GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1001 to 1250 of 1617 total

per page
Page:
  2. 3
  3. 4
  4. 5
  5. 6
  6. 7

Set Ascending Direction

  1. DNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150408RN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG-RN

  2. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150408MS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150408MS K313 » 12.70 15.50 0.80 4.76 5.16
    DNMG110408MS KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MS KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MS K313 » 9.53 11.63 0.80 4.76 3.81
    DNMG-MS

  3. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150408MP KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG110408MP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-MP

  4. DNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150408MN KCP40 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP30 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG110408MN KCP30 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG-MN

  5. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150408FN KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMG110408FN KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG-FN

  6. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150408FF KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150408FF KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG110408FF KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCU10 » 9.53 11.63 0.80 - -
    DNMG110408FF KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG-FF

  7. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150408CT KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG110408CT KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-CT

  8. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408UP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-UP

  9. DNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UN KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK15B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG-UN

  10. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMG-RP

  11. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FW KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FW KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-FW

  12. DNMA

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMA150608 KCK20 » 12.70 15.50 0.80 6.35 5.16
    DNMA150608 KCK15B » 12.70 15.50 0.80 6.35 5.16
    DNMA150608 KCK15 » 12.70 15.50 0.80 6.35 5.16
    DNMA150608 KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMA150408 KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMA150408 KCK15B » 12.70 15.50 0.80 4.76 5.16
    DNMA150408 KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMA150408 KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMA110408 KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMA110408 KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMA

  13. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 KC5410 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 K313 » 12.70 15.50 0.80 6.35 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150408 KC5410 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 K313 » 12.70 15.50 0.80 4.76 5.16
    DNGP

  14. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150608FS KC5510 » 12.70 15.50 0.80 6.35 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408FS KC5525 » 12.70 15.50 0.80 4.76 5.16
    DNGG-FS

  15. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG-LF

  16. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150408LF KCP25B » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCP10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCK20 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408LF KCK05 » 12.70 15.50 0.80 4.76 5.50
    DCMT11T308LF KT315 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DCMT11T308LF KCP30 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP25B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP10B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCP05 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCM35 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCK20 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCK15B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCK15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF KCK05 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308LF K313 » 9.53 11.63 0.80 3.97 4.40
    DCMT-LF

  17. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150408FP KCU10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP10 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCP05 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCM25 » 12.70 15.50 0.80 4.76 5.50
    DCMT150408FP KCK20 » 12.70 15.50 0.80 4.76 5.50
    DCMT11T308FP KTP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCP10B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCP05 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCM15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FP KCK20 » 9.53 11.63 0.80 3.97 4.40
    DCMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DCMT070208FP KCP25B » 6.35 7.75 0.80 2.38 2.80
    DCMT070208FP KCP25 » 6.35 7.75 0.80 2.38 2.80
    DCMT070208FP KCP05 » 6.35 7.75 0.80 2.38 2.80
    DCMT070208FP KCM25 » 6.35 7.75 0.80 2.38 2.80
    DCMT-FP

  18. DCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T308UF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308UF KCP10B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308UF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308UF KCP05 » 9.53 11.63 0.80 3.97 4.40
    DCMT-UF

  19. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T308MW KT315 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MW KCU10 » 9.53 11.63 0.80 - -
    DCMT11T308MW KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MW KCK20 » 9.53 11.63 0.80 3.97 4.40
    DCMT-MW

  20. DCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T308MP KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MP KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MP KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MP KCM15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MP KCK20 » 9.53 11.63 0.80 3.97 4.40
    DCMT-MP

  21. DCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T308MF KCP30 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCP25B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCP10B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCM35 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCK20 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCK15B » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308MF KCK15 » 9.53 11.63 0.80 3.97 4.40
    DCMT-MF

  22. DCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T308FW KT315 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FW KCU10 » 9.53 11.63 0.80 - -
    DCMT11T308FW KCP25 » 9.53 11.63 0.80 3.97 4.40
    DCMT11T308FW KCK20 » 9.53 11.63 0.80 3.97 4.40
    DCMT-FW

  23. DCMT

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T30811 KT325 » 9.53 11.63 0.80 - -
    DCMT11T30811 KT315 » 9.53 11.63 0.80 3.97 4.40
    DCMT

  24. DCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DCGT150408LF KCU10 » 12.70 15.50 0.80
    DCGT-LF

  25. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DCGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DCGT11T308HP KC5410 » 9.53 11.63 0.80 3.97 4.40
    DCGT11T308HP K313 » 9.53 11.63 0.80 3.97 4.40
    DCGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DCGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DCGT070208HP KC5410 » 6.35 7.75 0.80 2.38 2.80
    DCGT-HP

  26. CPMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    CPMT09T308MW KT315 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308MW KCU10 » 9.53 9.67 0.80 - -
    CPMT09T308MW KCP25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308MW KCK20 » 9.53 9.67 0.80 3.97 4.40
    CPMT-MW

  27. CPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CPMT09T308MP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308MP KCP25B » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308MP KCP25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308MP KCP10 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308MP KCM25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308MP KCM15 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308MP KCK20 » 9.53 9.67 0.80 3.97 4.40
    CPMT060208MP KCU10 » 6.35 6.45 0.80 2.38 2.80
    CPMT060208MP KCP25B » 6.35 6.45 0.80 2.38 2.80
    CPMT060208MP KCP25 » 6.35 6.45 0.80 2.38 2.80
    CPMT060208MP KCP10 » 6.35 6.45 0.80 2.38 2.80
    CPMT-MP

  28. CPMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε W S D1  
    CPMT09T308MF KCPK30 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCP30 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCP25B » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCP25 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCP10B » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCP10 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCM35 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCM25 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCM15 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCK20 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCK15B » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT09T308MF KCK15 » 9.53 9.67 0.80 9.53 3.97 4.40
    CPMT060208MF KCP25B » 6.35 6.45 0.80 6.35 2.38 2.80
    CPMT060208MF KCP25 » 6.35 6.45 0.80 6.35 2.38 2.80
    CPMT060208MF KCP10 » 6.35 6.45 0.80 6.35 2.38 2.80
    CPMT060208MF KCM25 » 6.35 6.45 0.80 6.35 2.38 2.80
    CPMT060208MF KCM15 » 6.35 6.45 0.80 6.35 2.38 2.80
    CPMT060208MF KCK20 » 6.35 6.45 0.80 6.35 2.38 2.80
    CPMT-MF

  29. CPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T308LF KT315 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCP30 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCP25B » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCP25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCP10B » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCP10 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCP05 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCM25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCM15 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCK20 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCK15B » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCK15 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF KCK05 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308LF K313 » 9.53 9.67 0.80 3.97 4.40
    CPMT060208LF KT315 » 6.35 6.45 0.80 2.38 2.80
    CPMT060208LF KCP30 » 6.35 6.45 0.80 2.38 2.80
    CPMT-LF

  30. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T308FW KT315 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FW KCU10 » 9.53 9.67 0.80 - -
    CPMT09T308FW KCP25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FW KCK20 » 9.53 9.67 0.80 3.97 4.40
    CPMT-FW

  31. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T308FP KTP10 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCU25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCU10 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCP25B » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCP25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCP10B » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCP10 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCM25 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCM15 » 9.53 9.67 0.80 3.97 4.40
    CPMT09T308FP KCK20 » 9.53 9.67 0.80 3.97 4.40
    CPMT-FP

Items 1001 to 1250 of 1617 total

per page
Page:
  2. 3
  3. 4
  4. 5
  5. 6
  6. 7

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Radius°: 0.80 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (1617)
ISO Insert Range
  1. Beyond Premium (1617)
Material Machining
  1. Steel (1022)
  2. Stainless Steel (521)
  3. Cast Iron (560)
  4. Aluminium (40)
  5. HRSA (336)
  6. Universal (287)
Insert Type
  1. Negative (850)
  2. Positive (767)
Type of Cut
  1. Fine Finishing (9)
  2. Finishing (759)
  3. Wiper Finishing (52)
  4. Medium (417)
  5. Wiper Medium (34)
  6. Medium Roughing (2)
  7. Rough Positive (24)
  8. Rough (280)
  9. Rough Single Sided (40)
Tip Style
  1. CCGT (13)
  2. CCMT (123)
  3. CCMW (2)
  4. CNGG (7)
  5. CNGP (4)
  6. CNMA (7)
  7. CNMG (156)
  8. CNMM (15)
  9. CPGH (7)
  10. CPGT (10)
  11. CPMT (85)
  12. DCGT (8)
  13. DCMT (72)
  14. DNGG (5)
  15. DNGP (8)
  16. DNMA (8)
  17. DNMG (176)
  18. DNMM (8)
  19. DNMS (2)
  20. DPGT (11)
  21. DPMT (35)
  22. SCMT (81)
  23. SCMW (2)
  24. SNGG (5)
  25. SNGP (2)
  26. SNMA (4)
  27. SNMG (71)
  28. SNMM (5)
  29. SNMS (2)
  30. SPGT (2)
  31. SPMT (39)
  32. TCGT (8)
  33. TCMT (97)
  34. TCMW (1)
  35. TDHB (3)
  36. TNGG (5)
  37. TNGP (2)
  38. TNMA (8)
  39. TNMG (123)
  40. TNMM (12)
  41. TNMP (5)
  42. TNMS (3)
  43. TPCB (3)
  44. TPCG (1)
  45. TPGH (4)
  46. TPGT (12)
  47. TPMT (77)
  48. VBGT (5)
  49. VBMT (48)
  50. VNGG (8)
  51. VNGP (2)
  52. VNMG (54)
  53. VNMP (4)
  54. VNMS (5)
  55. WCMT (5)
  56. WNGG (2)
  57. WNMA (8)
  58. WNMG (117)
  59. WPMT (13)
Radius°
  1. 0.05 (12)
  2. 0.10 (64)
  3. 0.20 (261)
  4. 0.34 (2)
  5. 0.40 (1131)
  6. 0.74 (6)
  7. 1.14 (7)
  8. 1.20 (899)
  9. 1.60 (360)
  10. 2.40 (87)
  11. 3.20 (6)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...