GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1251 to 1500 of 2618 total

per page
Page:
  2. 4
  3. 5
  4. 6
  5. 7
  6. 8

Set Descending Direction

  1. DNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150608RM KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RM KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMM150612RM KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RM KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RM KCP25B » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RM KCP30 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RM KCP40 » 12.70 15.50 1.20 6.35 5.16
    DNMM150616RM KCP10 » 12.70 15.50 1.60 6.35 5.16
    DNMM150616RM KCP10B » 12.70 15.50 1.60 6.35 5.16
    DNMM150616RM KCP25 » 12.70 15.50 1.60 6.35 5.16
    DNMM-RM

  2. DNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMM150608RP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMM150612RP KCM25 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RP KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RP KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMM150612RP KCP25B » 12.70 15.50 1.20 6.35 5.16
    DNMM150616RP KCP10 » 12.70 15.50 1.60 6.35 5.16
    DNMM150616RP KCP10B » 12.70 15.50 1.60 6.35 5.16
    DNMM150616RP KCP25 » 12.70 15.50 1.60 6.35 5.16
    DNMM150616RP KCP25B » 12.70 15.50 1.60 6.35 5.16
    DNMM-RP

  3. DNMS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMS150408 K68 » 12.70 15.50 0.80 4.76 5.16
    DNMS150408 KC5410 » 12.70 15.50 0.80 4.76 5.16
    DNMS

  4. RCGX-ELF

    Negative ISO insert for Medium machining.

    Product Code  
    RCGX190600ELF KCU10 »
    RCGX2006M0ELF KC725M »
    RCGX-ELF

  5. RNMA

    Negative ISO insert for Medium machining.

    Product Code D S D1  
    RNMA120400 K68 » 12.70 4.76 5.16
    RNMA120400 KCK05 » 12.70 4.76 5.16
    RNMA120400 KCK15 » 12.70 4.76 5.16
    RNMA120400 KCK20 » 12.70 4.76 5.16
    RNMA150600 K68 » 15.88 6.35 6.35
    RNMA190600 K68 » 19.05 6.35 7.93
    RNMA

  6. RNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D S D1  
    RNMG090300RN KCP10 » 9.53 3.18 3.81
    RNMG090300RN KCP10B » 9.53 3.18 3.81
    RNMG090300RN KCP25 » 9.53 3.18 3.81
    RNMG090300RN KCP25B » 9.53 3.18 3.81
    RNMG120400RN KCP10 » 12.70 4.76 5.16
    RNMG120400RN KCP10B » 12.70 4.76 5.16
    RNMG120400RN KCP25 » 12.70 4.76 5.16
    RNMG120400RN KCP25B » 12.70 4.76 5.16
    RNMG120400RN KCP30 » 12.70 4.76 5.16
    RNMG150600RN KCP10 » 15.88 6.35 6.35
    RNMG150600RN KCP25 » 15.88 6.35 6.35
    RNMG150600RN KCP25B » 15.88 6.35 6.35
    RNMG150600RN KCP30 » 15.88 6.35 6.35
    RNMG190600RN KCP10 » 19.05 6.35 7.93
    RNMG190600RN KCP25 » 19.05 6.35 7.93
    RNMG190600RN KCP25B » 19.05 6.35 7.93
    RNMG190600RN KCP30 » 19.05 6.35 7.93
    RNMG250900RN KCP10 » 25.40 9.53 9.12
    RNMG250900RN KCP25 » 25.40 9.53 9.12
    RNMG250900RN KCP30 » 25.40 9.53 9.12
    RNMG-RN

  7. RNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D S D1  
    RNMG120400UN KCK05 » 12.70 4.76 5.16
    RNMG120400UN KCK15 » 12.70 4.76 5.16
    RNMG120400UN KCK15B » 12.70 4.76 5.16
    RNMG120400UN KCK20 » 12.70 4.76 5.16
    RNMG-UN

  8. RNMG

    Negative ISO insert for Rough machining.

    Product Code D S D1  
    RNMG190600 K313 » 19.05 6.35 7.93
    RNMG190600 KCP25 » 19.05 6.35 7.93
    RNMG190600 KCP40 » 19.05 6.35 7.93
    RNMG250900 KCP40 » 25.40 9.53 9.12
    RNMG

  9. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG-FS

  10. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG150612LF KC5010 » 15.88 15.88 1.20 6.35 6.35
    SNGG150612LF KCU10 » 15.88 15.88 1.20 - -
    SNGG-LF

  11. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120404 KC5410 » 12.70 12.70 0.40 4.76 5.16
    SNGP120404 KCU10 » 12.70 12.70 0.40 - -
    SNGP120408 KC5410 » 12.70 12.70 0.80 4.76 5.16
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP

  12. SNMA

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMA120408 K68 » 12.70 12.70 0.80 4.76 5.16
    SNMA120408 KCK05 » 12.70 12.70 0.80 4.76 5.16
    SNMA120408 KCK15 » 12.70 12.70 0.80 4.76 5.16
    SNMA120408 KCK15B » 12.70 12.70 0.80 4.76 5.16
    SNMA120408 KCK20 » 12.70 12.70 0.80 4.76 5.16
    SNMA120412 KCK05 » 12.70 12.70 1.20 4.76 5.16
    SNMA120412 KCK15 » 12.70 12.70 1.20 4.76 5.16
    SNMA120412 KCK15B » 12.70 12.70 1.20 4.76 5.16
    SNMA120412 KCK20 » 12.70 12.70 1.20 4.76 5.16
    SNMA120416 KCK05 » 12.70 12.70 1.60 4.76 5.16
    SNMA120416 KCK15 » 12.70 12.70 1.60 4.76 5.16
    SNMA120416 KCK20 » 12.70 12.70 1.60 4.76 5.16
    SNMA150612 KCK05 » 15.88 15.88 1.20 6.35 6.35
    SNMA150612 KCK15 » 15.88 15.88 1.20 6.35 6.35
    SNMA150612 KCK15B » 15.88 15.88 1.20 6.35 6.35
    SNMA150612 KCK20 » 15.88 15.88 1.20 6.35 6.35
    SNMA150616 KCK05 » 15.88 15.88 1.60 6.35 6.35
    SNMA150616 KCK20 » 15.88 15.88 1.60 6.35 6.35
    SNMA190612 K68 » 19.05 19.05 1.20 6.35 7.93
    SNMA190612 KCK05 » 19.05 19.05 1.20 6.35 7.93
    SNMA190612 KCK15 » 19.05 19.05 1.20 6.35 7.93
    SNMA190612 KCK15B » 19.05 19.05 1.20 6.35 7.93
    SNMA190612 KCK20 » 19.05 19.05 1.20 6.35 7.93
    SNMA190616 K68 » 19.05 19.05 1.60 6.35 7.93
    SNMA190616 KCK05 » 19.05 19.05 1.60 6.35 7.93
    SNMA190616 KCK15 » 19.05 19.05 1.60 6.35 7.93
    SNMA190616 KCK15B » 19.05 19.05 1.60 6.35 7.93
    SNMA190616 KCK20 » 19.05 19.05 1.60 6.35 7.93
    SNMA

  13. SNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090304FF KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FF KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG090308FF KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FF KT315 » 9.53 9.53 0.80 3.18 3.81
    SNMG120404FF KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FF KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG120408FF KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FF KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG-FF

  14. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090304FN KCK05 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP25 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG090308FN KCK05 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FN KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FN KCP25 » 9.53 9.53 0.80 3.18 3.81
    SNMG120404FN KCK05 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP05 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10B » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG120408FN KCK05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP10B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP25B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412FN KCK05 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KT315 » 12.70 12.70 1.20 4.76 5.16
    SNMG120416FN KCK05 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416FN KCP10 » 12.70 12.70 1.60 4.76 5.16
    SNMG-FN

  15. SNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG090304MN KCP25 » 9.53 9.53 0.40 3.18 3.81
    SNMG090308MN KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308MN KCP10B » 9.53 9.53 0.80 3.18 3.81
    SNMG090308MN KCP25 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308MN KCP25B » 9.53 9.53 0.80 3.18 3.81
    SNMG090308MN KCP30 » 9.53 9.53 0.80 3.18 3.81
    SNMG090312MN KCP10 » 9.53 9.53 1.20 3.18 3.81
    SNMG090312MN KCP25 » 9.53 9.53 1.20 3.18 3.81
    SNMG120404MN KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404MN KCP25 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404MN KCP25B » 12.70 12.70 0.40 4.76 5.16
    SNMG120404MN KCP30 » 12.70 12.70 0.40 4.76 5.16
    SNMG120408MN KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MN KCP10B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MN KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MN KCP25B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MN KCP30 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MN KCP40 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412MN KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP30 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMG120416MN KCP10 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416MN KCP25 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416MN KCP25B » 12.70 12.70 1.60 4.76 5.16
    SNMG-MN

  16. SNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG090412RN KCP10 » 9.53 9.53 1.20 4.76 3.81
    SNMG120408RN KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RN KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RN KCP30 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RN KCP40 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412RN KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP30 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMG120416RN KCP10 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416RN KCP10B » 12.70 12.70 1.60 4.76 5.16
    SNMG120416RN KCP25 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416RN KCP25B » 12.70 12.70 1.60 4.76 5.16
    SNMG-RN

  17. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FP KCM15 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG120408FP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FP KCU10 » 12.70 12.70 0.80 - -
    SNMG120408FP KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412FP KCM15 » 12.70 12.70 1.20 4.76 5.16
    SNMG-FP

  18. SNMG

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120408 K68 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412 K68 » 12.70 12.70 1.20 4.76 5.16
    SNMG

  19. SNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120408FW KCP05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FW KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FW KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412FW KCP05 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FW KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FW KT315 » 12.70 12.70 1.20 4.76 5.16
    SNMG-FW

  20. SNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120408MP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MP KCM35 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MP KCU10 » 12.70 12.70 0.80 - -
    SNMG120412MP KCM15 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MP KCM25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MP KCM35 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MP KCU10 » 12.70 12.70 1.20 - -
    SNMG120416MP KCM25 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416MP KCM35 » 12.70 12.70 1.60 4.76 5.16
    SNMG-MP

  21. SNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120408MS K313 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MS KCU10 » 12.70 12.70 0.80 - -
    SNMG120408MS KCU25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412MS KC5525 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MS KCU10 » 12.70 12.70 1.20 - -
    SNMG120412MS KCU25 » 12.70 12.70 1.20 4.76 5.16
    SNMG-MS

  22. SNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120408MW KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408MW KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412MW KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MW KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MW KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG-MW

  23. SNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG120408RP KCK05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCK15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCK20 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCM35 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCP05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCP30 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCP40 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412RP KCK05 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCK15 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCK15B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCK20 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCM15 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCM25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCM35 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP05 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP30 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMG-RP

  24. SNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG120408UN KCK05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UN KCK15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UN KCK15B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UN KCK20 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412UN KCK05 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412UN KCK15 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412UN KCK15B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412UN KCK20 » 12.70 12.70 1.20 4.76 5.16
    SNMG-UN

  25. SNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG120408UP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UP KCM35 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412UP KCM15 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412UP KCM25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412UP KCM35 » 12.70 12.70 1.20 4.76 5.16
    SNMG-UP

  26. SNMG-B

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120416B K68 » 12.70 12.70 1.60 4.76 5.16
    SNMG-B

Items 1251 to 1500 of 2618 total

per page
Page:
  2. 4
  3. 5
  4. 6
  5. 7
  6. 8

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Insert Type: Negative Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (2618)
ISO Insert Range
  1. Beyond Premium (2618)
Material Machining
  1. Steel (1733)
  2. Stainless Steel (726)
  3. Cast Iron (784)
  4. Aluminium (39)
  5. HRSA (542)
  6. Universal (402)
Insert Type
  1. Positive (1993)
Type of Cut
  1. Fine Finishing (19)
  2. Finishing (530)
  3. Wiper Finishing (100)
  4. Medium (683)
  5. Wiper Medium (57)
  6. Medium Roughing (5)
  7. Rough Positive (109)
  8. Rough (841)
  9. Rough Single Sided (274)
Tip Style
  1. CNGG (30)
  2. CNGP (19)
  3. CNMA (27)
  4. CNMG (492)
  5. CNMM (130)
  6. DNGG (23)
  7. DNGP (23)
  8. DNMA (17)
  9. DNMG (474)
  10. DNMM (26)
  11. DNMS (2)
  12. RCGX (2)
  13. RNMA (6)
  14. RNMG (28)
  15. SNGG (7)
  16. SNGP (4)
  17. SNMA (23)
  18. SNMG (288)
  19. SNMM (84)
  20. SNMS (5)
  21. TNGG (8)
  22. TNGP (5)
  23. TNMA (22)
  24. TNMG (342)
  25. TNMM (34)
  26. TNMP (12)
  27. TNMS (5)
  28. VNGG (23)
  29. VNGP (9)
  30. VNMG (128)
  31. VNMP (8)
  32. VNMS (9)
  33. WNGG (9)
  34. WNMA (18)
  35. WNMG (255)
Radius°
  1. 0.10 (28)
  2. 0.20 (46)
  3. 0.34 (2)
  4. 0.40 (399)
  5. 0.74 (6)
  6. 0.80 (850)
  7. 1.14 (7)
  8. 1.20 (784)
  9. 1.60 (360)
  10. 2.40 (87)
  11. 3.20 (6)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...