GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 751 to 1000 of 1512 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Set Ascending Direction

  1. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T304FP KCM25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCM15 » 9.53 9.53 0.40 3.97 4.40
    SCMT-FP

  2. RCMT-RP

    Positive ISO insert for Rough machining.

    Product Code D S D1  
    RCMT2006M0RP KCM25 » 20.00 6.35 6.50
    RCMT-RP

  3. RCMT

    Positive ISO insert for Medium machining.

    Product Code D S D1  
    RCMT2006M0 KCM25 » 20.00 6.35 6.50
    RCMT1605M0 KCU10 » 16.00 - -
    RCMT1605M0 KCM25 » 16.00 5.56 5.50
    RCMT1204M0 KCU10 » 12.00 - -
    RCMT1204M0 KCM25 » 12.00 4.76 4.40
    RCMT120400 KCM25 » 12.70 4.76 5.50
    RCMT10T3M0 KCU10 » 10.00 - -
    RCMT10T3M0 KCM25 » 10.00 3.97 4.40
    RCMT09T300 KCU10 » 9.53 - -
    RCMT09T300 KCM25 » 9.53 3.97 4.40
    RCMT0803M0 KCU10 » 8.00 - -
    RCMT0803M0 KCM25 » 8.00 3.18 3.40
    RCMT0602M0 KCU10 » 6.00 - -
    RCMT0602M0 KCM25 » 6.00 2.38 2.80
    RCMT060200 KCU10 » 6.35 - -
    RCMT060200 KCM25 » 6.35 2.38 2.80
    RCMT

  4. RCGX-ELF

    Negative ISO insert for Medium machining.

    Product Code  
    RCGX190600ELF KCU10 »
    RCGX-ELF

  5. RCGT-MS

    Positive ISO insert for Medium machining.

    Product Code D S D1  
    RCGT1606M0MS KCU25 » - 6.35 5.50
    RCGT1606M0MS KCU10 » - 6.35 5.50
    RCGT1204M0MS KCU25 » 12.00 4.76 4.40
    RCGT1204M0MS KCU10 » 12.00 4.76 4.40
    RCGT0803M0MS KCU25 » 8.00 3.18 3.40
    RCGT0803M0MS KCU10 » 8.00 3.18 3.40
    RCGT-MS

  6. RCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D S D1  
    RCGT1204M0HP KCU25 » 12.00 4.76 4.40
    RCGT1204M0HP KCU10 » 12.00 4.76 4.40
    RCGT10T3M0HP KCU25 » 10.00 3.97 4.40
    RCGT10T3M0HP KCU10 » 10.00 3.97 4.40
    RCGT0803M0HP KCU25 » 8.00 3.18 3.40
    RCGT0803M0HP KCU10 » 8.00 3.18 3.40
    RCGT-HP

  7. RCGH

    Positive ISO insert for Medium machining.

    Product Code D  
    RCGH120400 KCU10 » 12.70
    RCGH

  8. DPMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DPMT11T308MP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT-MP

  9. DPMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DPMT11T308MF KCM35 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308MF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DPMT-MF

  10. DPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T308LF KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCM15 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T304LF KCM25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCM15 » 9.53 11.63 0.40 3.97 4.40
    DPMT070204LF KCM25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCM15 » 6.35 7.75 0.40 2.38 2.80
    DPMT-LF

  11. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCM25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCM25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCM15 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T302FP KCU25 » 9.53 11.63 0.20 3.97 4.40
    DPMT11T302FP KCU10 » 9.53 11.63 0.20 3.97 4.40
    DPMT070208FP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DPMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCM25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCM15 » 6.35 7.75 0.40 2.38 2.80
    DPMT070202FP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DPMT070202FP KCU10 » 6.35 7.75 0.20 2.38 2.80
    DPMT-FP

  12. DPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070208FW KCU10 » 6.35 7.75 0.80 - -
    DPMT070208FW KC5010 » 6.35 7.75 0.80 2.38 2.80
    DPMT070204FW KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPMT-FW

  13. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308LF KCU10 » 9.53 11.63 0.80 - -
    DPGT11T308LF KC5025 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308LF KC5010 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T304LF KCU10 » 9.53 11.63 0.40 - -
    DPGT11T304LF KC5025 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KC5010 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T302LF KCU10 » 9.53 11.63 0.20 - -
    DPGT11T302LF KC5025 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T302LF KC5010 » 9.53 11.63 0.20 3.97 4.40
    DPGT11T301LF KCU10 » 9.53 11.63 0.10 - -
    DPGT11T301LF KC5025 » 9.53 11.63 0.10 3.97 4.40
    DPGT11T301LF KC5010 » 9.53 11.63 0.10 3.97 4.40
    DPGT070204LF KCU10 » 6.35 7.75 0.40 - -
    DPGT070204LF KC5025 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPGT070202LF KCU10 » 6.35 7.75 0.20 - -
    DPGT070202LF KC5025 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202LF KC5010 » 6.35 7.75 0.20 2.38 2.80
    DPGT070201LF KCU10 » 6.35 7.75 0.10 - -
    DPGT070201LF KC5025 » 6.35 7.75 0.10 2.38 2.80
    DPGT070201LF KC5010 » 6.35 7.75 0.10 2.38 2.80
    DPGT-LF

  14. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T308HP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPGT11T308HP KCU10 » 9.53 11.63 0.80 - -
    DPGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DPGT070208HP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPGT070208HP KCU10 » 6.35 7.75 0.80 - -
    DPGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DPGT070202HP KCU25 » 6.35 7.75 0.20 2.38 2.80
    DPGT070202HP KCU10 » 6.35 7.75 0.20 - -
    DPGT-HP

  15. DNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    DNMM150612RP KCM25 » 12.70 15.50 1.20 6.35 5.16
    DNMM150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMM-RP

  16. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150612UP KCM35 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612UP KCM25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612UP KCM15 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612UP KC5010 » 12.70 15.50 1.20 6.35 5.16
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608UP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150604UP KCM25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604UP KCM15 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604UP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150412UP KCU10 » 12.70 15.50 1.20 - -
    DNMG150412UP KCM35 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCM25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCM15 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150408UP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150404UP KCU10 » 12.70 15.50 0.40 - -
    DNMG150404UP KCM25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCM15 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110412UP KCM25 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UP KCM15 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UP KC5010 » 9.53 11.63 1.20 4.76 3.81
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408UP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-UP

  17. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150612RP KCU10 » 12.70 15.50 1.20 - -
    DNMG150612RP KCM35 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCM25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCM15 » 12.70 15.50 1.20 6.35 5.16
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608RP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150416RP KCU10 » 12.70 15.50 1.60 - -
    DNMG150412RP KCU10 » 12.70 15.50 1.20 - -
    DNMG150412RP KCM35 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCM25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150408RP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG110412RP KCM15 » 9.53 11.63 1.20 4.76 3.81
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG-RP

  18. DNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150612MW KC9125 » 12.70 15.50 1.20 6.35 5.16
    DNMG150608MW KC9225 » 12.70 15.50 0.41 6.35 5.16
    DNMG-MW

  19. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150612MS KCU25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MS KCU10 » 12.70 15.50 1.20 - -
    DNMG150608MS KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150604MS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150412MS KCU25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MS KCU10 » 12.70 15.50 1.20 - -
    DNMG150408MS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MS KCU10 » 12.70 15.50 0.80 - -
    DNMG150404MS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150402MS KCU25 » 12.70 15.50 0.20 4.76 5.16
    DNMG150402MS KCU10 » 12.70 15.50 0.20 - -
    DNMG150401MS KCU10 » 12.70 15.50 0.10 - -
    DNMG110408MS KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MS KCU10 » 9.53 11.63 0.80 - -
    DNMG-MS

  20. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150612MP KCU25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MP KCU10 » 12.70 15.50 1.20 - -
    DNMG150612MP KCM25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MP KCM15 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612MP KC5010 » 12.70 15.50 1.20 6.35 5.16
    DNMG150608MP KCU25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCU10 » 12.70 15.50 0.80 - -
    DNMG150608MP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608MP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150604MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MP KCM35 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCM25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KCM15 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150412MP KCU10 » 12.70 15.50 1.20 - -
    DNMG150412MP KCM25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MP KCM15 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412MP KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150408MP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408MP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150404MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150404MP KCM35 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCM25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KCM15 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110412MP KCM25 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412MP KCM15 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412MP KC5010 » 9.53 11.63 1.20 4.76 3.81
    DNMG110408MP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408MP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408MP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG-MP

  21. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150612CT KCU10 » 12.70 15.50 1.14 - -
    DNMG150612CT KC5010 » 12.70 15.50 1.14 6.35 5.16
    DNMG150608CT KCU10 » 12.70 15.50 0.74 - -
    DNMG150608CT KC5010 » 12.70 15.50 0.74 6.35 5.16
    DNMG150604CT KC5010 » 12.70 15.50 0.34 6.35 5.16
    DNMG150412CT KCU10 » 12.70 15.50 1.20 - -
    DNMG150412CT KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG-CT

  22. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150608FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150608FW KC5010 » 12.70 15.50 0.41 6.35 5.16
    DNMG150604FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FW KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150408FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150408FW KC5010 » 12.70 15.50 0.41 4.76 5.16
    DNMG150404FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FW KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110408FW KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110404FW KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FW KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG-FW

  23. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG150608FF KCU10 » 12.70 15.50 0.80
    DNMG150604FF KCU10 » 12.70 15.50 0.40
    DNMG150408FF KCU10 » 12.70 15.50 0.80
    DNMG150404FF KCU10 » 12.70 15.50 0.40
    DNMG110408FF KCU10 » 9.53 11.63 0.80
    DNMG110404FF KCU10 » 9.53 11.63 0.40
    DNMG-FF

  24. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150402 KCU10 » 12.70 15.50 0.20 - -
    DNGP150402 KC5010 » 12.70 15.50 0.20 4.76 5.16
    DNGP150401 KCU10 » 12.70 15.50 0.10 - -
    DNGP150401 KC5010 » 12.70 15.50 0.10 4.76 5.16
    DNGP

  25. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG-FS

  26. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG-LF

Items 751 to 1000 of 1512 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Stainless Steel Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (1512)
ISO Insert Range
  1. Beyond Premium (1512)
Material Machining
  1. Steel (3005)
  2. Cast Iron (1598)
  3. Aluminium (127)
  4. HRSA (1132)
  5. Universal (920)
Insert Type
  1. Negative (726)
  2. Positive (786)
Type of Cut
  1. Fine Finishing (8)
  2. Finishing (832)
  3. Wiper Finishing (41)
  4. Medium (354)
  5. Wiper Medium (11)
  6. Rough Positive (39)
  7. Rough (195)
  8. Rough Single Sided (32)
Tip Style
  1. CCGT (30)
  2. CCMT (85)
  3. CDG (6)
  4. CDHBS (12)
  5. CDHHS (16)
  6. CDT (2)
  7. CNGG (17)
  8. CNGP (4)
  9. CNMG (163)
  10. CNMM (17)
  11. CPG (2)
  12. CPGH (15)
  13. CPGT (20)
  14. CPMT (53)
  15. DCGT (15)
  16. DCMT (48)
  17. DNGG (11)
  18. DNGP (12)
  19. DNMG (138)
  20. DNMM (2)
  21. DPGT (31)
  22. DPMT (30)
  23. RCGH (1)
  24. RCGT (12)
  25. RCGX (1)
  26. RCMT (17)
  27. SCMT (47)
  28. SNGG (7)
  29. SNGP (2)
  30. SNMG (71)
  31. SNMM (9)
  32. SPGT (2)
  33. SPMT (12)
  34. TCGT (17)
  35. TCMT (82)
  36. TDHB (15)
  37. TDHH (14)
  38. TNGG (6)
  39. TNGP (2)
  40. TNMG (100)
  41. TNMM (4)
  42. TPCB (10)
  43. TPCG (7)
  44. TPCH (4)
  45. TPGH (10)
  46. TPGT (29)
  47. TPMT (49)
  48. VBGT (25)
  49. VBMT (36)
  50. VNGG (12)
  51. VNGP (4)
  52. VNMG (48)
  53. WCMT (7)
  54. WNGG (8)
  55. WNMG (88)
  56. WPGT (3)
  57. WPGTS (4)
  58. WPMT (15)
  59. WPMTS (3)
Radius°
  1. 0.05 (8)
  2. 0.10 (38)
  3. 0.20 (153)
  4. 0.34 (1)
  5. 0.40 (426)
  6. 0.74 (2)
  7. 0.80 (521)
  8. 1.14 (2)
  9. 1.20 (235)
  10. 1.60 (62)
  11. 2.40 (7)
  12. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...