GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 251 to 426 of 426 total

per page
Page:
  2. 1
  3. 2

Set Ascending Direction

  1. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150604MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MP KCM35 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCM25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCM15 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150404MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150404MP KCM35 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCM25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCM15 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG-MP

  2. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150604FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FW KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150408FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150408FW KC5010 » 12.70 15.50 0.41 4.76 5.16
    DNMG150404FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FW KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110404FW KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FW KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG-FW

  3. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG150604FF KCU10 » 12.70 15.50 0.40
    DNMG150404FF KCU10 » 12.70 15.50 0.40
    DNMG110404FF KCU10 » 9.53 11.63 0.40
    DNMG-FF

  4. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150404UP KCU10 » 12.70 15.50 0.40 - -
    DNMG150404UP KCM25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCM15 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG-UP

  5. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150404MS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MS KCU10 » 12.70 15.50 0.40 - -
    DNMG-MS

  6. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG-CT

  7. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP

  8. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG-FS

  9. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG-LF

  10. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150404FP KCU10 » 12.70 15.50 0.40 4.76 5.50
    DCMT150404FP KCM25 » 12.70 15.50 0.40 4.76 5.50
    DCMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCM25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCM15 » 9.53 11.63 0.40 3.97 4.40
    DCMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCM25 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCM15 » 6.35 7.75 0.40 2.38 2.80
    DCMT-FP

  11. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    DCMT11T304MW KCU10 » 9.53 11.63 0.40
    DCMT-MW

  12. DCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T304MF KCM25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304MF KCM15 » 9.53 11.63 0.40 3.97 4.40
    DCMT-MF

  13. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T304LF KCM35 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCM25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCM15 » 9.53 11.63 0.40 3.97 4.40
    DCMT070204LF KCM35 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204LF KCM25 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204LF KCM15 » 6.35 7.75 0.40 2.38 2.80
    DCMT-LF

  14. DCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    DCMT11T304FW KCU10 » 9.53 11.63 0.40
    DCMT-FW

  15. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DCGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DCGT-HP

  16. CPMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CPMT09T304MW KCU10 » 9.53 9.67 0.40
    CPMT-MW

  17. CPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T304LF KCM25 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304LF KCM15 » 9.53 9.67 0.40 3.97 4.40
    CPMT060204LF KCM25 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204LF KCM15 » 6.35 6.45 0.40 2.38 2.80
    CPMT-LF

  18. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    CPMT09T304FW KCU10 » 9.53 9.67 0.40
    CPMT060204FW KCU10 » 6.35 6.45 0.40
    CPMT-FW

  19. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCM25 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCM15 » 9.53 9.67 0.40 3.97 4.40
    CPMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCM25 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCM15 » 6.35 6.45 0.40 2.38 2.80
    CPMT050204FP KCU25 » 5.56 5.65 0.40 2.38 2.50
    CPMT050204FP KCU10 » 5.56 5.65 0.40 2.38 2.50
    CPMT-FP

  20. CPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CPGT09T304LF KCU10 » 9.53 9.67 0.40
    CPGT060204LF KCU10 » 6.35 6.45 0.40
    CPGT-LF

  21. CPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGT09T304HP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGT09T304HP KCU10 » 9.53 9.67 0.40 - -
    CPGT060204HP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CPGT060204HP KCU10 » 6.35 6.45 0.40 - -
    CPGT060204HP KC5025 » 6.35 6.45 0.40 2.38 2.80
    CPGT-HP

  22. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGH09T304 KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KCU10 » 9.53 9.67 0.40 - -
    CPGH09T304 KC5025 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KC5010 » 9.53 9.67 0.40 3.97 4.40
    CPGH

  23. CNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120404UP KCM25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UP KCM15 » 12.70 12.90 0.40 4.76 5.16
    CNMG-UP

  24. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120404RP KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404RP KCM25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCM15 » 12.70 12.90 0.40 4.76 5.16
    CNMG-RP

  25. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MS KCU10 » 12.70 12.90 0.40 - -
    CNMG-MS

  26. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404MP KCM35 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCM25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KCM15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG-MP

  27. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FW KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FW KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FW

  28. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FP KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FP KCM15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FP

  29. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FF KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG090304FF KCU10 » 9.53 9.67 0.40 - -
    CNMG090304FF KC5010 » 9.53 9.67 0.40 3.18 3.81
    CNMG-FF

  30. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CNGP120404 KCU10 » 12.70 12.90 0.40
    CNGP

  31. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404LF KCU10 » 12.70 12.90 0.40 - -
    CNGG120404LF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNGG-LF

  32. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404FS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNGG-FS

  33. CDHHS-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHHS4T004R KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004R KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-R

  34. CDHHS-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHHS4T004L KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004L KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-L

  35. CDHBS

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHBS4T004 KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KCU10 » 3.97 4.03 0.38 - -
    CDHBS4T004 KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHBS

  36. CCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    CCMT120404MW KCU10 » 12.70 12.90 0.40
    CCMT09T304MW KCU10 » 9.53 9.67 0.40
    CCMT-MW

  37. CCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT120404LF KCM25 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404LF KCM15 » 12.70 12.90 0.40 4.76 5.50
    CCMT09T304LF KCM35 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304LF KCM25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304LF KCM15 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204LF KCM35 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCM25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCM15 » 6.35 6.45 0.40 2.38 2.80
    CCMT-LF

  38. CCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT120404FP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCU10 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCM25 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCM15 » 12.70 12.90 0.40 4.76 5.50
    CCMT09T304FP KU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCM25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCM15 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204FP KU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCM25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCM15 » 6.35 6.45 0.40 2.38 2.80
    CCMT-FP

  39. CCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT09T304MP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MP KCM25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MP KCM15 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204MP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MP KCM25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MP KCM15 » 6.35 6.45 0.40 2.38 2.80
    CCMT-MP

  40. CCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT09T304MF KCM35 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MF KCM25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MF KCM15 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204MF KCM35 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MF KCM25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MF KCM15 » 6.35 6.45 0.40 2.38 2.80
    CCMT-MF

  41. CCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT120404HP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCGT120404HP KCU10 » 12.70 12.90 0.40 - -
    CCGT09T304HP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCGT09T304HP KCU10 » 9.53 9.67 0.40 - -
    CCGT060204HP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCGT060204HP KCU10 » 6.35 6.45 0.40 - -
    CCGT-HP

  42. CCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCGT09T3X0LF KC5025 » 9.53 9.67 0.04 3.97 4.40
    CCGT09T304LF KCU10 » 9.53 9.67 0.40 - -
    CCGT0602X0LF KC5025 » 6.35 6.45 0.04 2.38 2.80
    CCGT060204LF KCU10 » 6.35 6.45 0.40 - -
    CCGT060204LF KC5025 » 6.35 6.45 0.40 2.38 2.80
    CCGT-LF

Items 251 to 426 of 426 total

per page
Page:
  2. 1
  3. 2

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Manufacturer: Kennametal Remove This Item
  2. Material Machining: Stainless Steel Remove This Item
  3. Radius°: 0.40 Remove This Item
Clear All

Shopping Options

ISO Insert Range
  1. Beyond Premium (426)
Material Machining
  1. Steel (766)
  2. Cast Iron (409)
  3. Aluminium (37)
  4. HRSA (337)
  5. Universal (281)
Insert Type
  1. Negative (141)
  2. Positive (285)
Type of Cut
  1. Fine Finishing (4)
  2. Finishing (315)
  3. Wiper Finishing (22)
  4. Medium (62)
  5. Wiper Medium (5)
  6. Rough Positive (4)
  7. Rough (14)
Tip Style
  1. CCGT (11)
  2. CCMT (36)
  3. CDHBS (4)
  4. CDHHS (8)
  5. CNGG (3)
  6. CNGP (1)
  7. CNMG (23)
  8. CPGH (4)
  9. CPGT (7)
  10. CPMT (17)
  11. DCGT (4)
  12. DCMT (20)
  13. DNGG (4)
  14. DNGP (4)
  15. DNMG (38)
  16. DPGT (10)
  17. DPMT (13)
  18. SCMT (17)
  19. SNGP (1)
  20. SNMG (3)
  21. SPGT (1)
  22. SPMT (3)
  23. TCGT (6)
  24. TCMT (26)
  25. TDHB (4)
  26. TDHH (8)
  27. TNGG (2)
  28. TNGP (1)
  29. TNMG (22)
  30. TPCB (3)
  31. TPCG (3)
  32. TPCH (1)
  33. TPGH (6)
  34. TPGT (10)
  35. TPMT (20)
  36. VBGT (11)
  37. VBMT (16)
  38. VNGG (3)
  39. VNMG (14)
  40. WCMT (4)
  41. WNGG (2)
  42. WNMG (20)
  43. WPMT (9)
  44. WPMTS (3)
Radius°
  1. 0.05 (8)
  2. 0.10 (38)
  3. 0.20 (153)
  4. 0.34 (1)
  5. 0.74 (2)
  6. 0.80 (521)
  7. 1.14 (2)
  8. 1.20 (235)
  9. 1.60 (62)
  10. 2.40 (7)
  11. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...