GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 337 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction

  1. WPMTS-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMTS3T104LF KC5025 » 4.76 3.25 0.40 1.98 2.15
    WPMTS3T104LF KC5010 » 4.76 3.25 0.40 1.98 2.15
    WPMTS-LF

  2. WPMTS-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMTS3T104FP KCU10 » 4.76 3.25 0.40 1.98 2.15
    WPMTS-FP

  3. WPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMT06T304FP KCU10 » 9.53 6.52 0.40 3.97 4.40
    WPMT040204FP KCU10 » 6.35 4.34 0.40 2.38 2.80
    WPMT-FP

  4. WPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WPMT040204LF KC5025 » 6.35 4.34 0.40 2.38 2.90
    WPMT040204LF KC5010 » 6.35 4.34 0.40 2.38 2.90
    WPMT-LF

  5. WNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080404MS KCU25 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404MS K313 » 12.70 8.69 0.40 4.76 5.16
    WNMG-MS

  6. WNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080404FW KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FW KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060404FW KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FW KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FW

  7. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080404FP KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FP KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060404FP KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FP KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FP

  8. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080404FF KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060404FF KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FF KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FF

  9. WNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    WNMG060404MP KCU10 » 9.53 6.52 0.40
    WNMG-MP

  10. WNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080404LF KCU10 » 12.70 8.69 0.40 - -
    WNGG080404LF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNGG-LF

  11. WNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080404FS KC5510 » 12.70 8.69 0.40 4.76 5.16
    WNGG-FS

  12. WCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WCMT040204LF KC5025 » 6.35 4.34 0.40 2.38 2.80
    WCMT040204LF KC5010 » 6.35 4.34 0.40 2.38 2.80
    WCMT-LF

  13. WCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WCMT040204FP KCU25 » 6.35 4.34 0.40 2.38 2.80
    WCMT040204FP KCU10 » 6.35 4.34 0.40 2.38 2.80
    WCMT-FP

  14. VNMS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMS160404 K68 » 9.53 16.61 0.40 4.76 3.81
    VNMS

  15. VNMP-K

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMP160404K K68 » 9.53 16.61 0.40 4.76 3.81
    VNMP-K

  16. VNMP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMP160404 K313 » 9.53 16.61 0.40 4.76 3.81
    VNMP

  17. VNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG220404MS KCU25 » 12.70 22.14 0.40 4.76 5.16
    VNMG220404MS KC5525 » 12.70 22.14 0.40 4.76 5.16
    VNMG160404MS KCU25 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MS KCU10 » 9.53 16.61 0.40 - -
    VNMG160404MS K313 » 9.53 16.61 0.40 4.76 3.81
    VNMG-MS

  18. VNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε  
    VNMG160404UP KCU10 » 9.53 16.61 0.40
    VNMG-UP

  19. VNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160404MP KCU10 » 9.53 16.61 0.40 - -
    VNMG160404MP KC5010 » 9.53 16.61 0.40 4.76 3.81
    VNMG-MP

  20. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNMG160404FP KCU10 » 9.53 16.61 0.40
    VNMG-FP

  21. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNMG160404FF KCU10 » 9.53 16.61 0.40
    VNMG-FF

  22. VNGP-K

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGP160404K K313 » 9.53 16.61 0.40 4.76 3.81
    VNGP-K

  23. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160404LF KCU10 » 9.53 16.61 0.40 - -
    VNGG160404LF KC730 » 9.53 16.61 0.40 4.76 3.81
    VNGG160404LF KC5010 » 9.53 16.61 0.40 4.76 3.81
    VNGG160404LF K313 » 9.53 16.61 0.40 4.76 3.81
    VNGG-LF

  24. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160404FS KCU25 » 9.53 16.61 0.40 4.76 3.81
    VNGG160404FS K313 » 9.53 16.61 0.40 4.76 3.81
    VNGG-FS

  25. VBMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBMT160404LF KC5025 » 9.53 16.61 0.40 4.76 4.40
    VBMT160404LF K313 » 9.53 16.61 0.40 4.76 4.40
    VBMT110304LF KC5025 » 6.35 11.07 0.40 3.18 2.80
    VBMT110304LF K313 » 6.35 11.07 0.40 3.18 2.80
    VBMT-LF

  26. VBMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBMT160404FP KCU25 » 9.53 16.61 0.40 4.76 4.40
    VBMT160404FP KCU10 » 9.53 16.61 0.40 4.76 4.40
    VBMT110304FP KCU25 » 6.35 11.07 0.40 3.18 2.80
    VBMT110304FP KCU10 » 6.35 11.07 0.40 3.18 2.80
    VBMT-FP

  27. VBGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBGT1604X0LF KC5025 » 9.53 16.61 0.04 4.76 4.40
    VBGT160404LF KCU10 » 9.53 16.61 0.40 - -
    VBGT160404LF KC5025 » 9.53 16.61 0.40 4.76 4.40
    VBGT110304LF KCU10 » 6.35 11.07 0.40 - -
    VBGT110304LF KC5025 » 6.35 11.07 0.40 3.18 2.80
    VBGT110304LF K313 » 6.35 11.07 0.40 3.18 2.80
    VBGT-LF

  28. VBGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VBGT160404HP KCU25 » 9.53 16.61 0.40 4.76 4.40
    VBGT160404HP KCU10 » 9.53 16.61 0.40 - -
    VBGT160404HP KC5025 » 9.53 16.61 0.40 4.76 4.40
    VBGT160404HP K313 » 9.53 16.61 0.40 4.76 4.40
    VBGT110304HP KCU25 » 6.35 11.07 0.40 3.18 2.80
    VBGT110304HP KCU10 » 6.35 11.07 0.40 - -
    VBGT110304HP KC5025 » 6.35 11.07 0.40 3.18 2.80
    VBGT-HP

  29. TPMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPMT16T304UF KC5010 » 9.53 16.50 0.40 3.97 4.40
    TPMT110204UF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TPMT-UF

  30. TPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPMT16T304LF KC5025 » 9.53 16.50 0.40 3.97 4.40
    TPMT110204LF KC5025 » 6.35 11.00 0.40 2.38 2.80
    TPMT110204LF K313 » 6.35 11.00 0.40 2.38 2.80
    TPMT090204LF KC5025 » 5.56 9.63 0.40 2.38 2.65
    TPMT090204LF K313 » 5.56 9.63 0.40 2.38 2.65
    TPMT-LF

  31. TPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPMT16T304FP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TPMT110304FP KCU25 » 6.35 11.00 0.40 3.18 2.80
    TPMT110304FP KCU10 » 6.35 11.00 0.40 3.18 2.80
    TPMT110204FP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TPMT110204FP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TPMT090204FP KCU10 » 5.56 9.63 0.40 2.38 2.50
    TPMT-FP

  32. TPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGT16T304LF KCU10 » 9.53 16.50 0.40 - -
    TPGT16T304LF KC5025 » 9.53 16.50 0.40 3.97 4.40
    TPGT110204LF KCU10 » 6.35 11.00 0.40 - -
    TPGT110204LF KC5025 » 6.35 11.00 0.40 2.38 2.80
    TPGT090204LF KCU10 » 5.56 9.63 0.40 - -
    TPGT090204LF KC5025 » 5.56 9.63 0.40 2.38 2.65
    TPGT-LF

  33. TPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGT16T304HP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TPGT16T304HP KCU10 » 9.53 16.50 0.40 - -
    TPGT16T304HP K313 » 9.53 16.50 0.40 3.97 4.40
    TPGT110204HP KCU25 » 6.35 11.00 0.40 2.38 2.90
    TPGT110204HP KCU10 » 6.35 11.00 0.40 - -
    TPGT110204HP K313 » 6.35 11.00 0.40 2.38 2.90
    TPGT-HP

  34. TPGH

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPGH16T304 KCU10 » 9.53 16.50 0.40 - -
    TPGH16T304 KC5010 » 9.53 16.50 0.40 3.97 4.40
    TPGH160304 KCU25 » 9.53 16.50 0.40 3.18 3.33
    TPGH160304 KCU10 » 9.53 16.50 0.40 - -
    TPGH160304 KC5025 » 9.53 16.50 0.40 3.18 3.33
    TPGH160304 KC5010 » 9.53 16.50 0.40 3.18 3.33
    TPGH

  35. TPCH

    Positive ISO insert for Finishing machining.

    Product Code D Rε S D1  
    TPCH110204 KC5010 » 6.50 0.38 2.44 3.30
    TPCH

  36. TPCG-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPCG110204L KCU25 » 6.35 11.00 0.40 2.44 3.30
    TPCG110204L KC5025 » 6.35 11.00 0.40 2.44 3.30
    TPCG110204L KC5010 » 6.35 11.00 0.40 2.44 3.30
    TPCG-L

  37. TPCB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TPCB160304 KCU25 » 9.53 16.50 0.40 3.18 3.18
    TPCB160304 KC5025 » 9.53 16.50 0.40 3.18 3.18
    TPCB160304 KC5010 » 9.53 16.50 0.40 3.18 3.18
    TPCB

  38. TNMP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMP220404 K68 » 12.70 22.00 0.40 4.76 5.16
    TNMP160404 K68 » 9.53 16.50 0.40 4.76 3.81
    TNMP160404 K313 » 9.53 16.50 0.40 4.76 3.81
    TNMP

  39. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG220404MS KCU25 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404MS KCU10 » 12.70 22.00 0.40 - -
    TNMG160404MS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MS KCU10 » 9.53 16.50 0.40 - -
    TNMG160404MS KC5510 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MS K313 » 9.53 16.50 0.40 4.76 3.81
    TNMG-MS

  40. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220404FP KC5010 » 12.70 22.00 0.40 4.76 5.16
    TNMG160404FP KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG-FP

  41. TNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε  
    TNMG160404MP KCU10 » 9.53 16.50 0.40
    TNMG-MP

  42. TNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160404FW KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FW KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG-FW

  43. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160404FF KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FF KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG110304FF KCU10 » 6.35 11.00 0.40 - -
    TNMG110304FF KC5010 » 6.35 11.00 0.40 3.18 2.26
    TNMG-FF

  44. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    TNGP160404 KCU10 » 9.53 16.50 0.40
    TNGP

  45. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG160404FS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNGG160404FS KCU10 » 9.53 16.50 0.40 - -
    TNGG-FS

  46. TDHH-R

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHH07T1204R KCU25 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204R KCU10 » 4.06 7.04 0.38 - -
    TDHH07T1204R KC5025 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204R KC5010 » 4.06 7.04 0.38 1.19 2.39
    TDHH-R

  47. TDHH-L

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHH07T1204L KCU25 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204L KCU10 » 4.06 7.04 0.38 - -
    TDHH07T1204L KC5025 » 4.06 7.04 0.38 1.19 2.39
    TDHH07T1204L KC5010 » 4.06 7.04 0.38 1.19 2.39
    TDHH-L

  48. TDHB

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TDHB07T1204 KCU25 » 4.06 7.04 0.38 1.19 2.39
    TDHB07T1204 KCU10 » 4.06 7.04 0.38 - -
    TDHB07T1204 KC5025 » 4.06 7.04 0.38 1.19 2.39
    TDHB07T1204 KC5010 » 4.06 7.04 0.38 1.19 2.39
    TDHB

  49. TCMT-MP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T304MP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCMT-MP

  50. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T304LF KC5025 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KC5010 » 9.53 16.50 0.40 3.97 4.40
    TCMT110204LF KC5025 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF K68 » 6.35 11.00 0.40 2.38 2.80
    TCMT-LF

  51. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T304FP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCMT110304FP KCU25 » 6.35 11.00 0.40 3.18 2.80
    TCMT110304FP KCU10 » 6.35 11.00 0.40 3.18 2.80
    TCMT110204FP KU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT090204FP KCU25 » 5.56 9.63 0.40 2.38 2.50
    TCMT090204FP KCU10 » 5.56 9.63 0.40 2.38 2.50
    TCMT-FP

  52. TCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110204UF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT-UF

  53. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T304LF KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT110204LF KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT-LF

  54. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T304HP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP K313 » 9.53 16.50 0.40 3.97 4.40
    TCGT110204HP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP K313 » 6.35 11.00 0.40 2.38 2.80
    TCGT-HP

  55. SPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SPMT-FP

  56. SPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SPGT09T304LF KCU10 » 9.53 9.53 0.40
    SPGT-LF

  57. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG-FP

  58. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SNGP120404 KCU10 » 12.70 12.70 0.40
    SNGP

  59. SCMT-MP

    Positive ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    SCMT120404MP KCU10 » 12.70 12.70 0.40 4.76 5.50
    SCMT09T304MP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SCMT-MP

  60. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT120404FP KCU25 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404FP KCU10 » 12.70 12.70 0.40 4.76 5.50
    SCMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SCMT-FP

  61. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DPMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DPMT-FP

  62. DPMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT070204FW KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPMT-FW

  63. DPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T304LF KCU10 » 9.53 11.63 0.40 - -
    DPGT11T304LF KC5025 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304LF KC5010 » 9.53 11.63 0.40 3.97 4.40
    DPGT070204LF KCU10 » 6.35 7.75 0.40 - -
    DPGT070204LF KC5025 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204LF KC5010 » 6.35 7.75 0.40 2.38 2.80
    DPGT-LF

  64. DPGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DPGT11T304HP K313 » 9.53 11.63 0.40 3.97 4.40
    DPGT070204HP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DPGT070204HP KCU10 » 6.35 7.75 0.40 - -
    DPGT070204HP K313 » 6.35 7.75 0.40 2.38 2.80
    DPGT-HP

  65. DNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150608FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150608FW KC5010 » 12.70 15.50 0.41 6.35 5.16
    DNMG150604FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FW KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150408FW KCU10 » 12.70 15.50 0.41 - -
    DNMG150408FW KC5010 » 12.70 15.50 0.41 4.76 5.16
    DNMG150404FW KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FW KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110404FW KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FW KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG-FW

  66. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG150604UP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150404UP KCU10 » 12.70 15.50 0.40 - -
    DNMG150404UP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG-UP

  67. DNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150604MS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MS K313 » 12.70 15.50 0.40 6.35 5.16
    DNMG150404MS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404MS KCU10 » 12.70 15.50 0.40 - -
    DNMG150404MS K313 » 12.70 15.50 0.40 4.76 5.16
    DNMG-MS

  68. DNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    DNMG150604MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150604MP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150404MP KCU10 » 12.70 15.50 0.40 - -
    DNMG150404MP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG-MP

  69. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    DNMG150604FF KCU10 » 12.70 15.50 0.40
    DNMG150404FF KCU10 » 12.70 15.50 0.40
    DNMG110404FF KCU10 » 9.53 11.63 0.40
    DNMG-FF

  70. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG-CT

  71. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150604 KCU10 » 12.70 15.50 0.40 - -
    DNGP150604 KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNGP150604 K313 » 12.70 15.50 0.40 6.35 5.16
    DNGP150404 KCU10 » 12.70 15.50 0.40 - -
    DNGP150404 KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGP150404 K313 » 12.70 15.50 0.40 4.76 5.16
    DNGP

  72. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150604FS KCU25 » 12.70 15.50 0.40 6.35 5.16
    DNGG150604FS KC5525 » 12.70 15.50 0.40 6.35 5.16
    DNGG150604FS KC5510 » 12.70 15.50 0.40 6.35 5.16
    DNGG150404FS KCU25 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404FS KC5525 » 12.70 15.50 0.40 4.76 5.16
    DNGG110404FS KC5510 » 9.52 11.63 0.40 4.76 3.81
    DNGG-FS

  73. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150404LF KCU10 » 12.70 15.50 0.40 - -
    DNGG150404LF KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNGG150404LF K313 » 12.70 15.50 0.40 4.76 5.16
    DNGG-LF

  74. DCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT150404FP KCU10 » 12.70 15.50 0.40 4.76 5.50
    DCMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DCMT070204FP KCU25 » 6.35 7.75 0.40 2.38 2.80
    DCMT070204FP KCU10 » 6.35 7.75 0.40 2.38 2.80
    DCMT-FP

  75. DCMT-MW

    Positive ISO insert for Wiper Medium machining.

    Product Code D L10 Rε  
    DCMT11T304MW KCU10 » 9.53 11.63 0.40
    DCMT-MW

  76. DCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCMT11T304LF K313 » 9.53 11.63 0.40 3.97 4.40
    DCMT070204LF K313 » 6.35 7.75 0.40 2.38 2.80
    DCMT-LF

  77. DCMT-FW

    Positive ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε  
    DCMT11T304FW KCU10 » 9.53 11.63 0.40
    DCMT-FW

  78. DCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DCGT11T304HP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DCGT11T304HP KCU10 » 9.53 11.63 0.40 - -
    DCGT11T304HP K313 » 9.53 11.63 0.40 3.97 4.40
    DCGT-HP

Items 1 to 250 of 337 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: HRSA Remove This Item
  2. Radius°: 0.40 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (337)
ISO Insert Range
  1. Beyond Premium (337)
Material Machining
  1. Steel (766)
  2. Stainless Steel (426)
  3. Cast Iron (409)
  4. Aluminium (37)
  5. Universal (281)
Insert Type
  1. Negative (130)
  2. Positive (207)
Type of Cut
  1. Fine Finishing (4)
  2. Finishing (259)
  3. Wiper Finishing (22)
  4. Medium (42)
  5. Wiper Medium (4)
  6. Rough Positive (2)
  7. Rough (4)
Tip Style
  1. CCGT (14)
  2. CCMT (10)
  3. CDHBS (5)
  4. CDHHS (8)
  5. CNGG (6)
  6. CNGP (3)
  7. CNMG (15)
  8. CPGH (4)
  9. CPGT (7)
  10. CPMT (12)
  11. DCGT (6)
  12. DCMT (9)
  13. DNGG (9)
  14. DNGP (6)
  15. DNMG (29)
  16. DPGT (12)
  17. DPMT (5)
  18. SCMT (6)
  19. SNGP (1)
  20. SNMG (2)
  21. SPGT (1)
  22. SPMT (2)
  23. TCGT (8)
  24. TCMT (16)
  25. TDHB (4)
  26. TDHH (8)
  27. TNGG (2)
  28. TNGP (1)
  29. TNMG (15)
  30. TNMP (3)
  31. TPCB (3)
  32. TPCG (3)
  33. TPCH (1)
  34. TPGH (6)
  35. TPGT (12)
  36. TPMT (13)
  37. VBGT (13)
  38. VBMT (8)
  39. VNGG (6)
  40. VNGP (1)
  41. VNMG (10)
  42. VNMP (2)
  43. VNMS (1)
  44. WCMT (4)
  45. WNGG (3)
  46. WNMG (15)
  47. WPMT (4)
  48. WPMTS (3)
Radius°
  1. 0.05 (8)
  2. 0.10 (49)
  3. 0.20 (172)
  4. 0.34 (1)
  5. 0.74 (2)
  6. 0.80 (336)
  7. 1.14 (2)
  8. 1.20 (111)
  9. 1.60 (36)
  10. 2.40 (3)
  11. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...