ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

Achieve higher metal removal rates
(speed, feed, and depth of cut).
Gain longer tool life.

Reliability

Deliver uniform wear for predictable tool life.
Achieve reduced depth-of-cut notching.
Virtually eliminate chip flow damage.

Versatility

Products can be applied across a wide range of applications.
Can be used in low- to high-speed applications.

Complete Portfolio

The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

WNMG-UN

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
WNMG080404UN KCK20 »	12.70	8.69	0.40	4.76	5.16
WNMG080404UN KCK15 »	12.70	8.69	0.40	4.76	5.16
WNMG080404UN KCK05 »	12.70	8.69	0.40	4.76	5.16
WNMG060404UN KCK20 »	9.53	6.52	0.40	4.76	3.81
WNMG060404UN KCK15 »	9.53	6.52	0.40	4.76	3.81
WNMG060404UN KCK05 »	9.53	6.52	0.40	4.76	3.81

WNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
WNMG080404MS KCU25 »	12.70	8.69	0.40	4.76	5.16

WNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG080404FW KCU10 »	12.70	8.69	0.40	-	-
WNMG080404FW KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG060404FW KCU10 »	9.53	6.52	0.40	-	-
WNMG060404FW KC5010 »	9.53	6.52	0.40	4.76	3.81

WNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG080404FP KCU10 »	12.70	8.69	0.40	-	-
WNMG080404FP KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG060404FP KCU10 »	9.53	6.52	0.40	-	-
WNMG060404FP KC5010 »	9.53	6.52	0.40	4.76	3.81

WNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG080404FF KCU10 »	12.70	8.69	0.40	-	-
WNMG080404FF KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG060404FF KCU10 »	9.53	6.52	0.40	-	-
WNMG060404FF KC5010 »	9.53	6.52	0.40	4.76	3.81

WNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε
WNMG060404MP KCU10 »	9.53	6.52	0.40

WNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNGG080404LF KCU10 »	12.70	8.69	0.40	-	-
WNGG080404LF KC5010 »	12.70	8.69	0.40	4.76	5.16

VNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG220404MS KCU25 »	12.70	22.14	0.40	4.76	5.16
VNMG160404MS KCU25 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MS KCU10 »	9.53	16.61	0.40	-	-

VNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε
VNMG160404UP KCU10 »	9.53	16.61	0.40

VNMG-UN

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
VNMG160404UN KCK20 »	9.53	16.61	0.40	4.76	3.81
VNMG160404UN KCK15B »	9.53	16.61	0.40	4.76	3.81
VNMG160404UN KCK15 »	9.53	16.61	0.40	4.76	3.81
VNMG160404UN KCK05 »	9.53	16.61	0.40	4.76	3.81

VNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG160404MP KCU10 »	9.53	16.61	0.40	-	-
VNMG160404MP KC5010 »	9.53	16.61	0.40	4.76	3.81

VNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
VNMG160404FP KCU10 »	9.53	16.61	0.40

VNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNMG160404FN KCK05 »	9.53	16.61	0.40	4.76	3.81

VNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
VNMG160404FF KCU10 »	9.53	16.61	0.40

VNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNGG160404LF KCU10 »	9.53	16.61	0.40	-	-
VNGG160404LF KC5010 »	9.53	16.61	0.40	4.76	3.81

VNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNGG160404FS KCU25 »	9.53	16.61	0.40	4.76	3.81

TNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
TNMG220404MS KCU25 »	12.70	22.00	0.40	4.76	5.16
TNMG220404MS KCU10 »	12.70	22.00	0.40	-	-
TNMG160404MS KCU25 »	9.53	16.50	0.40	4.76	3.81
TNMG160404MS KCU10 »	9.53	16.50	0.40	-	-

TNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG220404FP KC5010 »	12.70	22.00	0.40	4.76	5.16
TNMG160404FP KC5010 »	9.53	16.50	0.40	4.76	3.81

TNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG220404FN KCK05 »	12.70	22.00	0.40	4.76	5.16
TNMG160404FN KCK05 »	9.53	16.50	0.40	4.76	3.81
TNMG110304FN KCK05 »	6.35	11.00	0.40	3.18	2.26

TNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε
TNMG160404MP KCU10 »	9.53	16.50	0.40

TNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG160404FW KCU10 »	9.53	16.50	0.40	-	-
TNMG160404FW KC5010 »	9.53	16.50	0.40	4.76	3.81

TNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNMG160404FF KCU10 »	9.53	16.50	0.40	-	-
TNMG160404FF KC5010 »	9.53	16.50	0.40	4.76	3.81
TNMG110304FF KCU10 »	6.35	11.00	0.40	-	-
TNMG110304FF KC5010 »	6.35	11.00	0.40	3.18	2.26

TNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
TNGP160404 KCU10 »	9.53	16.50	0.40

TNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TNGG160404FS KCU25 »	9.53	16.50	0.40	4.76	3.81
TNGG160404FS KCU10 »	9.53	16.50	0.40	-	-

SNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
SNMG120404FP KCU10 »	12.70	12.70	0.40	-	-
SNMG120404FP KC5010 »	12.70	12.70	0.40	4.76	5.16

SNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
SNMG120404FN KCK05 »	12.70	12.70	0.40	4.76	5.16
SNMG090304FN KCK05 »	9.53	9.53	0.40	3.18	3.81

SNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
SNGP120404 KCU10 »	12.70	12.70	0.40

DNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG150608FW KCU10 »	12.70	15.50	0.41	-	-
DNMG150608FW KC5010 »	12.70	15.50	0.41	6.35	5.16
DNMG150604FW KCU10 »	12.70	15.50	0.40	-	-
DNMG150604FW KC5010 »	12.70	15.50	0.40	6.35	5.16
DNMG150408FW KCU10 »	12.70	15.50	0.41	-	-
DNMG150408FW KC5010 »	12.70	15.50	0.41	4.76	5.16
DNMG150404FW KCU10 »	12.70	15.50	0.40	-	-
DNMG150404FW KC5010 »	12.70	15.50	0.40	4.76	5.16
DNMG110404FW KCU10 »	9.53	11.63	0.40	-	-
DNMG110404FW KC5010 »	9.53	11.63	0.40	4.76	3.81

DNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
DNMG150604UP KC5010 »	12.70	15.50	0.40	6.35	5.16
DNMG150404UP KCU10 »	12.70	15.50	0.40	-	-
DNMG150404UP KC5010 »	12.70	15.50	0.40	4.76	5.16

DNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
DNMG150604MS KCU25 »	12.70	15.50	0.40	6.35	5.16
DNMG150604MS KCU10 »	12.70	15.50	0.40	-	-
DNMG150404MS KCU25 »	12.70	15.50	0.40	4.76	5.16
DNMG150404MS KCU10 »	12.70	15.50	0.40	-	-

DNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
DNMG150604MP KCU10 »	12.70	15.50	0.40	-	-
DNMG150604MP KC5010 »	12.70	15.50	0.40	6.35	5.16
DNMG150404MP KCU10 »	12.70	15.50	0.40	-	-
DNMG150404MP KC5010 »	12.70	15.50	0.40	4.76	5.16

DNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG150604FN KCK05 »	12.70	15.50	0.40	6.35	5.16
DNMG150404FN KCK05 »	12.70	15.50	0.40	4.76	5.16
DNMG110404FN KCK05 »	9.53	11.63	0.40	4.76	3.81

DNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
DNMG150604FF KCU10 »	12.70	15.50	0.40
DNMG150404FF KCU10 »	12.70	15.50	0.40
DNMG110404FF KCU10 »	9.53	11.63	0.40

DNMG-CT

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNMG150404CT KCU10 »	12.70	15.50	0.40	-	-
DNMG150404CT KC5010 »	12.70	15.50	0.40	4.76	5.16
DNMG110404CT KC5010 »	9.53	11.63	0.40	4.76	3.81

DNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGP150604 KCU10 »	12.70	15.50	0.40	-	-
DNGP150604 KC5010 »	12.70	15.50	0.40	6.35	5.16
DNGP150404 KCU10 »	12.70	15.50	0.40	-	-
DNGP150404 KC5010 »	12.70	15.50	0.40	4.76	5.16

DNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGG150604FS KCU25 »	12.70	15.50	0.40	6.35	5.16
DNGG150404FS KCU25 »	12.70	15.50	0.40	4.76	5.16

DNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
DNGG150404LF KCU10 »	12.70	15.50	0.40	-	-
DNGG150404LF KC5010 »	12.70	15.50	0.40	4.76	5.16

CNMG-UN

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
CNMG120404UN KCK20 »	12.70	12.90	0.40	4.76	5.16
CNMG120404UN KCK15B »	12.70	12.90	0.40	4.76	5.16
CNMG120404UN KCK15 »	12.70	12.90	0.40	4.76	5.16
CNMG120404UN KCK05 »	12.70	12.90	0.40	4.76	5.16

CNMG-RP

Negative ISO insert for Rough Positive machining.

Product Code	D	L10	Rε	S	D1
CNMG120404RP KCU25 »	12.70	12.90	0.40	4.76	5.16
CNMG120404RP KCU10 »	12.70	12.90	0.40	-	-
CNMG120404RP KCK20 »	12.70	12.90	0.40	4.76	5.16

CNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG120404MS KCU25 »	12.70	12.90	0.40	4.76	5.16
CNMG120404MS KCU10 »	12.70	12.90	0.40	-	-

CNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
CNMG120404MP KCU10 »	12.70	12.90	0.40	-	-
CNMG120404MP KC5010 »	12.70	12.90	0.40	4.76	5.16

CNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120404FW KCU10 »	12.70	12.90	0.40	-	-
CNMG120404FW KC5010 »	12.70	12.90	0.40	4.76	5.16

CNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120404FP KCU10 »	12.70	12.90	0.40	-	-
CNMG120404FP KC5010 »	12.70	12.90	0.40	4.76	5.16

CNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120404FN KCK05 »	12.70	12.90	0.40	4.76	5.16
CNMG090304FN KCK05 »	9.53	9.67	0.40	3.18	3.81

CNMG-FF

Negative ISO insert for Fine Finishing machining.

Product Code	D	L10	Rε	S	D1
CNMG120404FF KCU10 »	12.70	12.90	0.40	-	-
CNMG120404FF KC5010 »	12.70	12.90	0.40	4.76	5.16
CNMG090304FF KCU10 »	9.53	9.67	0.40	-	-
CNMG090304FF KC5010 »	9.53	9.67	0.40	3.18	3.81

CNMA

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
CNMA120404 KCK20 »	12.70	12.90	0.40	4.76	5.16
CNMA120404 KCK15B »	12.70	12.90	0.40	4.76	5.16
CNMA120404 KCK15 »	12.70	12.90	0.40	4.76	5.16
CNMA120404 KCK05 »	12.70	12.90	0.40	4.76	5.16

CNGP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε
CNGP120404 KCU10 »	12.70	12.90	0.40

CNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNGG120404LF KCU10 »	12.70	12.90	0.40	-	-
CNGG120404LF KC5010 »	12.70	12.90	0.40	4.76	5.16

CNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
CNGG120404FS KCU25 »	12.70	12.90	0.40	4.76	5.16