GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 550 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Ascending Direction

  1. WNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε  
    WNMG080412UP KCU10 » 12.70 8.69 1.20
    WNMG-UP

  2. WNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080412RP KCU25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412RP KCP40 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP30 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG060412RP KCP25 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412RP KCP10 » 9.53 6.52 1.20 4.76 3.81
    WNMG-RP

  3. WNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080412RN KCP40 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP30 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG060412RN KCP25 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412RN KCP10 » 9.53 6.52 1.20 4.76 3.81
    WNMG-RN

  4. WNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080412MW KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG060412MW KCP25 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412MW KCP10 » 9.53 6.52 1.20 4.76 3.81
    WNMG-MW

  5. WNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080412MP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412MP KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG-MP

  6. WNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080412MN KCP40 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG060412MN KCP25 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412MN KCP10 » 9.53 6.52 1.20 4.76 3.81
    WNMG-MN

  7. WNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080412FW KT315 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KC5010 » 12.70 8.69 1.20 4.76 5.16
    WNMG060412FW KCP10 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412FW KCP05 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412FW KC5010 » 9.53 6.52 1.20 4.76 3.81
    WNMG-FW

  8. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080412FP KC5010 » 12.70 8.69 1.20 4.76 5.16
    WNMG-FP

  9. VNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG220412RN KCP30 » 12.70 22.14 1.20 4.76 5.16
    VNMG220412RN KCP25 » 12.70 22.14 1.20 4.76 5.16
    VNMG220412RN KCP10 » 12.70 22.14 1.20 4.76 5.16
    VNMG160412RN KCP25B » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RN KCP25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RN KCP10 » 9.53 16.61 1.20 4.76 3.81
    VNMG-RN

  10. VNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG220408MS KCU10 » 12.70 22.14 1.20 4.76 5.16
    VNMG220404MS KCU10 » 12.70 22.14 1.20 4.76 5.16
    VNMG-MS

  11. VNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160412RP KCU25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCU10 » 9.53 16.61 1.20 - -
    VNMG160412RP KCP25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCP10 » 9.53 16.61 1.20 4.76 3.81
    VNMG-RP

  12. VNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160412MP KCU10 » 9.53 16.61 1.20 - -
    VNMG160412MP KC5010 » 9.53 16.61 1.20 4.76 3.81
    VNMG-MP

  13. VNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160412MN KCP30 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412MN KCP25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412MN KCP10 » 9.53 16.61 1.20 4.76 3.81
    VNMG-MN

  14. VBMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBMT160412FP KCP25B » 9.53 16.61 1.20 4.76 4.40
    VBMT160412FP KCP25 » 9.53 16.61 1.20 4.76 4.40
    VBMT-FP

  15. TPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TPMT16T312MP KCP25B » 9.53 16.50 1.20 3.97 4.40
    TPMT16T312MP KCP25 » 9.53 16.50 1.20 3.97 4.40
    TPMT-MP

  16. TPMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TPMT16T312MF KCP25 » 9.53 16.50 1.20 3.97 4.40
    TPMT-MF

  17. TPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPMT16T312LF KT315 » 9.53 16.50 1.20 3.97 4.40
    TPMT-LF

  18. TNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    TNMM270612RM KCP30 » 15.88 27.50 1.20 6.35 6.35
    TNMM270612RM KCP25 » 15.88 27.50 1.20 6.35 6.35
    TNMM220412RM KCP30 » 12.70 22.00 1.20 4.76 5.16
    TNMM220412RM KCP25B » 12.70 22.00 1.20 4.76 5.16
    TNMM220412RM KCP25 » 12.70 22.00 1.20 4.76 5.16
    TNMM160412RM KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMM-RM

  19. TNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    TNMM220412RP KCP25 » 12.70 22.00 1.20 4.76 5.16
    TNMM220412RP KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMM160412RP KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMM-RP

  20. TNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG270612RP KCU25 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RP KCU10 » 15.88 27.50 1.20 - -
    TNMG270612RP KCP25B » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RP KCP25 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RP KCP10 » 15.88 27.50 1.20 6.35 6.35
    TNMG220412RP KCU25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCU10 » 12.70 22.00 1.20 - -
    TNMG220412RP KCP40 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCP30 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCP25B » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCP25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG160412RP KCU25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCP25B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG-RP

  21. TNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG270612RN KCP40 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RN KCP30 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RN KCP25 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RN KCP10B » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RN KCP10 » 15.88 27.50 1.20 6.35 6.35
    TNMG220412RN KCP40 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RN KCP30 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RN KCP25B » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RN KCP25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RN KCP10B » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RN KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG160412RN KCP30 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RN KCP25B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RN KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RN KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RN KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG-RN

  22. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG220412MS KCU25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MS KCU10 » 12.70 22.00 1.20 - -
    TNMG-MS

  23. TNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    TNMG220412MP KCU10 » 12.70 22.00 1.20
    TNMG160412MP KCU10 » 9.53 16.50 1.20
    TNMG-MP

  24. TNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG220412MN KCP40 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MN KCP30 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MN KCP25B » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MN KCP25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MN KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG160412MN KCP40 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP30 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP25B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MN KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG-MN

  25. TNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220412FN KCP25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412FN KCP10B » 12.70 22.00 1.20 4.76 5.16
    TNMG220412FN KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG160412FN KT315 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP25B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FN KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG-FN

  26. TNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220412CT KCP10 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412CT KCP05 » 12.70 22.00 1.20 4.76 5.16
    TNMG-CT

  27. TNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160412MW KCP25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MW KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MW KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MW KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG-MW

  28. TNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160412FW KT315 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FW KCU10 » 9.53 16.50 1.20 - -
    TNMG160412FW KCP10B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FW KCP10 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FW KCP05 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412FW KC5010 » 9.53 16.50 1.20 4.76 3.81
    TNMG-FW

  29. TCMT-MP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T312MP KCP25 » 9.53 16.50 1.20 3.97 4.40
    TCMT-MP

  30. TCMT-MF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T312MF KCP25B » 9.53 16.50 1.20 3.97 4.40
    TCMT16T312MF KCP25 » 9.53 16.50 1.20 3.97 4.40
    TCMT16T312MF KCP10 » 9.53 16.50 1.20 3.97 4.40
    TCMT-MF

  31. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T312LF KCP25 » 9.53 16.50 1.20 3.97 4.40
    TCMT16T312LF KC5025 » 9.53 16.50 1.20 3.97 4.40
    TCMT16T312LF KC5010 » 9.53 16.50 1.20 3.97 4.40
    TCMT-LF

  32. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T312FP KCU25 » 9.53 16.50 1.20 3.97 4.40
    TCMT16T312FP KCU10 » 9.53 16.50 1.20 3.97 4.40
    TCMT16T312FP KCP10B » 9.53 16.50 1.20 3.97 4.40
    TCMT16T312FP KCP10 » 9.53 16.50 1.20 3.97 4.40
    TCMT110312FP KCU10 » 6.35 11.00 1.20 3.18 2.80
    TCMT110312FP KCP05 » 6.35 11.00 1.20 3.18 2.80
    TCMT-FP

  33. SNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM190612RP KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RP KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM150612RP KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RP KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMM120412RP KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMM120412RP KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMM-RP

  34. SNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM190612RM KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMM150612RM KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RM KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMM120412RM KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMM-RM

  35. SNMM-RH

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM190612RH KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMM-RH

  36. SNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG190612RP KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RP KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RP KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RP KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RP KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMG150612RP KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCP30 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCP25B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCP10B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMG120412RP KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP30 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCP05 » 12.70 12.70 1.20 4.76 5.16
    SNMG-RP

  37. SNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG190612RN KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RN KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RN KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RN KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RN KCP10B » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RN KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMG150612RN KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RN KCP30 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RN KCP25B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RN KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RN KCP10B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RN KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMG120412RN KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP30 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RN KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG-RN

  38. SNMG-RM

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG190612RM KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RM KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMG-RM

  39. SNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG190612MS KCU25 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612MS KCU10 » 19.05 19.05 1.20 - -
    SNMG150612MS KCU25 » 15.88 15.88 1.20 6.35 6.35
    SNMG120412MS KCU25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MS KCU10 » 12.70 12.70 1.20 - -
    SNMG-MS

  40. SNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    SNMG190612MP KCU10 » 19.05 19.05 1.20
    SNMG150612MP KCU10 » 15.88 15.88 1.20
    SNMG120412MP KCU10 » 12.70 12.70 1.20
    SNMG-MP

  41. SNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SNMG190612MN KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612MN KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMG190612MN KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612MN KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMG150612MN KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612MN KCP25B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612MN KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612MN KCP10B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612MN KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMG120412MN KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP30 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MN KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG-MN

  42. SNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG150612UP KCU10 » 15.88 15.88 1.20 - -
    SNMG150612UP KC5010 » 15.88 15.88 1.20 6.35 6.35
    SNMG-UP

  43. SNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    SNMG120412MW KCP25B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MW KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412MW KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG-MW

  44. SNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120412FW KT315 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FW KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FW KCP05 » 12.70 12.70 1.20 4.76 5.16
    SNMG-FW

Items 1 to 250 of 550 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. ISO Insert Range: Beyond Premium Remove This Item
  2. Material Machining: Steel Remove This Item
  3. Radius°: 1.20 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (550)
Material Machining
  1. Stainless Steel (235)
  2. Cast Iron (263)
  3. Aluminium (4)
  4. HRSA (111)
  5. Universal (88)
Insert Type
  1. Negative (492)
  2. Positive (58)
Type of Cut
  1. Finishing (84)
  2. Wiper Finishing (22)
  3. Medium (150)
  4. Wiper Medium (27)
  5. Rough Positive (25)
  6. Rough (167)
  7. Rough Single Sided (75)
Tip Style
  1. CCMT (13)
  2. CNGG (4)
  3. CNMG (105)
  4. CNMM (38)
  5. CPMT (2)
  6. DCMT (12)
  7. DNMG (95)
  8. DNMM (10)
  9. SCMT (12)
  10. SNGG (2)
  11. SNMG (76)
  12. SNMM (18)
  13. TCMT (13)
  14. TNMG (71)
  15. TNMM (9)
  16. TPMT (4)
  17. VBMT (2)
  18. VNMG (17)
  19. WNMG (47)
Radius°
  1. 0.05 (10)
  2. 0.10 (42)
  3. 0.20 (196)
  4. 0.34 (2)
  5. 0.40 (766)
  6. 0.74 (6)
  7. 0.80 (1022)
  8. 1.14 (7)
  9. 1.60 (221)
  10. 2.40 (80)
  11. 3.20 (5)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...