GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 287 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction

  1. WPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMT06T308LF KC5025 » 9.53 6.52 0.80 3.97 4.40
    WPMT06T308LF KC5010 » 9.53 6.52 0.80 3.97 4.40
    WPMT-LF

  2. WPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMT06T308FP KCU10 » 9.53 6.52 0.80 3.97 4.40
    WPMT-FP

  3. WNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε  
    WNMG080408UP KCU10 » 12.70 8.69 0.80
    WNMG-UP

  4. WNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080408RP KCU25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408RP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG060408RP KCU25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408RP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG-RP

  5. WNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080408MS KCU25 » 12.70 8.69 0.80 4.76 5.16
    WNMG060408MS KCU25 » 9.53 6.52 0.80 4.76 3.81
    WNMG-MS

  6. WNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    WNMG080408MP KCU10 » 12.70 8.69 0.80
    WNMG060408MP KCU10 » 9.53 6.52 0.80
    WNMG-MP

  7. WNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080408FW KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FW KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG060408FW KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FW KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG-FW

  8. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080408FP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG060408FP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG-FP

  9. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080408FF KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG060408FF KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FF KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG-FF

  10. WNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080408LF KCU10 » 12.70 8.69 0.80 - -
    WNGG080408LF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNGG-LF

  11. WCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WCMT06T308LF KC5025 » 9.53 6.52 0.80 3.97 4.40
    WCMT06T308LF KC5010 » 9.53 6.52 0.80 3.97 4.40
    WCMT-LF

  12. WCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WCMT06T308FP KCU10 » 9.53 6.52 0.80 3.97 4.40
    WCMT-FP

  13. VNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG220408MS KCU25 » 12.70 22.14 0.80 4.76 5.16
    VNMG160408MS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MS KCU10 » 9.53 16.61 0.80 - -
    VNMG-MS

  14. VNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε  
    VNMG160408UP KCU10 » 9.53 16.61 0.80
    VNMG-UP

  15. VNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160408RP KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408RP KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNMG-RP

  16. VNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160408MP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408MP KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNMG-MP

  17. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNMG160408FP KCU10 » 9.53 16.61 0.80
    VNMG-FP

  18. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNMG160408FF KCU10 » 9.53 16.61 0.80
    VNMG-FF

  19. VNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNGP220408 KCU10 » 12.70 22.14 0.80
    VNGP

  20. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG220408LF KCU10 » 12.70 22.14 0.80 - -
    VNGG220408LF KC5010 » 12.70 22.14 0.80 4.76 5.16
    VNGG160408LF KCU10 » 9.53 16.61 0.80 - -
    VNGG160408LF KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNGG-LF

  21. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160408FS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNGG-FS

  22. VBMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBMT160408LF KC5025 » 9.53 16.61 0.80 4.76 4.40
    VBMT110308LF KC5025 » 6.35 11.07 0.80 3.18 2.80
    VBMT-LF

  23. VBMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBMT160408FP KCU25 » 9.53 16.61 0.80 4.76 4.40
    VBMT160408FP KCU10 » 9.53 16.61 0.80 4.76 4.40
    VBMT110308FP KCU25 » 6.35 11.07 0.80 3.18 2.80
    VBMT110308FP KCU10 » 6.35 11.07 0.80 3.18 2.80
    VBMT-FP

  24. VBGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBGT160408HP KCU25 » 9.53 16.61 0.80 4.76 4.40
    VBGT160408HP KCU10 » 9.53 16.61 0.80 - -
    VBGT160408HP KC5025 » 9.53 16.61 0.80 4.76 4.40
    VBGT-HP

  25. TPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPMT220408LF KC5025 » 12.70 22.00 0.80 4.76 5.50
    TPMT16T308LF KC5025 » 9.53 16.50 0.80 3.97 4.40
    TPMT-LF

  26. TPMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPMT16T308UF KC5010 » 9.53 16.50 0.80 3.97 4.40
    TPMT-UF

  27. TPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPMT16T308FP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TPMT16T308FP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TPMT110308FP KCU10 » 6.35 11.00 0.80 3.18 2.80
    TPMT110208FP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TPMT090208FP KCU25 » 5.56 9.63 0.80 2.38 2.50
    TPMT090208FP KCU10 » 5.56 9.63 0.80 2.38 2.50
    TPMT-FP

  28. TPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TPMT110208MP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TPMT-MP

  29. TPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGT16T308LF KCU10 » 9.53 16.50 0.80 - -
    TPGT16T308LF KC5025 » 9.53 16.50 0.80 3.97 4.40
    TPGT110208LF KCU10 » 6.35 11.00 0.80 - -
    TPGT110208LF KC5025 » 6.35 11.00 0.80 2.38 2.80
    TPGT-LF

  30. TPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGT16T308HP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TPGT16T308HP KCU10 » 9.53 16.50 0.80 - -
    TPGT110208HP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TPGT110208HP KCU10 » 6.35 11.00 0.80 - -
    TPGT-HP

  31. TPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGH160308 KCU25 » 9.53 16.50 0.80 3.18 3.33
    TPGH160308 KCU10 » 9.53 16.50 0.80 - -
    TPGH160308 KC5025 » 9.53 16.50 0.80 3.18 3.33
    TPGH160308 KC5010 » 9.53 16.50 0.80 3.18 3.33
    TPGH

  32. TPCG-L

    Positive ISO insert for Finishing machining.

    Product Code D Rε S D1  
    TPCG110208L KC5010 » 6.35 0.79 2.44 3.30
    TPCG-L

  33. TPCB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPCB160308 KCU25 » 9.53 16.50 0.79 3.23 3.30
    TPCB160308 KC5025 » 9.53 16.50 0.79 3.23 3.30
    TPCB160308 KC5010 » 9.53 16.50 0.79 3.23 3.30
    TPCB

  34. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG270608MS KCU25 » 15.88 27.50 0.80 6.35 6.35
    TNMG220408MS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MS KCU10 » 12.70 22.00 0.80 - -
    TNMG160408MS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MS KCU10 » 9.53 16.50 0.80 - -
    TNMG-MS

  35. TNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG220408RP KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCU10 » 12.70 22.00 0.80 - -
    TNMG160408RP KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCU10 » 9.53 16.50 0.80 - -
    TNMG-RP

  36. TNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    TNMG220408MP KCU10 » 12.70 22.00 0.80
    TNMG160408MP KCU10 » 9.53 16.50 0.80
    TNMG-MP

  37. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220408FP KC5010 » 12.70 22.00 0.80 4.76 5.16
    TNMG160408FP KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG-FP

  38. TNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FW KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FW KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG-FW

  39. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FF KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FF KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG110308FF KC5010 » 6.35 11.00 0.80 3.18 2.26
    TNMG-FF

  40. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    TNGP160408 KCU10 » 9.53 16.50 0.80
    TNGP

  41. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG220408FS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNGG220408FS KCU10 » 12.70 22.00 0.80 - -
    TNGG160408FS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNGG-FS

  42. TDHB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHB07T1208 KCU10 » 4.06 7.04 0.79 - -
    TDHB07T1208 KC5025 » 4.06 7.04 0.79 1.19 2.39
    TDHB07T1208 KC5010 » 4.06 7.04 0.79 1.19 2.39
    TDHB

  43. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT220408LF KC5025 » 12.70 22.00 0.80 4.76 5.50
    TCMT220408LF KC5010 » 12.70 22.00 0.80 4.76 5.50
    TCMT16T308LF KC5025 » 9.53 16.50 0.80 3.97 4.40
    TCMT16T308LF KC5010 » 9.53 16.50 0.80 3.97 4.40
    TCMT110208LF KC5025 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KC5010 » 6.35 11.00 0.80 2.38 2.80
    TCMT-LF

  44. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT220408FP KCU25 » 12.70 22.00 0.80 4.76 5.50
    TCMT220408FP KCU10 » 12.70 22.00 0.80 4.76 5.50
    TCMT16T308FP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TCMT16T308FP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCMT110308FP KCU25 » 6.35 11.00 0.80 3.18 2.80
    TCMT110308FP KCU10 » 6.35 11.00 0.80 3.18 2.80
    TCMT110208FP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCMT090208FP KCU25 » 5.56 9.63 0.80 2.38 2.50
    TCMT090208FP KCU10 » 5.56 9.63 0.80 2.38 2.50
    TCMT-FP

  45. TCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T308UF KC5010 » 9.53 16.50 0.80 3.97 4.40
    TCMT110208UF KC5010 » 6.35 11.00 0.80 2.38 2.80
    TCMT-UF

  46. TCMT-MP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T308MP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCMT110208MP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCMT-MP

  47. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T308LF KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT-LF

  48. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T308HP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T308HP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT110208HP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCGT110208HP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCGT-HP

  49. SPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SPMT120408MP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SPMT09T308MP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SPMT-MP

  50. SPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SPMT-FP

  51. SPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SPGT09T308LF KCU10 » 9.53 9.53 0.80
    SPGT-LF

  52. SNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG150608MS KCU25 » 15.88 15.88 0.80 6.35 6.35
    SNMG120408MS KCU25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MS KCU10 » 12.70 12.70 0.80 - -
    SNMG-MS

  53. SNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    SNMG120408MP KCU10 » 12.70 12.70 0.80
    SNMG-MP

  54. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SNMG120408FP KCU10 » 12.70 12.70 0.80
    SNMG-FP

  55. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP

  56. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG-FS

  57. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG-LF

  58. SCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMT120408MP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SCMT09T308MP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT-MP

  59. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT120408FP KCU25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SCMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT-FP

  60. DPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DPMT11T308MP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT-MP

  61. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT070208FP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DPMT-FP

  62. DPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070208FW KCU10 » 6.35 7.75 0.80 - -
    DPMT070208FW KC5010 » 6.35 7.75 0.80 2.38 2.80
    DPMT-FW

  63. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308LF KC5025 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5010 » 9.53 11.63 0.80 3.97 4.40
    DPGT-LF

  64. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DPGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DPGT-HP

  65. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-UP

  66. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG-RP

  67. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150408MS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MS KCU10 » 12.70 15.50 0.80 - -
    DNMG110408MS KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MS KCU10 » 9.53 11.63 0.80 - -
    DNMG-MS

  68. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150408MP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG110408MP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-MP

  69. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG150608FF KCU10 » 12.70 15.50 0.80
    DNMG150408FF KCU10 » 12.70 15.50 0.80
    DNMG110408FF KCU10 » 9.53 11.63 0.80
    DNMG-FF

  70. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-CT

  71. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FW KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-FW

  72. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP

  73. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG-LF

  74. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG-FS

  75. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150408FP KCU10 » 12.70 15.50 0.80 4.76 5.50
    DCMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DCMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DCMT-FP

  76. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    DCMT11T308MW KCU10 » 9.53 11.63 0.80
    DCMT-MW

  77. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DCMT11T308LF KCU10 » 9.53 11.63 0.80
    DCMT-LF

  78. DCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    DCMT11T308FW KCU10 » 9.53 11.63 0.80
    DCMT-FW

  79. DCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DCGT150408LF KCU10 » 12.70 15.50 0.80
    DCGT-LF

  80. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DCGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DCGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DCGT-HP

  81. CPMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CPMT09T308MW KCU10 » 9.53 9.67 0.80
    CPMT-MW

  82. CPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CPMT09T308MP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT060208MP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CPMT-MP

  83. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    CPMT09T308FW KCU10 » 9.53 9.67 0.80
    CPMT060208FW KCU10 » 6.35 6.45 0.80
    CPMT-FW

  84. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T308FP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT060208FP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CPMT060208FP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CPMT-FP

  85. CPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CPGT09T308LF KCU10 » 9.53 9.67 0.80
    CPGT060208LF KCU10 » 6.35 6.45 0.80
    CPGT-LF

  86. CPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGT09T308HP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPGT09T308HP KCU10 » 9.53 9.67 0.80 - -
    CPGT060208HP KCU25 » 6.35 6.45 0.80 2.38 2.80
    CPGT060208HP KCU10 » 6.35 6.45 0.80 - -
    CPGT-HP

  87. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGH09T308 KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPGH09T308 KCU10 » 9.53 9.67 0.80 - -
    CPGH09T308 KC5025 » 9.53 9.67 0.80 3.97 4.40
    CPGH09T308 KC5010 » 9.53 9.67 0.80 3.97 4.40
    CPGH

  88. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG190608MS KCU25 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MS KCU10 » 19.05 19.34 0.80 - -
    CNMG160608MS KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MS KCU10 » 15.88 16.12 0.80 - -
    CNMG120408MS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MS KCU10 » 12.70 12.90 0.80 - -
    CNMG-MS

  89. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG190608MP KCU10 » 19.05 19.34 0.80 - -
    CNMG190608MP KC5010 » 19.05 19.34 0.80 6.35 7.93
    CNMG160608MP KCU10 » 15.88 16.12 0.80 - -
    CNMG160608MP KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNMG-MP

  90. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG160608RP KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RP KCU10 » 15.88 16.12 0.80 - -
    CNMG120408RP KCU25 » 12.70 12.90 0.80 - -
    CNMG120408RP KCU10 » 12.70 12.90 0.80 - -
    CNMG-RP

Items 1 to 250 of 287 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Manufacturer: Kennametal Remove This Item
  2. Material Machining: Universal Remove This Item
  3. Radius°: 0.80 Remove This Item
Clear All

Shopping Options

ISO Insert Range
  1. Beyond Premium (287)
Material Machining
  1. Steel (1022)
  2. Stainless Steel (521)
  3. Cast Iron (560)
  4. Aluminium (40)
  5. HRSA (336)
Insert Type
  1. Negative (145)
  2. Positive (142)
Type of Cut
  1. Fine Finishing (4)
  2. Finishing (180)
  3. Wiper Finishing (13)
  4. Medium (57)
  5. Wiper Medium (4)
  6. Rough Positive (4)
  7. Rough (25)
Tip Style
  1. CCGT (7)
  2. CCMT (10)
  3. CNGG (5)
  4. CNGP (1)
  5. CNMG (28)
  6. CPGH (4)
  7. CPGT (6)
  8. CPMT (9)
  9. DCGT (5)
  10. DCMT (7)
  11. DNGG (3)
  12. DNGP (4)
  13. DNMG (29)
  14. DPGT (7)
  15. DPMT (7)
  16. SCMT (6)
  17. SNGG (5)
  18. SNGP (1)
  19. SNMG (5)
  20. SPGT (1)
  21. SPMT (4)
  22. TCGT (5)
  23. TCMT (20)
  24. TDHB (3)
  25. TNGG (3)
  26. TNGP (1)
  27. TNMG (18)
  28. TPCB (3)
  29. TPCG (1)
  30. TPGH (4)
  31. TPGT (8)
  32. TPMT (10)
  33. VBGT (3)
  34. VBMT (6)
  35. VNGG (5)
  36. VNGP (1)
  37. VNMG (11)
  38. WCMT (3)
  39. WNGG (2)
  40. WNMG (23)
  41. WPMT (3)
Radius°
  1. 0.05 (8)
  2. 0.10 (38)
  3. 0.20 (144)
  4. 0.34 (1)
  5. 0.40 (281)
  6. 0.74 (2)
  7. 1.14 (2)
  8. 1.20 (88)
  9. 1.60 (20)
  10. 2.40 (2)
  11. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...