ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

Achieve higher metal removal rates
(speed, feed, and depth of cut).
Gain longer tool life.

Reliability

Deliver uniform wear for predictable tool life.
Achieve reduced depth-of-cut notching.
Virtually eliminate chip flow damage.

Versatility

Products can be applied across a wide range of applications.
Can be used in low- to high-speed applications.

Complete Portfolio

The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

VNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG160401MS KC5525 »	9.53	16.61	0.10	4.76	3.81
VNMG160401MS KCU10 »	9.53	16.61	0.10	-	-
VNMG160401MS KCU25 »	9.53	16.61	0.10	4.76	3.81
VNMG160402MS K313 »	9.53	16.61	0.20	4.76	3.81
VNMG160402MS KCU10 »	9.53	16.61	0.20	-	-
VNMG160402MS KCU25 »	9.53	16.61	0.20	4.76	3.81
VNMG160404MS K313 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MS KCU10 »	9.53	16.61	0.40	-	-
VNMG160404MS KCU25 »	9.53	16.61	0.40	4.76	3.81
VNMG160408MS K313 »	9.53	16.61	0.80	4.76	3.81
VNMG160408MS KC5510 »	9.53	16.61	0.80	4.76	3.81
VNMG160408MS KCU10 »	9.53	16.61	0.80	-	-
VNMG160408MS KCU25 »	9.53	16.61	0.80	4.76	3.81
VNMG220404MS KC5525 »	12.70	22.14	0.40	4.76	5.16
VNMG220404MS KCU10 »	12.70	22.14	1.20	4.76	5.16
VNMG220404MS KCU25 »	12.70	22.14	0.40	4.76	5.16
VNMG220408MS KCU10 »	12.70	22.14	1.20	4.76	5.16
VNMG220408MS KCU25 »	12.70	22.14	0.80	4.76	5.16

VNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
VNMG160404FF KCU10 »	9.53	16.61	0.40
VNMG160408FF KCU10 »	9.53	16.61	0.80

VNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
VNMG160404FP KCU10 »	9.53	16.61	0.40
VNMG160408FP KCU10 »	9.53	16.61	0.80

VNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG160404MP KC5010 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MP KCU10 »	9.53	16.61	0.40	-	-
VNMG160408MP KC5010 »	9.53	16.61	0.80	4.76	3.81
VNMG160408MP KCU10 »	9.53	16.61	0.80	-	-
VNMG160412MP KC5010 »	9.53	16.61	1.20	4.76	3.81
VNMG160412MP KCU10 »	9.53	16.61	1.20	-	-

VNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε
VNMG160404UP KCU10 »	9.53	16.61	0.40
VNMG160408UP KCU10 »	9.53	16.61	0.80

VNMG-RP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
VNMG160408RP KC5010 »	9.53	16.61	0.80	4.76	3.81
VNMG160408RP KCU10 »	9.53	16.61	0.80	-	-
VNMG160408RP KCU25 »	9.53	16.61	0.80	4.76	3.81
VNMG160412RP KC5510 »	9.53	16.61	1.20	4.76	3.81
VNMG160412RP KCU10 »	9.53	16.61	1.20	-	-
VNMG160412RP KCU25 »	9.53	16.61	1.20	4.76	3.81

VNMP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMP160404 K313 »	9.53	16.61	0.40	4.76	3.81
VNMP160408 K68 »	9.53	16.61	0.80	4.76	3.81

VNMP-K

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMP160404K K68 »	9.53	16.61	0.40	4.76	3.81
VNMP160408K K68 »	9.53	16.61	0.80	4.76	3.81

VNMS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMS160404 K68 »	9.53	16.61	0.40	4.76	3.81
VNMS160408 K68 »	9.53	16.61	0.80	4.76	3.81

WCMT-FP

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WCMT040204FP KCU10 »	6.35	4.34	0.40	2.38	2.80
WCMT040204FP KCU25 »	6.35	4.34	0.40	2.38	2.80
WCMT06T308FP KCU10 »	9.53	6.52	0.80	3.97	4.40

WCMT-LF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WCMT040204LF KC5010 »	6.35	4.34	0.40	2.38	2.80
WCMT040204LF KC5025 »	6.35	4.34	0.40	2.38	2.80
WCMT06T308LF KC5010 »	9.53	6.52	0.80	3.97	4.40
WCMT06T308LF KC5025 »	9.53	6.52	0.80	3.97	4.40

WNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNGG080401LF KC5010 »	12.70	8.69	0.10	4.76	5.16
WNGG080401LF KCU10 »	12.70	8.69	0.10	-	-
WNGG080402LF KC5010 »	12.70	8.69	0.20	4.76	5.16
WNGG080402LF KCU10 »	12.70	8.69	0.20	-	-
WNGG080404LF KC5010 »	12.70	8.69	0.40	4.76	5.16
WNGG080404LF KCU10 »	12.70	8.69	0.40	-	-
WNGG080408LF KC5010 »	12.70	8.69	0.80	4.76	5.16
WNGG080408LF KCU10 »	12.70	8.69	0.80	-	-

WNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNGG080404FS KC5510 »	12.70	8.69	0.40	4.76	5.16

WNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG060404FF KC5010 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FF KCU10 »	9.53	6.52	0.40	-	-
WNMG060408FF KC5010 »	9.53	6.52	0.80	4.76	3.81
WNMG060408FF KCU10 »	9.53	6.52	0.80	-	-
WNMG080404FF KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FF KCU10 »	12.70	8.69	0.40	-	-
WNMG080408FF KC5010 »	12.70	8.69	0.80	4.76	5.16
WNMG080408FF KCU10 »	12.70	8.69	0.80	-	-

WNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG060404FP KC5010 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FP KCU10 »	9.53	6.52	0.40	-	-
WNMG060408FP KC5010 »	9.53	6.52	0.80	4.76	3.81
WNMG060408FP KCU10 »	9.53	6.52	0.80	-	-
WNMG080404FP KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FP KCU10 »	12.70	8.69	0.40	-	-
WNMG080408FP KC5010 »	12.70	8.69	0.80	4.76	5.16
WNMG080408FP KCU10 »	12.70	8.69	0.80	-	-
WNMG080412FP KC5010 »	12.70	8.69	1.20	4.76	5.16

WNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG060404FW KC5010 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FW KCU10 »	9.53	6.52	0.40	-	-
WNMG060408FW KC5010 »	9.53	6.52	0.80	4.76	3.81
WNMG060408FW KCU10 »	9.53	6.52	0.80	-	-
WNMG060412FW KC5010 »	9.53	6.52	1.20	4.76	3.81
WNMG080404FW KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FW KCU10 »	12.70	8.69	0.40	-	-
WNMG080408FW KC5010 »	12.70	8.69	0.80	4.76	5.16
WNMG080408FW KCU10 »	12.70	8.69	0.80	-	-
WNMG080412FW KC5010 »	12.70	8.69	1.20	4.76	5.16

WNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε
WNMG060404MP KCU10 »	9.53	6.52	0.40
WNMG060408MP KCU10 »	9.53	6.52	0.80
WNMG080408MP KCU10 »	12.70	8.69	0.80
WNMG080412MP KCU10 »	12.70	8.69	1.20

WNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
WNMG060408MS K313 »	9.53	6.52	0.80	4.76	3.81
WNMG060408MS KCU25 »	9.53	6.52	0.80	4.76	3.81
WNMG080402MS KC5525 »	12.70	8.69	0.20	4.76	5.16
WNMG080402MS KCU25 »	12.70	8.69	0.20	4.76	5.16
WNMG080404MS K313 »	12.70	8.69	0.40	4.76	5.16
WNMG080404MS KCU25 »	12.70	8.69	0.40	4.76	5.16
WNMG080408MS K313 »	12.70	8.69	0.80	4.76	5.16
WNMG080408MS KCU25 »	12.70	8.69	0.80	4.76	5.16

WNMG-RP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
WNMG060408MS KCU10 »	-	-	-	-	-
WNMG060408RP KC5010 »	9.53	6.52	0.80	4.76	3.81
WNMG060408RP KCU10 »	9.53	6.52	0.80	-	-
WNMG060408RP KCU25 »	9.53	6.52	0.80	4.76	3.81
WNMG080401MS KCU10 »	-	-	-	-	-
WNMG080402MS KCU10 »	-	-	-	-	-
WNMG080404MS KCU10 »	-	-	-	-	-
WNMG080408MS KCU10 »	-	-	-	-	-
WNMG080408RP KC5010 »	12.70	8.69	0.80	4.76	5.16
WNMG080408RP KCU10 »	12.70	8.69	0.80	-	-
WNMG080408RP KCU25 »	12.70	8.69	0.80	4.76	5.16
WNMG080412RP KCU10 »	12.70	8.69	1.20	-	-
WNMG080412RP KCU25 »	12.70	8.69	1.20	4.76	5.16
WNMG080416RP KC5525 »	12.70	8.69	1.60	4.76	5.16
WNMG080416RP KCU10 »	-	-	-	-	-
WNMG080416RP KCU25 »	12.70	8.69	1.60	4.76	5.16

WNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε
WNMG080408UP KCU10 »	12.70	8.69	0.80
WNMG080412UP KCU10 »	12.70	8.69	1.20

WPGT-UF

Positive ISO insert for Finishing machining.

Product Code
WPGT040201UF KC5010 »
WPGT040202UF KC5010 »
WPGT040202UF KCU10 »

WPGTS-UF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WPGTS30101UF KC5010 »	4.76	3.26	0.10	1.59	2.16
WPGTS30101UF KCU10 »	4.76	3.26	0.10	-	-
WPGTS30102UF KC5010 »	4.76	3.26	0.20	1.59	2.16
WPGTS30102UF KCU10 »	4.76	3.26	0.20	-	-

WPMT-FP

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WPMT040204FP KCU10 »	6.35	4.34	0.40	2.38	2.80
WPMT06T304FP KCU10 »	9.53	6.52	0.40	3.97	4.40
WPMT06T308FP KCU10 »	9.53	6.52	0.80	3.97	4.40

WPMT-LF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WPMT040204LF KC5010 »	6.35	4.34	0.40	2.38	2.90
WPMT040204LF KC5025 »	6.35	4.34	0.40	2.38	2.90
WPMT06T308LF KC5010 »	9.53	6.52	0.80	3.97	4.40
WPMT06T308LF KC5025 »	9.53	6.52	0.80	3.97	4.40

WPMTS-FP

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WPMTS3T104FP KCU10 »	4.76	3.25	0.40	1.98	2.15

WPMTS-LF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WPMTS3T104LF KC5010 »	4.76	3.25	0.40	1.98	2.15
WPMTS3T104LF KC5025 »	4.76	3.25	0.40	1.98	2.15