ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

Achieve higher metal removal rates
(speed, feed, and depth of cut).
Gain longer tool life.

Reliability

Deliver uniform wear for predictable tool life.
Achieve reduced depth-of-cut notching.
Virtually eliminate chip flow damage.

Versatility

Products can be applied across a wide range of applications.
Can be used in low- to high-speed applications.

Complete Portfolio

The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

WNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε
WNMG080408UP KCU10 »	12.70	8.69	0.80

WNMG-RP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
WNMG080408RP KCU25 »	12.70	8.69	0.80	4.76	5.16
WNMG080408RP KCU10 »	12.70	8.69	0.80	-	-
WNMG080408RP KC5010 »	12.70	8.69	0.80	4.76	5.16
WNMG060408RP KCU25 »	9.53	6.52	0.80	4.76	3.81
WNMG060408RP KCU10 »	9.53	6.52	0.80	-	-
WNMG060408RP KC5010 »	9.53	6.52	0.80	4.76	3.81

WNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
WNMG080408MS KCU25 »	12.70	8.69	0.80	4.76	5.16
WNMG060408MS KCU25 »	9.53	6.52	0.80	4.76	3.81

WNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε
WNMG080408MP KCU10 »	12.70	8.69	0.80
WNMG060408MP KCU10 »	9.53	6.52	0.80

WNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG080408FW KCU10 »	12.70	8.69	0.80	-	-
WNMG080408FW KC5010 »	12.70	8.69	0.80	4.76	5.16
WNMG060408FW KCU10 »	9.53	6.52	0.80	-	-
WNMG060408FW KC5010 »	9.53	6.52	0.80	4.76	3.81

WNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG080408FP KCU10 »	12.70	8.69	0.80	-	-
WNMG080408FP KC5010 »	12.70	8.69	0.80	4.76	5.16
WNMG060408FP KCU10 »	9.53	6.52	0.80	-	-
WNMG060408FP KC5010 »	9.53	6.52	0.80	4.76	3.81

WNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG080408FF KCU10 »	12.70	8.69	0.80	-	-
WNMG080408FF KC5010 »	12.70	8.69	0.80	4.76	5.16
WNMG060408FF KCU10 »	9.53	6.52	0.80	-	-
WNMG060408FF KC5010 »	9.53	6.52	0.80	4.76	3.81

WNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNGG080408LF KCU10 »	12.70	8.69	0.80	-	-
WNGG080408LF KC5010 »	12.70	8.69	0.80	4.76	5.16

VNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG220408MS KCU25 »	12.70	22.14	0.80	4.76	5.16
VNMG160408MS KCU25 »	9.53	16.61	0.80	4.76	3.81
VNMG160408MS KCU10 »	9.53	16.61	0.80	-	-

VNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε
VNMG160408UP KCU10 »	9.53	16.61	0.80

VNMG-RP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
VNMG160408RP KCU25 »	9.53	16.61	0.80	4.76	3.81
VNMG160408RP KCU10 »	9.53	16.61	0.80	-	-
VNMG160408RP KC5010 »	9.53	16.61	0.80	4.76	3.81

VNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG160408MP KCU10 »	9.53	16.61	0.80	-	-
VNMG160408MP KC5010 »	9.53	16.61	0.80	4.76	3.81

VNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
VNMG160408FP KCU10 »	9.53	16.61	0.80

VNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
VNMG160408FF KCU10 »	9.53	16.61	0.80

VNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
VNGP220408 KCU10 »	12.70	22.14	0.80

VNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNGG220408LF KCU10 »	12.70	22.14	0.80	-	-
VNGG220408LF KC5010 »	12.70	22.14	0.80	4.76	5.16
VNGG160408LF KCU10 »	9.53	16.61	0.80	-	-
VNGG160408LF KC5010 »	9.53	16.61	0.80	4.76	3.81

VNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNGG160408FS KCU25 »	9.53	16.61	0.80	4.76	3.81

TNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
TNMG270608MS KCU25 »	15.88	27.50	0.80	6.35	6.35
TNMG220408MS KCU25 »	12.70	22.00	0.80	4.76	5.16
TNMG220408MS KCU10 »	12.70	22.00	0.80	-	-
TNMG160408MS KCU25 »	9.53	16.50	0.80	4.76	3.81
TNMG160408MS KCU10 »	9.53	16.50	0.80	-	-

TNMG-RP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
TNMG220408RP KCU25 »	12.70	22.00	0.80	4.76	5.16
TNMG220408RP KCU10 »	12.70	22.00	0.80	-	-
TNMG160408RP KCU25 »	9.53	16.50	0.80	4.76	3.81
TNMG160408RP KCU10 »	9.53	16.50	0.80	-	-

TNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε
TNMG220408MP KCU10 »	12.70	22.00	0.80
TNMG160408MP KCU10 »	9.53	16.50	0.80

TNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG220408FP KC5010 »	12.70	22.00	0.80	4.76	5.16
TNMG160408FP KC5010 »	9.53	16.50	0.80	4.76	3.81

TNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG160408FW KCU10 »	9.53	16.50	0.80	-	-
TNMG160408FW KC5010 »	9.53	16.50	0.80	4.76	3.81

TNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG160408FF KCU10 »	9.53	16.50	0.80	-	-
TNMG160408FF KC5010 »	9.53	16.50	0.80	4.76	3.81
TNMG110308FF KC5010 »	6.35	11.00	0.80	3.18	2.26

TNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
TNGP160408 KCU10 »	9.53	16.50	0.80

TNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNGG220408FS KCU25 »	12.70	22.00	0.80	4.76	5.16
TNGG220408FS KCU10 »	12.70	22.00	0.80	-	-
TNGG160408FS KCU25 »	9.53	16.50	0.80	4.76	3.81

SNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
SNMG150608MS KCU25 »	15.88	15.88	0.80	6.35	6.35
SNMG120408MS KCU25 »	12.70	12.70	0.80	4.76	5.16
SNMG120408MS KCU10 »	12.70	12.70	0.80	-	-

SNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε
SNMG120408MP KCU10 »	12.70	12.70	0.80

SNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
SNMG120408FP KCU10 »	12.70	12.70	0.80

SNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
SNGP120408 KCU10 »	12.70	12.70	0.80	4.76	5.16

SNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
SNGG120408FS KCU10 »	12.70	12.70	0.80	-	-
SNGG090308FS KCU25 »	9.53	9.53	0.80	3.18	3.81
SNGG090308FS KCU10 »	9.53	9.53	0.80	-	-

SNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
SNGG090308LF KCU10 »	9.53	9.53	0.80	-	-
SNGG090308LF KC5010 »	9.53	9.53	0.80	3.18	3.81

DNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
DNMG150608UP KCU10 »	12.70	15.50	0.80	-	-
DNMG150608UP KC5010 »	12.70	15.50	0.80	6.35	5.16
DNMG150408UP KCU10 »	12.70	15.50	0.80	-	-
DNMG150408UP KC5010 »	12.70	15.50	0.80	4.76	5.16
DNMG110408UP KCU10 »	9.53	11.63	0.80	-	-
DNMG110408UP KC5010 »	9.53	11.63	0.80	4.76	3.81

DNMG-RP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
DNMG150608RP KCU10 »	12.70	15.50	0.80	-	-
DNMG150408RP KCU10 »	12.70	15.50	0.80	-	-
DNMG110408RP KCU25 »	9.53	11.63	0.80	4.76	3.81
DNMG110408RP KCU10 »	9.53	11.63	0.80	-	-

DNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
DNMG150608MS KCU25 »	12.70	15.50	0.80	6.35	5.16
DNMG150608MS KCU10 »	12.70	15.50	0.80	-	-
DNMG150408MS KCU25 »	12.70	15.50	0.80	4.76	5.16
DNMG150408MS KCU10 »	12.70	15.50	0.80	-	-
DNMG110408MS KCU25 »	9.53	11.63	0.80	4.76	3.81
DNMG110408MS KCU10 »	9.53	11.63	0.80	-	-

DNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
DNMG150608MP KCU25 »	12.70	15.50	0.80	6.35	5.16
DNMG150608MP KCU10 »	12.70	15.50	0.80	-	-
DNMG150608MP KC5010 »	12.70	15.50	0.80	6.35	5.16
DNMG150408MP KC5010 »	12.70	15.50	0.80	4.76	5.16
DNMG110408MP KCU10 »	9.53	11.63	0.80	-	-
DNMG110408MP KC5010 »	9.53	11.63	0.80	4.76	3.81

DNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
DNMG150608FF KCU10 »	12.70	15.50	0.80
DNMG150408FF KCU10 »	12.70	15.50	0.80
DNMG110408FF KCU10 »	9.53	11.63	0.80

DNMG-CT

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG150408CT KCU10 »	12.70	15.50	0.80	-	-
DNMG150408CT KC5010 »	12.70	15.50	0.80	4.76	5.16
DNMG110408CT KC5010 »	9.53	11.63	0.80	4.76	3.81

DNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG110408FW KC5010 »	9.53	11.63	0.80	4.76	3.81

DNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGP150608 KCU10 »	12.70	15.50	0.80	-	-
DNGP150608 KC5010 »	12.70	15.50	0.80	6.35	5.16
DNGP150408 KCU10 »	12.70	15.50	0.80	-	-
DNGP150408 KC5010 »	12.70	15.50	0.80	4.76	5.16

DNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGG150408LF KCU10 »	12.70	15.50	0.80	-	-
DNGG150408LF KC5010 »	12.70	15.50	0.80	4.76	5.16

DNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGG150408FS KCU25 »	12.70	15.50	0.80	4.76	5.16

CNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG190608MS KCU25 »	19.05	19.34	0.80	6.35	7.93
CNMG190608MS KCU10 »	19.05	19.34	0.80	-	-
CNMG160608MS KCU25 »	15.88	16.12	0.80	6.35	6.35
CNMG160608MS KCU10 »	15.88	16.12	0.80	-	-
CNMG120408MS KCU25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MS KCU10 »	12.70	12.90	0.80	-	-

CNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG190608MP KCU10 »	19.05	19.34	0.80	-	-
CNMG190608MP KC5010 »	19.05	19.34	0.80	6.35	7.93
CNMG160608MP KCU10 »	15.88	16.12	0.80	-	-
CNMG160608MP KC5010 »	15.88	16.12	0.80	6.35	6.35
CNMG120408MP KCU25 »	12.70	12.90	0.80	4.76	5.16
CNMG120408MP KCU10 »	12.70	12.90	0.80	-	-
CNMG120408MP KC5010 »	12.70	12.90	0.80	4.76	5.16
CNMG090308MP KCU10 »	9.53	9.67	0.80	-	-
CNMG090308MP KC5010 »	9.53	9.67	0.80	3.18	3.81

CNMG-RP

Negative ISO insert for Rough Positive machining.

Product Code	D	L10	Rε	S	D1
CNMG160608RP KCU25 »	15.88	16.12	0.80	6.35	6.35
CNMG160608RP KCU10 »	15.88	16.12	0.80	-	-
CNMG120408RP KCU25 »	12.70	12.90	0.80	-	-
CNMG120408RP KCU10 »	12.70	12.90	0.80	-	-

CNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε
CNMG120408FW KCU10 »	12.70	12.90	0.80

CNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120408FP KCU10 »	12.70	12.90	0.80	-	-
CNMG120408FP KC5010 »	12.70	12.90	0.80	4.76	5.16

CNMG-FF

Negative ISO insert for Fine Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120408FF KCU10 »	12.70	12.90	0.80	-	-
CNMG120408FF KC5010 »	12.70	12.90	0.80	4.76	5.16
CNMG090308FF KCU10 »	9.53	9.67	0.80	-	-
CNMG090308FF KC5010 »	9.53	9.67	0.80	3.18	3.81

CNMG-CT

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120408CT KCU10 »	12.70	12.90	0.80	-	-
CNMG120408CT KC5010 »	12.70	12.90	0.80	4.76	5.16

CNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
CNGP120408 KCU10 »	12.70	12.90	0.80

CNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNGG160608LF KCU10 »	15.88	16.12	0.80	-	-
CNGG160608LF KC5010 »	15.88	16.12	0.80	6.35	6.35
CNGG120408LF KCU10 »	12.70	12.90	0.80	-	-
CNGG120408LF KC5010 »	12.70	12.90	0.80	4.76	5.16

CNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNGG120408FS KCU25 »	12.70	12.90	0.80	4.76	5.16