GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 251 to 337 of 337 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
  1. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    DCGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DCGT070204HP K313 » 6.35 7.75 0.40 2.38 2.80
    DCGT-HP
  2. CPMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10  
    CPMT09T304MW KCU10 » 9.53 9.67 0.40
    CPMT-MW
  3. CPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CPMT09T304LF K313 » 9.53 9.67 0.40 3.97 4.40
    CPMT060204LF K313 » 6.35 6.45 0.40 2.38 2.80
    CPMT050204LF K313 » 5.56 5.65 0.40 2.38 2.65
    CPMT-LF
  4. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10  
    CPMT09T304FW KCU10 » 9.53 9.67 0.40
    CPMT060204FW KCU10 » 6.35 6.45 0.40
    CPMT-FW
  5. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CPMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CPMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CPMT050204FP KCU25 » 5.56 5.65 0.40 2.38 2.50
    CPMT050204FP KCU10 » 5.56 5.65 0.40 2.38 2.50
    CPMT-FP
  6. CPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10  
    CPGT09T304LF KCU10 » 9.53 9.67 0.40
    CPGT060204LF KCU10 » 6.35 6.45 0.40
    CPGT-LF
  7. CPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CPGT09T304HP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGT09T304HP KCU10 » 9.53 9.67 0.40 - -
    CPGT060204HP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CPGT060204HP KCU10 » 6.35 6.45 0.40 - -
    CPGT060204HP KC5025 » 6.35 6.45 0.40 2.38 2.80
    CPGT-HP
  8. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CPGH09T304 KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KCU10 » 9.53 9.67 0.40 - -
    CPGH09T304 KC5025 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KC5010 » 9.53 9.67 0.40 3.97 4.40
    CPGH
  9. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 S D1  
    CNMG120404RP KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCU10 » 12.70 12.90 0.40 - -
    CNMG-RP
  10. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 S D1  
    CNMG120404MS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MS KCU10 » 12.70 12.90 0.40 - -
    CNMG120404MS K313 » 12.70 12.90 0.40 4.76 5.16
    CNMG-MS
  11. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 S D1  
    CNMG120404MP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404MP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG-MP
  12. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 S D1  
    CNMG120404FW KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FW KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FW
  13. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FP
  14. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 S D1  
    CNMG120404FF KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG090304FF KCU10 » 9.53 9.67 0.40 - -
    CNMG090304FF KC5010 » 9.53 9.67 0.40 3.18 3.81
    CNMG-FF
  15. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CNGP120404 KCU10 » 12.70 12.90 0.40 - -
    CNGP120404 K313 » 12.70 12.90 0.40 4.76 5.16
    CNGP120404 K10U » 12.70 12.90 0.40 - -
    CNGP
  16. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CNGG120404LF KCU10 » 12.70 12.90 0.40 - -
    CNGG120404LF KC730 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404LF K313 » 12.70 12.90 0.40 4.76 5.16
    CNGG-LF
  17. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CNGG120404FS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNGG120404FS K313 » 12.70 12.90 0.40 4.76 5.16
    CNGG-FS
  18. CDHHS-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CDHHS4T004R KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004R KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-R
  19. CDHHS-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CDHHS4T004L KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004L KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-L
  20. CDHBS

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CDHBS4T004 KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KCU10 » 3.97 4.03 0.38 - -
    CDHBS4T004 KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 K313 » 3.97 4.03 0.38 1.02 2.13
    CDHBS
  21. CCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10  
    CCMT120404MW KCU10 » 12.70 12.90 0.40
    CCMT09T304MW KCU10 » 9.53 9.67 0.40
    CCMT-MW
  22. CCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CCMT120404FP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCU10 » 12.70 12.90 0.40 4.76 5.50
    CCMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT-FP
  23. CCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 S D1  
    CCMT09T304MP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204MP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT-MP
  24. CCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CCGT120404HP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCGT120404HP KCU10 » 12.70 12.90 0.40 - -
    CCGT120404HP K313 » 12.70 12.90 0.40 4.76 5.50
    CCGT09T304HP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCGT09T304HP KCU10 » 9.53 9.67 0.40 - -
    CCGT09T304HP K313 » 9.53 9.67 0.40 3.97 4.40
    CCGT060204HP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCGT060204HP KCU10 » 6.35 6.45 0.40 - -
    CCGT060204HP K313 » 6.35 6.45 0.40 2.38 2.80
    CCGT-HP
  25. CCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 S D1  
    CCGT09T3X0LF KC5025 » 9.53 9.67 0.04 3.97 4.40
    CCGT09T304LF KCU10 » 9.53 9.67 0.40 - -
    CCGT0602X0LF KC5025 » 6.35 6.45 0.04 2.38 2.80
    CCGT060204LF KCU10 » 6.35 6.45 0.40 - -
    CCGT060204LF KC5025 » 6.35 6.45 0.40 2.38 2.80
    CCGT-LF

Items 251 to 337 of 337 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction

Please wait...