GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 501 to 750 of 766 total

per page
Page:
  2. 1
  3. 2
  4. 3
  5. 4

Set Ascending Direction

  1. DCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T304UF KCP05 » 9.53 11.63 0.40 3.97 4.40
    DCMT070204UF KCP25 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204UF KCP10 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204UF KCP05 » 6.35 7.75 0.40 2.38 2.80
    DCMT-UF

  2. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T304MW KCU10 » 9.53 11.63 0.40 - -
    DCMT11T304MW KCP25 » 9.53 11.63 0.40 3.97 4.40
    DCMT-MW

  3. DCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T304MP KCP25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304MP KCP10 » 9.53 11.63 0.40 3.97 4.40
    DCMT-MP

  4. DCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DCMT11T304MF KCP30 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304MF KCP25B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304MF KCP25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304MF KCP10B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304MF KCP10 » 9.53 11.63 0.40 3.97 4.40
    DCMT-MF

  5. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T304LF KT315 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP30 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP25B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP10B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304LF KCP05 » 9.53 11.63 0.40 3.97 4.40
    DCMT070204LF KT315 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204LF KCP30 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204LF KCP25B » 6.35 7.75 0.40 2.38 2.80
    DCMT070204LF KCP25 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204LF KCP10B » 6.35 7.75 0.40 2.38 2.80
    DCMT070204LF KCP10 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204LF KCP05 » 6.35 7.75 0.40 2.38 2.80
    DCMT-LF

  6. DCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T304FW KT315 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FW KCU10 » 9.53 11.63 0.40 - -
    DCMT11T304FW KCP25 » 9.53 11.63 0.40 3.97 4.40
    DCMT-FW

  7. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T304FP KTP10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCP25B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCP25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCP10B » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCP10 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCP05 » 9.53 11.63 0.40 3.97 4.40
    DCMT070204FP KTP10 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCP25 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCP10 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCP05 » 6.35 7.75 0.40 2.38 2.80
    DCMT-FP

  8. DCMT

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T30411 KT325 » 9.53 11.63 0.40 - -
    DCMT11T30411 KT315 » 9.53 11.63 0.40 3.97 4.40
    DCMT07020411 KT325 » 6.35 7.75 0.40 - -
    DCMT07020411 KT315 » 6.35 7.75 0.40 2.38 2.80
    DCMT

  9. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DCGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DCGT-HP

  10. CPMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T304UF KCP25B » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304UF KCP25 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304UF KCP10B » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304UF KCP10 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304UF KCP05 » 9.53 9.67 0.40 3.97 4.40
    CPMT060204UF KCP25B » 6.35 6.45 0.40 2.38 2.80
    CPMT060204UF KCP25 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204UF KCP10B » 6.35 6.45 0.40 2.38 2.80
    CPMT060204UF KCP10 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204UF KCP05 » 6.35 6.45 0.40 2.38 2.80
    CPMT-UF

  11. CPMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    CPMT09T304MW KCU10 » 9.53 9.67 0.40 - -
    CPMT09T304MW KCP25 » 9.53 9.67 0.40 3.97 4.40
    CPMT-MW

  12. CPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T304LF KT315 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304LF KCP30 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304LF KCP25B » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304LF KCP25 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304LF KCP10B » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304LF KCP10 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304LF KCP05 » 9.53 9.67 0.40 3.97 4.40
    CPMT060204LF KT315 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204LF KCP30 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204LF KCP25B » 6.35 6.45 0.40 2.38 2.80
    CPMT060204LF KCP25 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204LF KCP10B » 6.35 6.45 0.40 2.38 2.80
    CPMT060204LF KCP10 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204LF KCP05 » 6.35 6.45 0.40 2.38 2.80
    CPMT050204LF KT315 » 5.56 5.65 0.40 2.38 2.65
    CPMT-LF

  13. CPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T304FW KT315 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FW KCU10 » 9.53 9.67 0.40 - -
    CPMT09T304FW KCP25 » 9.53 9.67 0.40 3.97 4.40
    CPMT060204FW KT315 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FW KCU10 » 6.35 6.45 0.40 - -
    CPMT060204FW KCP25 » 6.35 6.45 0.40 2.38 2.80
    CPMT-FW

  14. CPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPMT09T304FP KTP10 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCP25B » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCP25 » 9.53 9.67 0.40 3.97 4.40
    CPMT09T304FP KCP10 » 9.53 9.67 0.40 3.97 4.40
    CPMT060204FP KTP10 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCP25B » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCP25 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCP10 » 6.35 6.45 0.40 2.38 2.80
    CPMT060204FP KCP05 » 6.35 6.45 0.40 2.38 2.80
    CPMT050204FP KCU25 » 5.56 5.65 0.40 2.38 2.50
    CPMT050204FP KCU10 » 5.56 5.65 0.40 2.38 2.50
    CPMT050204FP KCP25 » 5.56 5.65 0.40 2.38 2.50
    CPMT050204FP KCP10 » 5.56 5.65 0.40 2.38 2.50
    CPMT-FP

  15. CPMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε W S D1  
    CPMT060204MF KCPK30 » 6.35 6.45 0.40 6.35 2.38 2.80
    CPMT-MF

  16. CPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CPGT09T304LF KCU10 » 9.53 9.67 0.40
    CPGT060204LF KCU10 » 6.35 6.45 0.40
    CPGT-LF

  17. CPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGT09T304HP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGT09T304HP KCU10 » 9.53 9.67 0.40 - -
    CPGT060204HP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CPGT060204HP KCU10 » 6.35 6.45 0.40 - -
    CPGT060204HP KC5025 » 6.35 6.45 0.40 2.38 2.80
    CPGT-HP

  18. CPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CPGH09T304 KT315 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KCU25 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KCU10 » 9.53 9.67 0.40 - -
    CPGH09T304 KC9125 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KC5025 » 9.53 9.67 0.40 3.97 4.40
    CPGH09T304 KC5010 » 9.53 9.67 0.40 3.97 4.40
    CPGH

  19. CNMG-RP

    Negative ISO insert for Rough Positive machining.

    Product Code D L10 Rε S D1  
    CNMG120404RP KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404RP KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404RP KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG-RP

  20. CNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MS KCU10 » 12.70 12.90 0.40 - -
    CNMG-MS

  21. CNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404MP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG-MP

  22. CNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CNMG120404MN KCP30 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404MN KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG090304MN KCP30 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304MN KCP25B » 9.53 9.67 0.40 3.18 3.81
    CNMG090304MN KCP25 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304MN KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG-MN

  23. CNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FW KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FW KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FW KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FW

  24. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FP KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FP KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FP KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG-FP

  25. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FN KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP25B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FN KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG090304FN KT315 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FN KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG-FN

  26. CNMG-FF

    Negative ISO insert for Fine Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120404FF KT315 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCU10 » 12.70 12.90 0.40 - -
    CNMG120404FF KCP10B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCP10 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KCP05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404FF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNMG090304FF KT315 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FF KCU10 » 9.53 9.67 0.40 - -
    CNMG090304FF KCP10 » 9.53 9.67 0.40 3.18 3.81
    CNMG090304FF KC5010 » 9.53 9.67 0.40 3.18 3.81
    CNMG-FF

  27. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    CNGP120404 KCU10 » 12.70 12.90 0.40
    CNGP

  28. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404LF KCU10 » 12.70 12.90 0.40 - -
    CNGG120404LF KC5010 » 12.70 12.90 0.40 4.76 5.16
    CNGG-LF

  29. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120404FS KCU25 » 12.70 12.90 0.40 4.76 5.16
    CNGG-FS

  30. CDHHS-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHHS4T004R KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004R KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004R KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-R

  31. CDHHS-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHHS4T004L KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KCU10 » 3.97 4.03 0.38 - -
    CDHHS4T004L KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHHS4T004L KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHHS-L

  32. CDHBS

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CDHBS4T004 KT315 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KCU25 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KCU10 » 3.97 4.03 0.38 - -
    CDHBS4T004 KC5025 » 3.97 4.03 0.38 1.02 2.13
    CDHBS4T004 KC5010 » 3.97 4.03 0.38 1.02 2.13
    CDHBS

  33. CCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    CCMT120404MW KT315 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404MW KCU10 » 12.70 12.90 0.40 - -
    CCMT120404MW KCP25 » 12.70 12.90 0.40 4.76 5.50
    CCMT09T304MW KT315 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MW KCU10 » 9.53 9.67 0.40 - -
    CCMT09T304MW KCP25 » 9.53 9.67 0.40 3.97 4.40
    CCMT-MW

  34. CCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT120404LF KT315 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404LF KCP30 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404LF KCP25B » 12.70 12.90 0.40 4.76 5.50
    CCMT120404LF KCP25 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404LF KCP10 » 12.70 12.90 0.40 4.76 5.50
    CCMT09T304LF KT315 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304LF KCP30 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304LF KCP25B » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304LF KCP25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304LF KCP10B » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304LF KCP10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304LF KCP05 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204LF KT315 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCP30 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCP25B » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCP25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCP10B » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCP10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204LF KCP05 » 6.35 6.45 0.40 2.38 2.80
    CCMT-LF

  35. CCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT120404FP KCU25 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCU10 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCP25B » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCP25 » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCP10B » 12.70 12.90 0.40 4.76 5.50
    CCMT120404FP KCP10 » 12.70 12.90 0.40 4.76 5.50
    CCMT09T304FP KTP10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCU25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCP25B » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCP25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCP10B » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCP10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FP KCP05 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204FP KTP10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCU25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCP25B » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FP KCP25 » 6.35 6.45 0.40 2.38 2.80
    CCMT-FP

  36. CCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT09T304UF KCP25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304UF KCP10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304UF KCP05 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204UF KCP25B » 6.35 6.45 0.40 2.38 2.80
    CCMT060204UF KCP25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204UF KCP10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204UF KCP05 » 6.35 6.45 0.40 2.38 2.80
    CCMT-UF

  37. CCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT09T304MP KCU10 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MP KCP25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MP KCP10 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204MP KCU10 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MP KCP25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MP KCP10 » 6.35 6.45 0.40 2.38 2.80
    CCMT-MP

  38. CCMT-MF

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    CCMT09T304MF KCP30 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MF KCP25B » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MF KCP25 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MF KCP10B » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304MF KCP10 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204MF KCP30 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MF KCP25B » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MF KCP25 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MF KCP10B » 6.35 6.45 0.40 2.38 2.80
    CCMT060204MF KCP10 » 6.35 6.45 0.40 2.38 2.80
    CCMT-MF

  39. CCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    CCMT09T304FW KT315 » 9.53 9.67 0.40 3.97 4.40
    CCMT09T304FW KCP25 » 9.53 9.67 0.40 3.97 4.40
    CCMT060204FW KT315 » 6.35 6.45 0.40 2.38 2.80
    CCMT060204FW KCP25 » 6.35 6.45 0.40 2.38 2.80
    CCMT-FW

Items 501 to 750 of 766 total

per page
Page:
  2. 1
  3. 2
  4. 3
  5. 4

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Steel Remove This Item
  2. Radius°: 0.40 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (766)
ISO Insert Range
  1. Beyond Premium (766)
Material Machining
  1. Stainless Steel (426)
  2. Cast Iron (409)
  3. Aluminium (37)
  4. HRSA (337)
  5. Universal (281)
Insert Type
  1. Negative (286)
  2. Positive (480)
Type of Cut
  1. Fine Finishing (10)
  2. Finishing (555)
  3. Wiper Finishing (64)
  4. Medium (110)
  5. Wiper Medium (18)
  6. Rough Positive (5)
  7. Rough (4)
Tip Style
  1. CCGT (13)
  2. CCMT (74)
  3. CDHBS (5)
  4. CDHHS (8)
  5. CNGG (3)
  6. CNGP (1)
  7. CNMG (46)
  8. CPGH (6)
  9. CPGT (7)
  10. CPMT (51)
  11. DCGT (4)
  12. DCMT (60)
  13. DNGG (4)
  14. DNGP (4)
  15. DNMG (102)
  16. DPGT (10)
  17. DPMT (30)
  18. SCMT (23)
  19. SNGP (1)
  20. SNMG (18)
  21. SPGT (1)
  22. SPMT (9)
  23. TCGT (6)
  24. TCMT (41)
  25. TDHB (5)
  26. TDHH (8)
  27. TNGG (2)
  28. TNGP (1)
  29. TNMG (43)
  30. TPCB (3)
  31. TPCG (3)
  32. TPCH (1)
  33. TPGH (6)
  34. TPGT (10)
  35. TPMT (35)
  36. VBGT (11)
  37. VBMT (32)
  38. VNGG (3)
  39. VNMG (25)
  40. VNMP (2)
  41. WCMT (5)
  42. WNGG (2)
  43. WNMG (29)
  44. WPMT (9)
  45. WPMTS (4)
Radius°
  1. 0.05 (10)
  2. 0.10 (42)
  3. 0.20 (196)
  4. 0.34 (2)
  5. 0.74 (6)
  6. 0.80 (1022)
  7. 1.14 (7)
  8. 1.20 (550)
  9. 1.60 (221)
  10. 2.40 (80)
  11. 3.20 (5)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...