GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 751 to 1000 of 2618 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Set Ascending Direction

  1. TNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408RP KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK20 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK15B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KC5510 » 9.53 16.50 0.80 4.76 3.81
    TNMG-RP

  2. TNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408RN KCP30 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RN KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RN KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RN KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RN KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG-RN

  3. TNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160408MW KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MW KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MW KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MW KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG-MW

  4. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160408MS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MS KCU10 » 9.53 16.50 0.80 - -
    TNMG160404MS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MS KCU10 » 9.53 16.50 0.40 - -
    TNMG160404MS KC5510 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MS K313 » 9.53 16.50 0.40 4.76 3.81
    TNMG160402MS KCU25 » 9.53 16.50 0.20 4.76 3.81
    TNMG160402MS KCU10 » 9.53 16.50 0.20 - -
    TNMG-MS

  5. TNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160408MP KCU10 » 9.53 16.50 0.80 - -
    TNMG160408MP KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCM35 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404MP KCU10 » 9.53 16.50 0.40 - -
    TNMG160404MP KCM35 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MP KCM25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MP KCM15 » 9.53 16.50 0.40 4.76 3.81
    TNMG-MP

  6. TNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG160408MN KCP30 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MN KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MN KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MN KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MN KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MN KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404MN KCP30 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP25B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP10B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MN KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG-MN

  7. TNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FW KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FW KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FW KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FW KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FW KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FW KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404FW KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FW KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FW KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FW KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FW KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG-FW

  8. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FP KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404FP KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KCM15 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FP KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG-FP

  9. TNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FN KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCK05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404FN KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP25B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP10B » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FN KCK05 » 9.53 16.50 0.40 4.76 3.81
    TNMG110308FN KCP25 » 6.35 11.00 0.80 3.18 2.26
    TNMG110308FN KCP10 » 6.35 11.00 0.80 3.18 2.26
    TNMG110304FN KT315 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KCP25 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KCP10 » 6.35 11.00 0.40 3.18 2.26
    TNMG110304FN KCK05 » 6.35 11.00 0.40 3.18 2.26
    TNMG-FN

  10. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FF KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FF KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404FF KT315 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCU10 » 9.53 16.50 0.40 - -
    TNMG160404FF KCP10 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KCP05 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404FF KC5010 » 9.53 16.50 0.40 4.76 3.81
    TNMG110308FF KC5010 » 6.35 11.00 0.80 3.18 2.26
    TNMG110304FF KCU10 » 6.35 11.00 0.40 - -
    TNMG110304FF KC5010 » 6.35 11.00 0.40 3.18 2.26
    TNMG-FF

  11. TNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160404UP KCM25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404UP KCM15 » 9.53 16.50 0.40 4.76 3.81
    TNMG-UP

  12. TNMA

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMA270616 KCK20 » 15.88 27.50 1.60 6.35 6.35
    TNMA270616 KCK15 » 15.88 27.50 1.60 6.35 6.35
    TNMA270616 K68 » 15.88 27.50 1.60 6.35 6.35
    TNMA220416 KCK20 » 12.70 22.00 1.60 4.76 5.16
    TNMA220416 KCK15 » 12.70 22.00 1.60 4.76 5.16
    TNMA220412 KCK20 » 12.70 22.00 1.20 4.76 5.16
    TNMA220412 KCK15B » 12.70 22.00 1.20 4.76 5.16
    TNMA220412 KCK15 » 12.70 22.00 1.20 4.76 5.16
    TNMA220412 KCK05 » 12.70 22.00 1.20 4.76 5.16
    TNMA220412 K68 » 12.70 22.00 1.20 4.76 5.16
    TNMA220408 KCK20 » 12.70 22.00 0.80 4.76 5.16
    TNMA220408 KCK15B » 12.70 22.00 0.80 4.76 5.16
    TNMA220408 KCK15 » 12.70 22.00 0.80 4.76 5.16
    TNMA220408 KCK05 » 12.70 22.00 0.80 4.76 5.16
    TNMA220408 K68 » 12.70 22.00 0.80 4.76 5.16
    TNMA160416 KCK20 » 9.53 16.50 1.60 4.76 3.81
    TNMA160416 KCK15 » 9.53 16.50 1.60 4.76 3.81
    TNMA160412 KCK20 » 9.53 16.50 1.20 4.76 3.81
    TNMA160412 KCK15B » 9.53 16.50 1.20 4.76 3.81
    TNMA160412 KCK15 » 9.53 16.50 1.20 4.76 3.81
    TNMA160412 KCK05 » 9.53 16.50 1.20 4.76 3.81
    TNMA160408 KCK20 » 9.53 16.50 0.80 4.76 3.81
    TNMA160408 KCK15B » 9.53 16.50 0.80 4.76 3.81
    TNMA160408 KCK15 » 9.53 16.50 0.80 4.76 3.81
    TNMA160408 KCK05 » 9.53 16.50 0.80 4.76 3.81
    TNMA160408 K68 » 9.53 16.50 0.80 4.76 3.81
    TNMA

  13. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGP160408 KCU10 » 9.53 16.50 0.80 - -
    TNGP160408 KC5410 » 9.53 16.50 0.80 4.76 3.81
    TNGP160404 KCU10 » 9.53 16.50 0.40 - -
    TNGP160404 KC5410 » 9.53 16.50 0.40 4.76 3.81
    TNGP160402 KC5410 » 9.53 16.50 0.20 4.76 3.81
    TNGP

  14. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG220408FS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNGG220408FS KCU10 » 12.70 22.00 0.80 - -
    TNGG220408FS KC5510 » 12.70 22.00 0.80 4.76 5.16
    TNGG160408FS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNGG160408FS KC5525 » 9.53 16.50 0.80 4.76 3.81
    TNGG160404FS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNGG160404FS KCU10 » 9.53 16.50 0.40 - -
    TNGG160402FS KCU25 » 9.53 16.50 0.20 4.76 3.81
    TNGG-FS

  15. SNMS

    Negative ISO insert for Medium Roughing machining.

    Product Code D L10 Rε S D1  
    SNMS190612 KC5410 » 19.05 19.05 1.20 6.35 7.93
    SNMS190612 K68 » 19.05 19.05 1.20 6.35 7.93
    SNMS120412 KC5410 » 12.70 12.70 1.20 4.76 5.16
    SNMS120408 KC5410 » 12.70 12.70 0.80 4.76 5.16
    SNMS120408 K68 » 12.70 12.70 0.80 4.76 5.16
    SNMS

  16. SNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM250924RP KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RP KCM25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250724RP KCP40 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RP KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RP KCM25 » 25.40 25.40 2.40 7.94 9.12
    SNMM190624RP KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RP KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RP KCM25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190616RP KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RP KCM25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190612RP KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RP KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RP KCM25 » 19.05 19.05 1.20 6.35 7.93
    SNMM150616RP KCP10 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RP KCM25 » 15.88 15.88 1.60 6.35 6.35
    SNMM150612RP KCP40 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RP KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RP KCM25 » 15.88 15.88 1.20 6.35 6.35
    SNMM120412RP KCP40 » 12.70 12.70 1.20 4.76 5.16
    SNMM120412RP KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120412RP KCM25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120408RP KCP40 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RP KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMM-RP

  17. SNMM-RM

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM250924RM KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP30 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP25B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RM KCP10 » 25.40 25.40 2.40 9.53 9.12
    SNMM250724RM KCP30 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RM KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RM KCP10 » 25.40 25.40 2.40 7.94 9.12
    SNMM190624RM KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RM KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RM KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190616RM KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RM KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMM190612RM KCP40 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RM KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMM150616RM KCP30 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP25B » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP25 » 15.88 15.88 1.60 6.35 6.35
    SNMM150616RM KCP10 » 15.88 15.88 1.60 6.35 6.35
    SNMM150612RM KCP25 » 15.88 15.88 1.20 6.35 6.35
    SNMM150612RM KCP10 » 15.88 15.88 1.20 6.35 6.35
    SNMM120416RM KCP30 » 12.70 12.70 1.60 4.76 5.16
    SNMM120416RM KCP25 » 12.70 12.70 1.60 4.76 5.16
    SNMM120412RM KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMM120408RM KCP30 » 12.70 12.70 0.80 4.76 5.16
    SNMM120408RM KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMM-RM

  18. SNMM-RH

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    SNMM250924RH KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP30 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP25B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP10B » 25.40 25.40 2.40 9.53 9.12
    SNMM250924RH KCP10 » 25.40 25.40 2.40 9.53 9.12
    SNMM250732RH KCP30 » 25.40 25.40 3.20 7.94 9.12
    SNMM250724RH KCP40 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP30 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP25B » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP25 » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP10B » 25.40 25.40 2.40 7.94 9.12
    SNMM250724RH KCP10 » 25.40 25.40 2.40 7.94 9.12
    SNMM190624RH KCP40 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMM190624RH KCP10 » 19.05 19.05 2.40 6.35 7.93
    SNMM190616RH KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMM190616RH KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMM190612RH KCP30 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP25B » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP25 » 19.05 19.05 1.20 6.35 7.93
    SNMM190612RH KCP10 » 19.05 19.05 1.20 6.35 7.93
    SNMM-RH

  19. SNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG250924RN KCP30 » 25.40 25.40 2.40 9.55 9.12
    SNMG190624RN KCP30 » 19.05 19.05 2.40 6.35 7.93
    SNMG190624RN KCP25B » 19.05 19.05 2.40 6.35 7.93
    SNMG190624RN KCP25 » 19.05 19.05 2.40 6.35 7.93
    SNMG190616RN KCP30 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RN KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMG-RN

  20. SNMG-RM

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG250924RM KCP40 » 25.40 25.40 2.40 9.53 9.12
    SNMG250924RM KCP25 » 25.40 25.40 2.40 9.53 9.12
    SNMG-RM

  21. SNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG190616UN KCK20 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616UN KCK15 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616UN KCK05 » 19.05 19.05 1.60 6.35 7.93
    SNMG-UN

  22. SNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG190616RP KCP40 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCP25B » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCP25 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCP10 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCM35 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCM25 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCK20 » 19.05 19.05 1.60 6.35 7.93
    SNMG-RP

Items 751 to 1000 of 2618 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Insert Type: Negative Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (2618)
ISO Insert Range
  1. Beyond Premium (2618)
Material Machining
  1. Steel (1733)
  2. Stainless Steel (726)
  3. Cast Iron (784)
  4. Aluminium (39)
  5. HRSA (542)
  6. Universal (402)
Insert Type
  1. Positive (1993)
Type of Cut
  1. Fine Finishing (19)
  2. Finishing (530)
  3. Wiper Finishing (100)
  4. Medium (683)
  5. Wiper Medium (57)
  6. Medium Roughing (5)
  7. Rough Positive (109)
  8. Rough (841)
  9. Rough Single Sided (274)
Tip Style
  1. CNGG (30)
  2. CNGP (19)
  3. CNMA (27)
  4. CNMG (492)
  5. CNMM (130)
  6. DNGG (23)
  7. DNGP (23)
  8. DNMA (17)
  9. DNMG (474)
  10. DNMM (26)
  11. DNMS (2)
  12. RCGX (2)
  13. RNMA (6)
  14. RNMG (28)
  15. SNGG (7)
  16. SNGP (4)
  17. SNMA (23)
  18. SNMG (288)
  19. SNMM (84)
  20. SNMS (5)
  21. TNGG (8)
  22. TNGP (5)
  23. TNMA (22)
  24. TNMG (342)
  25. TNMM (34)
  26. TNMP (12)
  27. TNMS (5)
  28. VNGG (23)
  29. VNGP (9)
  30. VNMG (128)
  31. VNMP (8)
  32. VNMS (9)
  33. WNGG (9)
  34. WNMA (18)
  35. WNMG (255)
Radius°
  1. 0.10 (28)
  2. 0.20 (46)
  3. 0.34 (2)
  4. 0.40 (399)
  5. 0.74 (6)
  6. 0.80 (850)
  7. 1.14 (7)
  8. 1.20 (784)
  9. 1.60 (360)
  10. 2.40 (87)
  11. 3.20 (6)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...