GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 251 to 359 of 359 total

per page
Page:
  2. 1
  3. 2

Set Descending Direction

  1. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150608FW KCP05 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCP10 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCP10B » 12.70 15.50 0.41 6.35 5.16
    DNMG150608FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150608FW KT315 » 12.70 15.50 0.41 6.35 5.16
    DNMG-FW

  2. DNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150608MN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG150612MN KCP05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MN KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MN KCP10B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MN KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MN KCP25B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MN KCP40 » 12.70 15.50 1.20 6.35 5.16
    DNMG190612MN KCP10 » 15.88 19.38 1.20 6.35 6.35
    DNMG190612MN KCP10B » 15.88 19.38 1.20 6.35 6.35
    DNMG190612MN KCP30 » 15.88 19.38 1.20 6.35 6.35
    DNMG-MN

  3. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150612MP KC5010 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MP KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MP KCU10 » 12.70 15.50 1.20 - -
    DNMG150612MP KCU25 » 12.70 15.50 1.20 6.35 5.16
    DNMG-MP

  4. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150612MS KCU10 » 12.70 15.50 1.20 - -
    DNMG150612MS KCU25 » 12.70 15.50 1.20 6.35 5.16
    DNMG-MS

  5. DNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150608MW KCP05 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608MW KCP10 » 12.70 15.50 0.41 6.35 5.16
    DNMG150608MW KCP10B » 12.70 15.50 0.41 6.35 5.16
    DNMG150608MW KCP25 » 12.70 15.50 0.41 6.35 5.16
    DNMG150612MW KCP05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MW KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MW KCP10B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MW KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MW KCP25B » 12.70 15.50 1.20 6.35 5.16
    DNMG-MW

  6. DNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150608RN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG150612RN KCP05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RN KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RN KCP10B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RN KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RN KCP25B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RN KCP30 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RN KCP40 » 12.70 15.50 1.20 6.35 5.16
    DNMG150616RN KCP10 » 12.70 15.50 1.60 6.35 5.16
    DNMG150616RN KCP10B » 12.70 15.50 1.60 6.35 5.16
    DNMG150616RN KCP25 » 12.70 15.50 1.60 6.35 5.16
    DNMG150616RN KCP25B » 12.70 15.50 1.60 6.35 5.16
    DNMG150616RN KCP30 » 12.70 15.50 1.60 6.35 5.16
    DNMG150616RN KCP40 » 12.70 15.50 1.60 6.35 5.16
    DNMG190608RN KCP10 » 15.88 19.38 0.80 6.35 6.35
    DNMG190608RN KCP10B » 15.88 19.38 0.80 6.35 6.35
    DNMG190608RN KCP25 » 15.88 19.38 0.80 6.35 6.35
    DNMG190608RN KCP30 » 15.88 19.38 0.80 6.35 6.35
    DNMG190612RN KCP10 » 15.88 19.38 1.20 6.35 6.35
    DNMG190612RN KCP10B » 15.88 19.38 1.20 6.35 6.35
    DNMG190612RN KCP25 » 15.88 19.38 1.20 6.35 6.35
    DNMG190612RN KCP30 » 15.88 19.38 1.20 6.35 6.35
    DNMG-RN

  7. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150608RP KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150612RP KCP05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCP10B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCP25B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCP30 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCP40 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCU10 » 12.70 15.50 1.20 - -
    DNMG150616RP KCP10 » 12.70 15.50 1.60 6.35 5.16
    DNMG150616RP KCP10B » 12.70 15.50 1.60 6.35 5.16
    DNMG150616RP KCP25 » 12.70 15.50 1.60 6.35 5.16
    DNMG150616RP KCP25B » 12.70 15.50 1.60 6.35 5.16
    DNMG150616RP KCP30 » 12.70 15.50 1.60 6.35 5.16
    DNMG-RP

  8. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150612UP KC5010 » 12.70 15.50 1.20 6.35 5.16
    DNMG-UP

  9. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150612CT KC5010 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP05 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP25 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP25B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCU10 » 12.70 15.50 1.14 - -
    DNMG-CT

  10. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150612FN KCP05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KT315 » 12.70 15.50 1.20 6.35 5.16
    DNMG-FN

  11. DNMG-RM

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG190608RM KCP25 » 15.88 19.38 0.80 6.35 6.35
    DNMG190612RM KCP25 » 15.88 19.38 1.20 6.35 6.35
    DNMG-RM

Items 251 to 359 of 359 total

per page
Page:
  2. 1
  3. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. ISO Insert Range: Beyond Premium Remove This Item
  2. Material Machining: Steel Remove This Item
  3. Tip Style: DNMG Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (359)
Material Machining
  1. Stainless Steel (138)
  2. Cast Iron (134)
  3. HRSA (92)
  4. Universal (83)
Insert Type
  1. Negative (359)
Type of Cut
  1. Finishing (113)
  2. Wiper Finishing (32)
  3. Medium (97)
  4. Wiper Medium (16)
  5. Rough (101)
Tip Style
  1. CCGT (34)
  2. CCMT (174)
  3. CDG (6)
  4. CDHBS (15)
  5. CDHHS (18)
  6. CDT (2)
  7. CNGG (17)
  8. CNGP (4)
  9. CNMG (337)
  10. CNMM (113)
  11. CPG (2)
  12. CPGH (21)
  13. CPGT (20)
  14. CPMT (117)
  15. DCGT (15)
  16. DCMT (136)
  17. DNGG (11)
  18. DNGP (12)
  19. DNMM (24)
  20. DPGT (32)
  21. DPMT (56)
  22. RCGH (1)
  23. RCGT (16)
  24. RCGX (1)
  25. RCMT (31)
  26. RNMG (23)
  27. SCMT (79)
  28. SNGG (7)
  29. SNGP (2)
  30. SNMG (181)
  31. SNMM (75)
  32. SPGT (2)
  33. SPMT (30)
  34. TCGT (19)
  35. TCMT (125)
  36. TDHB (18)
  37. TDHH (14)
  38. TNGG (6)
  39. TNGP (2)
  40. TNMG (237)
  41. TNMM (30)
  42. TPCB (11)
  43. TPCG (7)
  44. TPCH (4)
  45. TPGH (10)
  46. TPGT (29)
  47. TPMT (93)
  48. VBGT (25)
  49. VBMT (72)
  50. VNGG (12)
  51. VNGP (4)
  52. VNMG (84)
  53. VNMP (4)
  54. WCMT (10)
  55. WNGG (8)
  56. WNMG (180)
  57. WPGT (3)
  58. WPGTS (4)
  59. WPMT (17)
  60. WPMTS (4)
Radius°
  1. 0.10 (1)
  2. 0.20 (2)
  3. 0.34 (2)
  4. 0.40 (102)
  5. 0.74 (6)
  6. 0.80 (128)
  7. 1.14 (7)
  8. 1.20 (95)
  9. 1.60 (16)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...