150612FN KCP05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KT315 » 12.70 15.50 1.20 6.35 5.16
    DNMG-FN

  13. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG-FS

  14. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG150612LF KC5010 » 15.88 15.88 1.20 6.35 6.35
    SNGG150612LF KCU10 » 15.88 15.88 1.20 - -
    SNGG-LF

  15. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120404 KCU10 » 12.70 12.70 0.40 - -
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP

  16. SNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090304FF KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FF KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG090308FF KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FF KT315 » 9.53 9.53 0.80 3.18 3.81
    SNMG120404FF KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FF KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG120408FF KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FF KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG-FF

  17. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090304FN KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP25 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG090308FN KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FN KCP25 » 9.53 9.53 0.80 3.18 3.81
    SNMG120404FN KCP05 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10B » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG120408FN KCP05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP10B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP25B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412FN KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KT315 » 12.70 12.70 1.20 4.76 5.16
    SNMG120416FN KCP10 » 12.70 12.70 1.60 4.76 5.16
    SNMG-FN

  18. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG120408FP KCU10 » 12.70 12.70 0.80 - -
    SNMG-FP

  19. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG160402FS KCU25 » 9.53 16.50 0.20 4.76 3.81
    TNGG160404FS KCU10 » 9.53 16.50 0.40 - -
    TNGG-FS

Items 1 to 250 of 393 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Steel Remove This Item
  2. Insert Type: Negative Remove This Item
  3. Type of Cut: Finishing Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (393)
ISO Insert Range
  1. Beyond Premium (393)
Material Machining
  1. Stainless Steel (178)
  2. Cast Iron (188)
  3. Aluminium (13)
  4. HRSA (205)
  5. Universal (149)
Insert Type
  1. Positive (1034)
Type of Cut
  1. Fine Finishing (19)
  2. Wiper Finishing (100)
  3. Medium (404)
  4. Wiper Medium (54)
  5. Rough Positive (63)
  6. Rough (458)
  7. Rough Single Sided (242)
Tip Style
  1. CNGG (17)
  2. CNGP (4)
  3. CNMG (51)
  4. DNGG (11)
  5. DNGP (12)
  6. DNMG (113)
  7. SNGG (7)
  8. SNGP (2)
  9. SNMG (31)
  10. TNGG (6)
  11. TNGP (2)
  12. TNMG (59)
  13. VNGG (12)
  14. VNGP (4)
  15. VNMG (24)
  16. WNGG (8)
  17. WNMG (30)
Radius°
  1. 0.10 (9)
  2. 0.20 (20)
  3. 0.34 (2)
  4. 0.40 (133)
  5. 0.74 (6)
  6. 0.80 (160)
  7. 1.14 (7)
  8. 1.20 (51)
  9. 1.60 (4)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...