GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 561 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction

  1. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408FS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNGG-FS

  2. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408LF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KCU10 » 12.70 12.90 0.80 - -
    CNGG160608LF KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNGG160608LF KCU10 » 15.88 16.12 0.80 - -
    CNGG-LF

  3. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CNGP120408 KCU10 » 12.70 12.90 0.80
    CNGP

  4. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090308FF KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FF KCP10 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FF KCU10 » 9.53 9.67 0.80 - -
    CNMG120408FF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FF KCU10 » 12.70 12.90 0.80 - -
    CNMG120408FF KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG-FF

  5. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090308FN KCP10 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FN KT315 » 9.53 9.67 0.80 3.18 3.81
    CNMG120408FN KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG-FN

  6. CNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090308MN KCP10 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MN KCP10B » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MN KCP25 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MN KCP25B » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MN KCP30 » 9.53 9.67 0.80 3.18 3.81
    CNMG120408MN KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP30 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MN KCP40 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608MN KCP10 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MN KCP10B » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MN KCP25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MN KCP25B » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MN KCP30 » 15.88 16.12 0.80 6.35 6.35
    CNMG190608MN KCP10 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MN KCP25 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MN KCP25B » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MN KCP30 » 19.05 19.34 0.80 6.35 7.93
    CNMG-MN

  7. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG090308MP KC5010 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308MP KCU10 » 9.53 9.67 0.80 - -
    CNMG120408MP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MP KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608MP KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608MP KCU10 » 15.88 16.12 0.80 - -
    CNMG190608MP KC5010 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608MP KCU10 » 19.05 19.34 0.80 - -
    CNMG-MP

  8. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG-CT

  9. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG-FP

  10. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408FW KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FW KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FW KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FW KCU10 » 12.70 12.90 0.80 - -
    CNMG120408FW KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG-FW

  11. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120408MS KCU10 » 12.70 12.90 0.80 - -
    CNMG120408MS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608MS KCU10 » 15.88 16.12 0.80 - -
    CNMG160608MS KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG190608MS KCU10 » 19.05 19.34 0.80 - -
    CNMG190608MS KCU25 » 19.05 19.34 0.80 6.35 7.93
    CNMG-MS

  12. CNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120408MW KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MW KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MW KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MW KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408MW KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG-MW

  13. CNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120408RN KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP30 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RN KCP40 » 12.70 12.90 0.80 4.76 5.16
    CNMG160608RN KCP10 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RN KCP10B » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RN KCP25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RN KCP25B » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RN KCP30 » 15.88 16.12 0.80 6.35 6.35
    CNMG190608RN KCP10 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608RN KCP10B » 19.05 19.34 0.80 6.35 7.93
    CNMG190608RN KCP25 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608RN KCP25B » 19.05 19.34 0.80 6.35 7.93
    CNMG190608RN KCP40 » 19.05 19.34 0.80 6.35 7.93
    CNMG-RN

  14. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120408RP KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP30 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCP40 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408RP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408RP KCU25 » 12.70 12.90 0.80 - -
    CNMG160608RP KCP10 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RP KCP25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RP KCP25B » 15.88 16.12 0.80 6.35 6.35
    CNMG160608RP KCU10 » 15.88 16.12 0.80 - -
    CNMG160608RP KCU25 » 15.88 16.12 0.80 6.35 6.35
    CNMG-RP

  15. CNMG

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG190608 KCP25 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608 KCP40 » 19.05 19.34 0.80 6.35 7.93
    CNMG

  16. CNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    CNMM120408RM KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RM KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RM KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RM KCP30 » 12.70 12.90 0.80 4.76 5.16
    CNMM-RM

  17. CNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    CNMM120408RP KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP30 » 12.70 12.90 0.80 4.76 5.16
    CNMM120408RP KCP40 » 12.70 12.90 0.80 4.76 5.16
    CNMM160608RP KCP25 » 15.88 16.12 0.80 6.35 6.35
    CNMM160608RP KCP25B » 15.88 16.12 0.80 6.35 6.35
    CNMM160608RP KCP40 » 15.88 16.12 0.80 6.35 6.35
    CNMM-RP

  18. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG-FS

  19. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  20. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP

  21. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG-CT

  22. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FF KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCU10 » 9.53 11.63 0.80 - -
    DNMG110408FF KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408FF KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150408FF KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608FF KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150608FF KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FF

  23. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408FN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608FN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FN

  24. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FW KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG-FW

  25. DNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP30 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408MN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP40 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MN KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MN

  26. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCU10 » 9.53 11.63 0.80 - -
    DNMG150408MP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MP

  27. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG110408MS KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MS KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150408MS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG-MS

  28. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408RP KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408RP KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCP40 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG-RP

  29. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG-UP

  30. DNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150408RN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RN KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608RN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP30 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RN KCP40 » 12.70 15.50 0.80 6.35 5.16
    DNMG-RN

Items 1 to 250 of 561 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. ISO Insert Range: Beyond Premium Remove This Item
  2. Material Machining: Steel Remove This Item
  3. Insert Type: Negative Remove This Item
  4. Radius°: 0.80 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (561)
Material Machining
  1. Stainless Steel (255)
  2. Cast Iron (268)
  3. Aluminium (17)
  4. HRSA (184)
  5. Universal (145)
Insert Type
  1. Positive (461)
Type of Cut
  1. Fine Finishing (9)
  2. Finishing (160)
  3. Wiper Finishing (30)
  4. Medium (145)
  5. Wiper Medium (19)
  6. Rough Positive (14)
  7. Rough (149)
  8. Rough Single Sided (35)
Tip Style
  1. CNGG (5)
  2. CNGP (1)
  3. CNMG (111)
  4. CNMM (13)
  5. DNGG (3)
  6. DNGP (4)
  7. DNMG (128)
  8. DNMM (7)
  9. SNGG (5)
  10. SNGP (1)
  11. SNMG (46)
  12. SNMM (4)
  13. TNGG (3)
  14. TNGP (1)
  15. TNMG (87)
  16. TNMM (11)
  17. VNGG (5)
  18. VNGP (1)
  19. VNMG (38)
  20. VNMP (2)
  21. WNGG (2)
  22. WNMG (83)
Radius°
  1. 0.10 (14)
  2. 0.20 (28)
  3. 0.34 (2)
  4. 0.40 (286)
  5. 0.74 (6)
  6. 1.14 (7)
  7. 1.20 (492)
  8. 1.60 (221)
  9. 2.40 (80)
  10. 3.20 (5)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...