GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 409 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

  1. CCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060204HP KCU10 » 6.35 6.45 0.40 - -
    CCGT060204HP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCGT09T304HP KCU10 » 9.53 9.67 0.40 - -
    CCGT09T304HP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCGT120404HP KCU10 » 12.70 12.90 0.40 - -
    CCGT120404HP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCGT-HP

  2. CCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT060204LF KC5025 » 6.35 6.45 0.40 2.38 2.80
    CCGT060204LF KCU10 » 6.35 6.45 0.40 - -
    CCGT0602X0LF KC5025 » 6.35 6.45 0.04 2.38 2.80
    CCGT09T304LF KCU10 » 9.53 9.67 0.40 - -
    CCGT09T3X0LF KC5025 » 9.53 9.67 0.04 3.97 4.40
    CCGT-LF

  3. CCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT060204FP KCK20 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCMT09T304FP KCK20 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCMT120404FP KCK20 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCU10 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCMT-FP

  4. CCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT060204FW KCK20 » 6.35 6.45 0.40 2.38 2.80
    CCMT09T304FW KCK20 » 9.53 9.67 0.40 3.97 4.40
    CCMT-FW

  5. CCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT060204LF KCK05 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCK15 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCK15B » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCK20 » 6.35 6.45 0.40 2.38 2.80
    CCMT09T304LF KCK15 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304LF KCK15B » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304LF KCK20 » 9.53 9.67 0.40 3.97 4.40
    CCMT120404LF KCK05 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404LF KCK20 » 12.70 12.90 0.40 4.76 5.50
    CCMT-LF

  6. CCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT060204MF KCK15 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MF KCK20 » 6.35 6.45 0.40 2.38 2.80
    CCMT09T304MF KCK15 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MF KCK15B » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MF KCK20 » 9.53 9.67 0.40 3.97 4.40
    CCMT-MF

  7. CCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT060204MP KCK20 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT09T304MP KCK20 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT-MP

  8. CCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    CCMT09T304MW KCK20 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MW KCU10 » 9.53 9.67 0.40 - -
    CCMT120404MW KCK20 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404MW KCU10 » 12.70 12.90 0.40 - -
    CCMT-MW

  9. CCMW

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMW060204 KCK20 » 6.35 6.45 0.40 2.38 2.80
    CCMW09T304 KCK20 » 9.53 9.67 0.40 3.97 4.40
    CCMW

  10. CDHBS

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHBS4T004 KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KCU10 » 3.97 4.03 0.38 - -
    CDHBS4T004 KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHBS

  11. CDHHS-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHHS4T004L KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004L KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-L

  12. CDHHS-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHHS4T004R KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004R KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-R

  13. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404FS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNGG-FS

  14. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404LF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KCU10 » 12.70 12.90 0.40 - -
    CNGG-LF

  15. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CNGP120404 KCU10 » 12.70 12.90 0.40
    CNGP

  16. CNMA

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMA120404 KCK05 » 12.70 12.90 0.40 4.76 5.16
    CNMA120404 KCK15 » 12.70 12.90 0.40 4.76 5.16
    CNMA120404 KCK15B » 12.70 12.90 0.40 4.76 5.16
    CNMA120404 KCK20 » 12.70 12.90 0.40 4.76 5.16
    CNMA

  17. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FF KC5010 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FF KCU10 » 9.53 9.67 0.40 - -
    CNMG120404FF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCU10 » 12.70 12.90 0.40 - -
    CNMG-FF

  18. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090304FN KCK05 » 9.53 9.67 0.40 3.18 3.81
    CNMG120404FN KCK05 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FN

  19. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG-FP

  20. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FW KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCU10 » 12.70 12.90 0.40 - -
    CNMG-FW

  21. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCU10 » 12.70 12.90 0.40 - -
    CNMG-MP

  22. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MS KCU10 » 12.70 12.90 0.40 - -
    CNMG120404MS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG-MS

  23. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120404RP KCK20 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404RP KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG-RP

  24. CNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120404UN KCK05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK15B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK20 » 12.70 12.90 0.40 4.76 5.16
    CNMG-UN

  25. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGH09T304 KC5010 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KC5025 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KCU10 » 9.53 9.67 0.40 - -
    CPGH09T304 KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGH

  26. CPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGT060204HP KC5025 » 6.35 6.45 0.40 2.38 2.80
    CPGT060204HP KCU10 » 6.35 6.45 0.40 - -
    CPGT060204HP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CPGT09T304HP KCU10 » 9.53 9.67 0.40 - -
    CPGT09T304HP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGT-HP

  27. CPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CPGT060204LF KCU10 » 6.35 6.45 0.40
    CPGT09T304LF KCU10 » 9.53 9.67 0.40
    CPGT-LF

  28. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT050204FP KCU10 » 5.56 5.65 0.40 2.38 2.50
    CPMT050204FP KCU25 » 5.56 5.65 0.40 2.38 2.50
    CPMT060204FP KCK20 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CPMT09T304FP KCK20 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPMT-FP

  29. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT060204FW KCK20 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FW KCU10 » 6.35 6.45 0.40 - -
    CPMT09T304FW KCK20 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FW KCU10 » 9.53 9.67 0.40 - -
    CPMT-FW

  30. CPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT060204LF KCK05 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204LF KCK15 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204LF KCK15B » 6.35 6.45 0.40 2.38 2.80
    CPMT060204LF KCK20 » 6.35 6.45 0.40 2.38 2.80
    CPMT09T304LF KCK15 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304LF KCK15B » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304LF KCK20 » 9.53 9.67 0.40 3.97 4.40
    CPMT-LF

  31. CPMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε W S D1  
    CPMT060204MF KCPK30 » 6.35 6.45 0.40 6.35 2.38 2.80
    CPMT-MF

  32. CPMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    CPMT09T304MW KCK20 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304MW KCU10 » 9.53 9.67 0.40 - -
    CPMT-MW

  33. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DCGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DCGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCGT-HP

  34. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT070204FP KCK20 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCMT11T304FP KCK20 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCMT150404FP KCU10 » 12.70 15.50 0.40 4.76 5.50
    DCMT-FP

  35. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT070204LF KCK05 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204LF KCK20 » 6.35 7.75 0.40 2.38 2.80
    DCMT11T304LF KCK05 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCK15 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCK15B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCK20 » 9.53 11.63 0.40 3.97 4.40
    DCMT150404LF KCK20 » 12.70 15.50 0.40 4.76 5.50
    DCMT-LF

  36. DCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T304FW KCK20 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FW KCU10 » 9.53 11.63 0.40 - -
    DCMT-FW

  37. DCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T304MF KCK15 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304MF KCK20 » 9.53 11.63 0.40 3.97 4.40
    DCMT-MF

  38. DCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T304MP KCK20 » 9.53 11.63 0.40 3.97 4.40
    DCMT-MP

  39. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T304MW KCK20 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304MW KCU10 » 9.53 11.63 0.40 - -
    DCMT-MW

  40. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG-FS

  41. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG-LF

  42. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP

  43. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG-CT

  44. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG110404FF KCU10 » 9.53 11.63 0.40
    DNMG150404FF KCU10 » 12.70 15.50 0.40
    DNMG150604FF KCU10 » 12.70 15.50 0.40
    DNMG-FF

  45. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FN KCK05 » 9.53 11.63 0.40 4.76 3.81
    DNMG150404FN KCK05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150604FN KCK05 » 12.70 15.50 0.40 6.35 5.16
    DNMG-FN

  46. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FW KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FW KCU10 » 9.53 11.63 0.40 - -
    DNMG150404FW KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150408FW KC5010 » 12.70 15.50 0.41 4.76 5.16
    DNMG150408FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150604FW KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150608FW KC5010 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCU10 » 12.70 15.50 0.41 - -
    DNMG-FW

  47. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150404MP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCU10 » 12.70 15.50 0.40 - -
    DNMG-MP

  48. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150404MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150404MS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150604MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNMG-MS

  49. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150404UP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCU10 » 12.70 15.50 0.40 - -
    DNMG150604UP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG-UP

  50. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DPGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DPGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPGT-HP

  51. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT070204LF KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KC5025 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KCU10 » 6.35 7.75 0.40 - -
    DPGT11T304LF KC5010 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KC5025 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KCU10 » 9.53 11.63 0.40 - -
    DPGT-LF

  52. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPMT-FP

  53. DPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070204FW KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPMT-FW

  54. DPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070204LF KCK05 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCK20 » 6.35 7.75 0.40 2.38 2.80
    DPMT11T304LF KCK05 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCK20 » 9.53 11.63 0.40 3.97 4.40
    DPMT-LF

  55. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T304FP KCK20 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SCMT120404FP KCU10 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404FP KCU25 » 12.70 12.70 0.40 4.76 5.50
    SCMT-FP

  56. SCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T304LF KCK05 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCK20 » 9.53 9.53 0.40 3.97 4.40
    SCMT120404LF KCK05 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404LF KCK20 » 12.70 12.70 0.40 4.76 5.50
    SCMT-LF

  57. SCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMT09T304MP KCK20 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304MP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SCMT120404MP KCK20 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404MP KCU10 » 12.70 12.70 0.40 4.76 5.50
    SCMT-MP

  58. SCMW

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMW09T304 KCK20 » 9.53 9.53 0.40 3.97 4.40
    SCMW

  59. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SNGP120404 KCU10 » 12.70 12.70 0.40
    SNGP

  60. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090304FN KCK05 » 9.53 9.53 0.40 3.18 3.81
    SNMG120404FN KCK05 » 12.70 12.70 0.40 4.76 5.16
    SNMG-FN

  61. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG-FP

  62. SPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SPGT09T304LF KCU10 » 9.53 9.53 0.40
    SPGT-LF

  63. SPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T304FP KCK20 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SPMT-FP

  64. SPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T304LF KCK20 » 9.53 9.53 0.40 3.97 4.40
    SPMT-LF

  65. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT110204HP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCGT16T304HP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCGT-HP

  66. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT110204LF KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT16T304LF KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT-LF

  67. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT090204FP KCU10 » 5.56 9.63 0.40 2.38 2.50
    TCMT090204FP KCU25 » 5.56 9.63 0.40 2.38 2.50
    TCMT110204FP KCK20 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110304FP KCU10 » 6.35 11.00 0.40 3.18 2.80
    TCMT110304FP KCU25 » 6.35 11.00 0.40 3.18 2.80
    TCMT16T304FP KCK20 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCMT-FP

  68. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110204LF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KC5025 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCK15 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCK15B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCK20 » 6.35 11.00 0.40 2.38 2.80
    TCMT16T304LF KC5010 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KC5025 » 9.53 16.50 0.40 3.97 4.40
    TCMT-LF

  69. TCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110204UF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT-UF

Items 1 to 250 of 409 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Cast Iron Remove This Item
  2. Radius°: 0.40 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (409)
ISO Insert Range
  1. Beyond Premium (409)
Material Machining
  1. Steel (766)
  2. Stainless Steel (426)
  3. Aluminium (37)
  4. HRSA (337)
  5. Universal (281)
Insert Type
  1. Negative (129)
  2. Positive (280)
Type of Cut
  1. Fine Finishing (4)
  2. Finishing (302)
  3. Wiper Finishing (27)
  4. Medium (46)
  5. Wiper Medium (8)
  6. Rough Positive (3)
  7. Rough (19)
Tip Style
  1. CCGT (11)
  2. CCMT (33)
  3. CCMW (2)
  4. CDHBS (4)
  5. CDHHS (8)
  6. CNGG (3)
  7. CNGP (1)
  8. CNMA (3)
  9. CNMG (21)
  10. CPGH (4)
  11. CPGT (7)
  12. CPMT (22)
  13. DCGT (4)
  14. DCMT (21)
  15. DNGG (4)
  16. DNGP (4)
  17. DNMG (30)
  18. DPGT (10)
  19. DPMT (9)
  20. SCMT (13)
  21. SCMW (1)
  22. SNGP (1)
  23. SNMG (4)
  24. SPGT (1)
  25. SPMT (4)
  26. TCGT (6)
  27. TCMT (23)
  28. TCMW (1)
  29. TDHB (4)
  30. TDHH (8)
  31. TNGG (2)
  32. TNGP (1)
  33. TNMG (16)
  34. TPCB (3)
  35. TPCG (3)
  36. TPCH (1)
  37. TPGH (6)
  38. TPGT (10)
  39. TPMT (22)
  40. VBGT (11)
  41. VBMT (14)
  42. VNGG (3)
  43. VNMG (13)
  44. WCMT (4)
  45. WNGG (2)
  46. WNMG (20)
  47. WPMT (7)
  48. WPMTS (3)
Radius°
  1. 0.05 (8)
  2. 0.10 (38)
  3. 0.20 (144)
  4. 0.34 (1)
  5. 0.74 (2)
  6. 0.80 (560)
  7. 1.14 (2)
  8. 1.20 (263)
  9. 1.60 (100)
  10. 2.40 (3)
  11. 3.20 (2)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...