GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1001 to 1250 of 3005 total

per page
Page:
  2. 3
  3. 4
  4. 5
  5. 6
  6. 7

Set Ascending Direction

  1. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110204FP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP05 » 6.35 11.00 0.40 2.38 2.80
    TCMT110202FP KTP10 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202FP KCU25 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202FP KCU10 » 6.35 11.00 0.20 2.38 2.90
    TCMT090208FP KCU25 » 5.56 9.63 0.80 2.38 2.50
    TCMT090208FP KCU10 » 5.56 9.63 0.80 2.38 2.50
    TCMT090204FP KCU25 » 5.56 9.63 0.40 2.38 2.50
    TCMT090204FP KCU10 » 5.56 9.63 0.40 2.38 2.50
    TCMT-FP

  2. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110202LF KC5025 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202LF KC5010 » 6.35 11.00 0.20 2.38 2.90
    TCMT-LF

  3. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T308LF KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T304LF KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T302LF KCU10 » 9.53 16.50 0.20 3.97 4.40
    TCGT110204LF KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT110201LF KCU10 » 6.35 11.00 0.10 2.38 2.80
    TCGT-LF

  4. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T308HP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T308HP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T304HP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T302HP KCU25 » 9.53 16.50 0.20 3.97 4.40
    TCGT16T302HP KCU10 » 9.53 16.50 0.20 3.97 4.40
    TCGT110208HP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCGT110208HP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCGT110204HP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT110202HP KCU25 » 6.35 11.00 0.20 2.38 2.80
    TCGT110202HP KCU10 » 6.35 11.00 0.20 2.38 2.80
    TCGT-HP

  5. TCGT

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT06T10411 KT325 » 6.35 11.00 0.10 2.38 2.80
    TCGT06T10211 KT325 » 6.35 11.00 0.10 2.38 2.80
    TCGT

  6. SPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SPMT120408MP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MP KCP25 » 12.70 12.70 0.80 4.76 5.50
    SPMT09T308MP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MP KCP25 » 9.53 9.53 0.80 3.97 4.40
    SPMT-MP

  7. SPMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SPMT120408MF KCP30 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MF KCP25 » 12.70 12.70 0.80 4.76 5.50
    SPMT120408MF KCP10 » 12.70 12.70 0.80 4.76 5.50
    SPMT09T308MF KCP25B » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MF KCP25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308MF KCP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT-MF

  8. SPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T308LF KT315 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP25B » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP10B » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T304LF KT315 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304LF KCP25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304LF KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT-LF

  9. SPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T308FP KTP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCP25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCP05 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCP25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT-FP

  10. SPMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T304UF KCP10B » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304UF KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT-UF

  11. SPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SPGT09T308LF KCU10 » 9.53 9.53 0.80
    SPGT09T304LF KCU10 » 9.53 9.53 0.40
    SPGT-LF

  12. SNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM250924RP KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250724RP KCP40 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RP KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM190624RP KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RP KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190616RP KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190612RP KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RP KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM150616RP KCP10 » 15.88 15.88 1.60 6.35 6.35
    SNMM150612RP KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RP KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMM120412RP KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMM120412RP KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120408RP KCP40 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RP KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMM-RP

  13. SNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM250924RM KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP30 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP25B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP10 » 25.40 25.40 2.40 9.53 9.12
    SNMM250724RM KCP30 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RM KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RM KCP10 » 25.40 25.40 2.40 7.94 9.12
    SNMM190624RM KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RM KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RM KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190616RM KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMM190612RM KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMM150616RM KCP30 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP25B » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP25 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP10 » 15.88 15.88 1.60 6.35 6.35
    SNMM150612RM KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RM KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMM120416RM KCP30 » 12.70 12.70 1.60 4.76 5.16
    SNMM120416RM KCP25 » 12.70 12.70 1.60 4.76 5.16
    SNMM120412RM KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120408RM KCP30 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RM KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMM-RM

  14. SNMM-RH

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM250924RH KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP30 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP25B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP10B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP10 » 25.40 25.40 2.40 9.53 9.12
    SNMM250732RH KCP30 » 25.40 25.40 3.20 7.94 9.12
    SNMM250724RH KCP40 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP30 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP25B » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP10B » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP10 » 25.40 25.40 2.40 7.94 9.12
    SNMM190624RH KCP40 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP10 » 19.05 19.05 2.40 6.35 7.93
    SNMM190616RH KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMM190612RH KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMM-RH

  15. SNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG250924RN KCP30 » 25.40 25.40 2.40 9.55 9.12
    SNMG190624RN KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMG190624RN KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMG190624RN KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMG190616RN KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RN KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RN KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RN KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMG190612RN KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RN KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RN KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RN KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RN KCP10B » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RN KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMG190608RN KCP30 » 19.05 19.05 0.80 6.35 7.93
    SNMG190608RN KCP25B » 19.05 19.05 0.80 6.35 7.93
    SNMG190608RN KCP25 » 19.05 19.05 0.80 6.35 7.93
    SNMG150616RN KCP40 » 15.88 15.88 1.60 6.35 6.35
    SNMG150616RN KCP30 » 15.88 15.88 1.60 6.35 6.35
    SNMG150616RN KCP25B » 15.88 15.88 1.60 6.35 6.35
    SNMG150616RN KCP25 » 15.88 15.88 1.60 6.35 6.35
    SNMG150616RN KCP10 » 15.88 15.88 1.60 6.35 6.35
    SNMG150612RN KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RN KCP30 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RN KCP25B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RN KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RN KCP10B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RN KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMG150608RN KCP10 » 15.88 15.88 0.80 6.35 6.35
    SNMG120416RN KCP40 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416RN KCP30 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416RN KCP25B » 12.70 12.70 1.60 4.76 5.16
    SNMG120416RN KCP25 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416RN KCP10B » 12.70 12.70 1.60 4.76 5.16
    SNMG120416RN KCP10 » 12.70 12.70 1.60 4.76 5.16
    SNMG120412RN KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP30 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG-RN

  16. SNMG-RM

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG250924RM KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMG250924RM KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMG190616RM KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RM KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RM KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMG190612RM KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RM KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMG-RM

  17. SNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG190616RP KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMG190612RP KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RP KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RP KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RP KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RP KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMG150616RP KCP30 » 15.88 15.88 1.60 6.35 6.35
    SNMG150616RP KCP25 » 15.88 15.88 1.60 6.35 6.35
    SNMG150616RP KCP10B » 15.88 15.88 1.60 6.35 6.35
    SNMG150616RP KCP10 » 15.88 15.88 1.60 6.35 6.35
    SNMG150612RP KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCP30 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCP25B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCP10B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMG120416RP KCP10 » 12.70 12.70 1.60 4.76 5.16
    SNMG120412RP KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP30 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP05 » 12.70 12.70 1.20 4.76 5.16
    SNMG-RP

  18. SNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    SNMG190616MP KCU10 » 19.05 19.05 1.60
    SNMG190612MP KCU10 » 19.05 19.05 1.20
    SNMG150612MP KCU10 » 15.88 15.88 1.20
    SNMG120412MP KCU10 » 12.70 12.70 1.20
    SNMG-MP

  19. SNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG190616MN KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMG190612MN KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612MN KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMG190612MN KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612MN KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMG150616MN KCP25B » 15.88 15.88 1.60 6.35 6.35
    SNMG150616MN KCP25 » 15.88 15.88 1.60 6.35 6.35
    SNMG150612MN KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612MN KCP25B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612MN KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612MN KCP10B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612MN KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMG120416MN KCP25B » 12.70 12.70 1.60 4.76 5.16
    SNMG120416MN KCP25 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416MN KCP10 » 12.70 12.70 1.60 4.76 5.16
    SNMG120412MN KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP30 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG-MN

  20. SNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG190612MS KCU25 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612MS KCU10 » 19.05 19.05 1.20 - -
    SNMG150612MS KCU25 » 15.88 15.88 1.20 6.35 6.35
    SNMG150608MS KCU25 » 15.88 15.88 0.80 6.35 6.35
    SNMG120412MS KCU25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MS KCU10 » 12.70 12.70 1.20 - -
    SNMG-MS

  21. SNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG150612UP KCU10 » 15.88 15.88 1.20 - -
    SNMG150612UP KC5010 » 15.88 15.88 1.20 6.35 6.35
    SNMG-UP

  22. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120416FN KCP10 » 12.70 12.70 1.60 4.76 5.16
    SNMG-FN

  23. SNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120412MW KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MW KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MW KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG-MW

Items 1001 to 1250 of 3005 total

per page
Page:
  2. 3
  3. 4
  4. 5
  5. 6
  6. 7

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Manufacturer: Kennametal Remove This Item
  2. Material Machining: Steel Remove This Item
Clear All

Shopping Options

ISO Insert Range
  1. Beyond Premium (3005)
Material Machining
  1. Stainless Steel (1512)
  2. Cast Iron (1598)
  3. Aluminium (127)
  4. HRSA (1132)
  5. Universal (920)
Insert Type
  1. Negative (1733)
  2. Positive (1272)
Type of Cut
  1. Fine Finishing (19)
  2. Finishing (1427)
  3. Wiper Finishing (134)
  4. Medium (575)
  5. Wiper Medium (75)
  6. Rough Positive (63)
  7. Rough (470)
  8. Rough Single Sided (242)
Tip Style
  1. CCGT (34)
  2. CCMT (174)
  3. CDG (6)
  4. CDHBS (15)
  5. CDHHS (18)
  6. CDT (2)
  7. CNGG (17)
  8. CNGP (4)
  9. CNMG (337)
  10. CNMM (113)
  11. CPG (2)
  12. CPGH (21)
  13. CPGT (20)
  14. CPMT (117)
  15. DCGT (15)
  16. DCMT (136)
  17. DNGG (11)
  18. DNGP (12)
  19. DNMG (359)
  20. DNMM (24)
  21. DPGT (32)
  22. DPMT (56)
  23. RCGH (1)
  24. RCGT (16)
  25. RCGX (1)
  26. RCMT (31)
  27. RNMG (23)
  28. SCMT (79)
  29. SNGG (7)
  30. SNGP (2)
  31. SNMG (181)
  32. SNMM (75)
  33. SPGT (2)
  34. SPMT (30)
  35. TCGT (19)
  36. TCMT (125)
  37. TDHB (18)
  38. TDHH (14)
  39. TNGG (6)
  40. TNGP (2)
  41. TNMG (237)
  42. TNMM (30)
  43. TPCB (11)
  44. TPCG (7)
  45. TPCH (4)
  46. TPGH (10)
  47. TPGT (29)
  48. TPMT (93)
  49. VBGT (25)
  50. VBMT (72)
  51. VNGG (12)
  52. VNGP (4)
  53. VNMG (84)
  54. VNMP (4)
  55. WCMT (10)
  56. WNGG (8)
  57. WNMG (180)
  58. WPGT (3)
  59. WPGTS (4)
  60. WPMT (17)
  61. WPMTS (4)
Radius°
  1. 0.05 (10)
  2. 0.10 (42)
  3. 0.20 (196)
  4. 0.34 (2)
  5. 0.40 (766)
  6. 0.74 (6)
  7. 0.80 (1022)
  8. 1.14 (7)
  9. 1.20 (550)
  10. 1.60 (221)
  11. 2.40 (80)
  12. 3.20 (5)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...