GBP
EUR
USD- Home /
- Kennametal Tools /
- Kennametal Turning Tools /
- Kennametal Turning Toolholders /
- Kennametal External /
- Kennametal ISO Toolholders /
- DDJNR2525M11KC04
Details
DDJNR2525M11KC04
Additional Information
| SKU | 2273106 |
|---|---|
| Manufacturer | Kennametal |
| Tool Group | DDJN-KC 93 DEGREE |
| Holder Style | DDJN |
| Clamping Style | Kenclamp |
| H - mm | 25.00 |
| B - mm | 25.00 |
| F - mm | 32.00 |
| L1 - mm | 150.00 |
| L2 - mm | 30.00 |
| Gauge Insert | DN..110408 |
| Insert Type | Negative |
| Torx Plus | 15 IP |
| Clamp Asssembly | CM234R ASSY |
| Slotted Pin | SSP025016M |
| Optional Lock Pin | KLM34L9IP |
| Hand of Tool | R |
Related Products
Below are the related products for this ISO Toolholder.
ISO Inserts
DNGG-FS - 3 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNGG110402FS KC5525 | 9.52 | 11.63 | 0.20 | 4.76 | 3.81 | Finishing | ||
| DNGG110402FS KCU25 | 9.52 | 11.63 | 0.20 | 4.76 | 3.81 | Finishing | ||
| DNGG110404FS KC5510 | 9.52 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing |
DNMA - 3 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMA110408 KCK05 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMA110408 KCK20 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMA110412 KCK20 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough |
DNMG-FF - 9 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMG110404FF KT315 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110408FF KT315 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110404FF KCP05 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110404FF KCP10 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110404FF KCU10 | 9.53 | 11.63 | 0.40 | 0.00 | 0.00 | Finishing | ||
| DNMG110408FF KCP05 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110408FF KCP10 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110408FF KCU10 | 9.53 | 11.63 | 0.80 | 0.00 | 0.00 | Finishing | ||
| DNMG110408FF KCP10B | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing |
DNMG-FN - 17 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMG110404FN KT315 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110408FN KT315 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110412FN KT315 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Finishing | ||
| DNMG110404FN KCK05 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110404FN KCP05 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110404FN KCP10 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110404FN KCP25 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110408FN KCK05 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110408FN KCP05 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110408FN KCP10 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110408FN KCP25 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110412FN KCP05 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Finishing | ||
| DNMG110412FN KCP10 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Finishing | ||
| DNMG110404FN KCP10B | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110404FN KCP25B | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110408FN KCP10B | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110408FN KCP25B | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing |
DNMG-CT - 5 products Negative ISO insert for Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMG110408CT KCP05 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110408CT KCP10 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110404CT KC5010 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Finishing | ||
| DNMG110408CT KC5010 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing | ||
| DNMG110408CT KCP10B | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Finishing |
DNMG-FW - 10 products Negative ISO insert for Wiper Finishing machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMG110404FW KC5010 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| DNMG110404FW KCP05 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| DNMG110404FW KCP10 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| DNMG110404FW KCU10 | 9.53 | 11.63 | 0.40 | 0.00 | 0.00 | Wiper Finishing | ||
| DNMG110404FW KT315 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Wiper Finishing | ||
| DNMG110408FW KC5010 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| DNMG110408FW KCP05 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| DNMG110408FW KCP10 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| DNMG110408FW KT315 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Wiper Finishing | ||
| DNMG110408FW KCP10B | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Wiper Finishing |
DNMG-MN - 16 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMG110404MN KCP05 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Medium | ||
| DNMG110404MN KCP10 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Medium | ||
| DNMG110404MN KCP25 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Medium | ||
| DNMG110404MN KCP30 | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Medium | ||
| DNMG110408MN KCP05 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium | ||
| DNMG110408MN KCP10 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium | ||
| DNMG110408MN KCP25 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium | ||
| DNMG110408MN KCP30 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium | ||
| DNMG110412MN KCP10 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Medium | ||
| DNMG110412MN KCP25 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Medium | ||
| DNMG110404MN KCP10B | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Medium | ||
| DNMG110404MN KCP25B | 9.53 | 11.63 | 0.40 | 4.76 | 3.81 | Medium | ||
| DNMG110408MN KCP10B | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium | ||
| DNMG110408MN KCP25B | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium | ||
| DNMG110412MN KCP10B | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Medium | ||
| DNMG110412MN KCP25B | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Medium |
DNMG-MP - 7 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMG110408MP KC5010 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium | ||
| DNMG110408MP KCM15 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium | ||
| DNMG110408MP KCM25 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium | ||
| DNMG110408MP KCU10 | 9.53 | 11.63 | 0.80 | 0.00 | 0.00 | Medium | ||
| DNMG110412MP KC5010 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Medium | ||
| DNMG110412MP KCM15 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Medium | ||
| DNMG110412MP KCM25 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Medium |
DNMG-MS - 3 products Negative ISO insert for Medium machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMG110408MS K313 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium | ||
| DNMG110408MS KCU10 | 9.53 | 11.63 | 0.80 | 0.00 | 0.00 | Medium | ||
| DNMG110408MS KCU25 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Medium |
DNMG-RP - 13 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMG110408RP KCK20 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110408RP KCM15 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110408RP KCP10 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110408RP KCP25 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110408RP KCU10 | 9.53 | 11.63 | 0.80 | 0.00 | 0.00 | Rough | ||
| DNMG110408RP KCU25 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110412RP KCK20 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough | ||
| DNMG110412RP KCM15 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough | ||
| DNMG110412RP KCP10 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough | ||
| DNMG110412RP KCP25 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough | ||
| DNMG110408RP KCP25B | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110412RP KCP10B | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough | ||
| DNMG110412RP KCP25B | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough |
DNMG-UN - 8 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMG110408UN KCK05 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110408UN KCK15 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110408UN KCK20 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110412UN KCK05 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough | ||
| DNMG110412UN KCK15 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough | ||
| DNMG110412UN KCK20 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough | ||
| DNMG110408UN KCK15B | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110412UN KCK15B | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough |
DNMG-UP - 7 products Negative ISO insert for Rough machining.
| Product Code | D | L10 | Rε | S | D1 | Type of Cut | Material Machining | |
|---|---|---|---|---|---|---|---|---|
| DNMG110408UP KC5010 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110408UP KCM15 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110408UP KCM25 | 9.53 | 11.63 | 0.80 | 4.76 | 3.81 | Rough | ||
| DNMG110408UP KCU10 | 9.53 | 11.63 | 0.80 | 0.00 | 0.00 | Rough | ||
| DNMG110412UP KC5010 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough | ||
| DNMG110412UP KCM15 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough | ||
| DNMG110412UP KCM25 | 9.53 | 11.63 | 1.20 | 4.76 | 3.81 | Rough |
ISO Select Inserts
DNMG-R - 3 products Negative ISO Select Inserts for General purpose machining.
| Product Code | L10 | Rε | Type of Cut | Material Machining | |
|---|---|---|---|---|---|
| DNMG110408R K10P | 11.63 | 0.80 | Rough Positive | ||
| DNMG110408R K25M | 11.63 | 0.80 | Rough Positive | ||
| DNMG110408R K25P | 11.63 | 0.80 | Rough Positive |
Tick the related products you wish to purchase and add to cart with this ISO Toolholder.
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
