GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 751 to 1000 of 1617 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Set Ascending Direction

  1. SNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG090308MN KCP10B » 9.53 9.53 0.80 3.18 3.81
    SNMG090308MN KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG-MN

  2. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090308FN KCP25 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FN KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FN KCK05 » 9.53 9.53 0.80 3.18 3.81
    SNMG-FN

  3. SNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090308FF KT315 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FF KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG-FF

  4. SNMA

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMA120408 KCK20 » 12.70 12.70 0.80 4.76 5.16
    SNMA120408 KCK15B » 12.70 12.70 0.80 4.76 5.16
    SNMA120408 KCK15 » 12.70 12.70 0.80 4.76 5.16
    SNMA120408 KCK05 » 12.70 12.70 0.80 4.76 5.16
    SNMA120408 K68 » 12.70 12.70 0.80 4.76 5.16
    SNMA

  5. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP120408 KC5410 » 12.70 12.70 0.80 4.76 5.16
    SNGP

  6. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG-FS

  7. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG-LF

  8. SCMW

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMW120408 KCK20 » 12.70 12.70 0.80 4.76 5.50
    SCMW09T308 KCK20 » 9.53 9.53 0.80 3.97 4.40
    SCMW

  9. SCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMT120408MP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MP KCP25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MP KCP10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MP KCM25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MP KCM15 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MP KCK20 » 12.70 12.70 0.80 4.76 5.50
    SCMT09T308MP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MP KCP25B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MP KCP25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MP KCP10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MP KCM25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MP KCM15 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MP KCK20 » 9.53 9.53 0.80 3.97 4.40
    SCMT-MP

  10. SCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMT120408MF KCP30 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MF KCP25B » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MF KCP25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MF KCP10B » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MF KCP10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MF KCM35 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MF KCM25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MF KCM15 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MF KCK20 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MF KCK15B » 12.70 12.70 0.80 4.76 5.50
    SCMT120408MF KCK15 » 12.70 12.70 0.80 4.76 5.50
    SCMT09T308MF KCP25B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCP25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCP10B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCP10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCM35 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCM25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCM15 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCK20 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCK15B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308MF KCK15 » 9.53 9.53 0.80 3.97 4.40
    SCMT-MF

  11. SCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT120408LF KT315 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCP30 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCP25B » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCP25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCP10B » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCP10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCM35 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCM25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCM15 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCK20 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCK15B » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCK15 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCK05 » 12.70 12.70 0.80 4.76 5.50
    SCMT09T308LF KCP30 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCP25B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCP25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCP10B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCP10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCP05 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCM25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCM15 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCK20 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCK15B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCK15 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCK05 » 9.53 9.53 0.80 3.97 4.40
    SCMT-LF

  12. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT120408FP KCU25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCP25B » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCP25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCP10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCM25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCM15 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCK20 » 12.70 12.70 0.80 4.76 5.50
    SCMT09T308FP KTP10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCP25B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCP25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCP10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCM25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCM15 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCK20 » 9.53 9.53 0.80 3.97 4.40
    SCMT-FP

  13. SCMT

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT12040811 KT315 » 12.70 12.70 0.80 4.76 5.50
    SCMT09T30811 KT325 » 9.53 9.53 0.80 - -
    SCMT09T30811 KT315 » 9.53 9.53 0.80 3.97 4.40
    SCMT

  14. SCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T308UF KCP10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308UF KCP05 » 9.53 9.53 0.80 3.97 4.40
    SCMT-UF

  15. DPMT-UF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DPMT11T308UF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT-UF

  16. DPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DPMT11T308MP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MP KCP25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MP KCK20 » 9.53 11.63 0.80 3.97 4.40
    DPMT-MP

  17. DPMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DPMT11T308MF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MF KCM35 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MF KCK20 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MF KCK15 » 9.53 11.63 0.80 3.97 4.40
    DPMT-MF

  18. DPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T308LF KCP30 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP25B » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP10B » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP05 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCK20 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCK05 » 9.53 11.63 0.80 3.97 4.40
    DPMT-LF

  19. DPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T308FW KCK20 » 9.53 11.63 0.80 3.97 4.40
    DPMT070208FW KCU10 » 6.35 7.75 0.80 - -
    DPMT070208FW KCP25 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FW KCK20 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FW KC5010 » 6.35 7.75 0.80 2.38 2.80
    DPMT-FW

  20. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T308FP KTP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCP25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCK20 » 9.53 11.63 0.80 3.97 4.40
    DPMT070208FP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DPMT-FP

  21. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308LF KC5410 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5025 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5010 » 9.53 11.63 0.80 3.97 4.40
    DPGT-LF

  22. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308HP KC5410 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308HP K313 » 9.53 11.63 0.80 3.97 4.40
    DPGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DPGT070208HP KC5410 » 6.35 7.75 0.80 2.38 2.80
    DPGT-HP

  23. DNMS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMS150408 KC5410 » 12.70 15.50 0.80 4.76 5.16
    DNMS150408 K68 » 12.70 15.50 0.80 4.76 5.16
    DNMS

  24. DNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150608RP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMM-RP

  25. DNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150608RM KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RM KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RM KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RM KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMM150408RM KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMM-RM

  26. DNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG190608RN KCP30 » 15.88 19.38 0.80 6.35 6.35
    DNMG190608RN KCP25 » 15.88 19.38 0.80 6.35 6.35
    DNMG190608RN KCP10B » 15.88 19.38 0.80 6.35 6.35
    DNMG190608RN KCP10 » 15.88 19.38 0.80 6.35 6.35
    DNMG150608RN KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150408RN KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG-RN

  27. DNMG-RM

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG190608RM KCP25 » 15.88 19.38 0.80 6.35 6.35
    DNMG-RM

  28. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608UP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150408UP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG-UP

  29. DNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150608UN KCK20 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UN KCK15B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UN KCK15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UN KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150408UN KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UN KCK15B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UN KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UN KCK05 » 12.70 15.50 0.80 - -
    DNMG-UN

  30. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608RP KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCK20 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCK15B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCK15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150408RP KCP40 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMG-RP

  31. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MS K313 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MS

  32. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MP

  33. DNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150608MN KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MN

  34. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150608FN KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FN

  35. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150608FF KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150608FF KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FF

Items 751 to 1000 of 1617 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Manufacturer: Kennametal Remove This Item
  2. Radius°: 0.80 Remove This Item
Clear All

Shopping Options

ISO Insert Range
  1. Beyond Premium (1617)
Material Machining
  1. Steel (1022)
  2. Stainless Steel (521)
  3. Cast Iron (560)
  4. Aluminium (40)
  5. HRSA (336)
  6. Universal (287)
Insert Type
  1. Negative (850)
  2. Positive (767)
Type of Cut
  1. Fine Finishing (9)
  2. Finishing (759)
  3. Wiper Finishing (52)
  4. Medium (417)
  5. Wiper Medium (34)
  6. Medium Roughing (2)
  7. Rough Positive (24)
  8. Rough (280)
  9. Rough Single Sided (40)
Tip Style
  1. CCGT (13)
  2. CCMT (123)
  3. CCMW (2)
  4. CNGG (7)
  5. CNGP (4)
  6. CNMA (7)
  7. CNMG (156)
  8. CNMM (15)
  9. CPGH (7)
  10. CPGT (10)
  11. CPMT (85)
  12. DCGT (8)
  13. DCMT (72)
  14. DNGG (5)
  15. DNGP (8)
  16. DNMA (8)
  17. DNMG (176)
  18. DNMM (8)
  19. DNMS (2)
  20. DPGT (11)
  21. DPMT (35)
  22. SCMT (81)
  23. SCMW (2)
  24. SNGG (5)
  25. SNGP (2)
  26. SNMA (4)
  27. SNMG (71)
  28. SNMM (5)
  29. SNMS (2)
  30. SPGT (2)
  31. SPMT (39)
  32. TCGT (8)
  33. TCMT (97)
  34. TCMW (1)
  35. TDHB (3)
  36. TNGG (5)
  37. TNGP (2)
  38. TNMA (8)
  39. TNMG (123)
  40. TNMM (12)
  41. TNMP (5)
  42. TNMS (3)
  43. TPCB (3)
  44. TPCG (1)
  45. TPGH (4)
  46. TPGT (12)
  47. TPMT (77)
  48. VBGT (5)
  49. VBMT (48)
  50. VNGG (8)
  51. VNGP (2)
  52. VNMG (54)
  53. VNMP (4)
  54. VNMS (5)
  55. WCMT (5)
  56. WNGG (2)
  57. WNMA (8)
  58. WNMG (117)
  59. WPMT (13)
Radius°
  1. 0.05 (12)
  2. 0.10 (64)
  3. 0.20 (261)
  4. 0.34 (2)
  5. 0.40 (1131)
  6. 0.74 (6)
  7. 1.14 (7)
  8. 1.20 (899)
  9. 1.60 (360)
  10. 2.40 (87)
  11. 3.20 (6)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...