GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 726 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Ascending Direction

  1. WNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080416RP KCU25 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCU10 » - - - - -
    WNMG080412RP KCU25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412RP KCM35 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCM25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCM15 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408RP KCU25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408RP KCM35 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MS KCU10 » - - - - -
    WNMG080404MS KCU10 » - - - - -
    WNMG080402MS KCU10 » - - - - -
    WNMG080401MS KCU10 » - - - - -
    WNMG060408RP KCU25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408RP KCM25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MS KCU10 » - - - - -
    WNMG-RP

  2. WNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080412UP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412UP KCM35 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412UP KCM25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412UP KCM15 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408UP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408UP KCM35 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408UP KCM25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408UP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG060408UP KCM25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408UP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG-UP

  3. WNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080412MP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412MP KCM35 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MP KCM25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408MP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408MP KCM35 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCM25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG060412MP KCM25 » 9.53 6.52 1.20 4.76 3.81
    WNMG060408MP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408MP KCM35 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MP KCM25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404MP KCU10 » 9.53 6.52 0.40 - -
    WNMG060404MP KCM25 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404MP KCM15 » 9.53 6.52 0.40 4.76 3.81
    WNMG-MP

  4. WNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080412FW KC5010 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408FW KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FW KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FW KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FW KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060412FW KC5010 » 9.53 6.52 1.20 4.76 3.81
    WNMG060408FW KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FW KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404FW KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FW KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FW

  5. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080412FP KCM15 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FP KC5010 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408FP KT315 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FP KT315 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FP KCM15 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060408FP KT315 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404FP KT315 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FP KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FP KCM15 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FP KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FP

  6. WNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080408MS KCU25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404MS KCU25 » 12.70 8.69 0.40 4.76 5.16
    WNMG080402MS KCU25 » 12.70 8.69 0.20 4.76 5.16
    WNMG060408MS KCU25 » 9.53 6.52 0.80 4.76 3.81
    WNMG-MS

  7. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080408FF KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FF KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060408FF KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FF KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404FF KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FF KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FF

  8. WNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080408LF KCU10 » 12.70 8.69 0.80 - -
    WNGG080408LF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNGG080404LF KCU10 » 12.70 8.69 0.40 - -
    WNGG080404LF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNGG080402LF KCU10 » 12.70 8.69 0.20 - -
    WNGG080402LF KC5010 » 12.70 8.69 0.20 4.76 5.16
    WNGG080401LF KCU10 » 12.70 8.69 0.10 - -
    WNGG080401LF KC5010 » 12.70 8.69 0.10 4.76 5.16
    WNGG-LF

  9. VNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG220408MS KCU25 » 12.70 22.14 0.80 4.76 5.16
    VNMG220408MS KCU10 » 12.70 22.14 1.20 4.76 5.16
    VNMG220404MS KCU25 » 12.70 22.14 0.40 4.76 5.16
    VNMG220404MS KCU10 » 12.70 22.14 1.20 4.76 5.16
    VNMG160408MS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MS KCU10 » 9.53 16.61 0.80 - -
    VNMG160404MS KCU25 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MS KCU10 » 9.53 16.61 0.40 - -
    VNMG160402MS KCU25 » 9.53 16.61 0.20 4.76 3.81
    VNMG160402MS KCU10 » 9.53 16.61 0.20 - -
    VNMG160401MS KCU25 » 9.53 16.61 0.10 4.76 3.81
    VNMG160401MS KCU10 » 9.53 16.61 0.10 - -
    VNMG-MS

  10. VNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160412UP KCM25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412UP KCM15 » 9.53 16.61 1.20 4.76 3.81
    VNMG160408UP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408UP KCM25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408UP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160404UP KCU10 » 9.53 16.61 0.40 - -
    VNMG160404UP KCM25 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404UP KCM15 » 9.53 16.61 0.40 4.76 3.81
    VNMG-UP

  11. VNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160412RP KCU25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCU10 » 9.53 16.61 1.20 - -
    VNMG160412RP KCM25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCM15 » 9.53 16.61 1.20 4.76 3.81
    VNMG160408RP KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408RP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNMG-RP

  12. VNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160412MP KCU10 » 9.53 16.61 1.20 - -
    VNMG160412MP KCM25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412MP KCM15 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412MP KC5010 » 9.53 16.61 1.20 4.76 3.81
    VNMG160408MP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408MP KCM35 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MP KCM25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MP KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNMG160404MP KCU10 » 9.53 16.61 0.40 - -
    VNMG160404MP KCM35 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MP KCM25 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MP KCM15 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404MP KC5010 » 9.53 16.61 0.40 4.76 3.81
    VNMG-MP

  13. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408FP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160404FP KCU10 » 9.53 16.61 0.40 - -
    VNMG160404FP KCM15 » 9.53 16.61 0.40 4.76 3.81
    VNMG-FP

  14. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNMG160408FF KCU10 » 9.53 16.61 0.80
    VNMG160404FF KCU10 » 9.53 16.61 0.40
    VNMG-FF

  15. VNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε  
    VNGP220408 KCU10 » 12.70 22.14 0.80
    VNGP220404 KCU10 » - - -
    VNGP160402 KCU10 » 9.53 16.61 0.20
    VNGP160401 KCU10 » 9.53 16.61 0.10
    VNGP

  16. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG220408LF KCU10 » 12.70 22.14 0.80 - -
    VNGG220408LF KC5010 » 12.70 22.14 0.80 4.76 5.16
    VNGG160408LF KCU10 » 9.53 16.61 0.80 - -
    VNGG160408LF KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNGG160404LF KCU10 » 9.53 16.61 0.40 - -
    VNGG160404LF KC5010 » 9.53 16.61 0.40 4.76 3.81
    VNGG160402LF KCU10 » 9.53 16.61 0.20 - -
    VNGG160402LF KC5010 » 9.53 16.61 0.20 4.76 3.81
    VNGG-LF

  17. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160408FS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNGG160404FS KCU25 » 9.53 16.61 0.40 4.76 3.81
    VNGG160402FS KCU25 » 9.53 16.61 0.20 4.76 3.81
    VNGG160401FS KCU25 » 9.53 16.61 0.10 4.76 3.81
    VNGG-FS

  18. TNMM-RP

    Negative ISO insert for Rough Single Sided machining.

    Product Code D L10 Rε S D1  
    TNMM220412RP KCM35 » 12.70 22.00 1.20 4.76 5.16
    TNMM220412RP KCM25 » 12.70 22.00 1.20 4.76 5.16
    TNMM220412RP KCM15 » 12.70 22.00 1.20 4.76 5.16
    TNMM220408RP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMM-RP

  19. TNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG330924RP KCU10 » 19.05 33.00 2.40 - -
    TNMG330924RP KCM25 » 19.05 33.00 2.40 9.53 7.93
    TNMG270616RP KCM35 » 15.88 27.50 1.60 6.35 6.35
    TNMG270616RP KCM25 » 15.88 27.50 1.60 6.35 6.35
    TNMG270616RP KCM15 » 15.88 27.50 1.60 6.35 6.35
    TNMG270612RP KCU25 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RP KCU10 » 15.88 27.50 1.20 - -
    TNMG270612RP KCM35 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RP KCM25 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RP KCM15 » 15.88 27.50 1.20 6.35 6.35
    TNMG220432RP KCU10 » 12.70 22.00 3.18 - -
    TNMG220416RP KCU25 » 12.70 22.00 1.59 4.76 5.16
    TNMG220416RP KCM25 » 12.70 22.00 1.59 4.76 5.16
    TNMG220412RP KCU25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCU10 » 12.70 22.00 1.20 - -
    TNMG220412RP KCM25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCM15 » 12.70 22.00 1.20 4.76 5.16
    TNMG220408RP KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCU10 » 12.70 22.00 0.80 - -
    TNMG220408RP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG160416RP KCM25 » 9.53 16.50 1.60 4.76 3.81
    TNMG160412RP KCU25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCM35 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCM25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160408RP KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCU10 » 9.53 16.50 0.80 - -
    TNMG160408RP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG-RP

  20. TNMG-RM

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG330924RM KCU10 » 19.05 32.99 2.40 9.53 7.93
    TNMG-RM

  21. TNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG270608MS KCU25 » 15.88 27.50 0.80 6.35 6.35
    TNMG220412MS KCU25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MS KCU10 » 12.70 22.00 1.20 - -
    TNMG220408MS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MS KCU10 » 12.70 22.00 0.80 - -
    TNMG220404MS KCU25 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404MS KCU10 » 12.70 22.00 0.40 - -
    TNMG160408MS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MS KCU10 » 9.53 16.50 0.80 - -
    TNMG160404MS KCU25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404MS KCU10 » 9.53 16.50 0.40 - -
    TNMG-MS

  22. TNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    TNMG220416MP KCU10 » 12.70 22.00 1.60 - -
    TNMG220416MP KCM25 » 12.70 22.00 1.60 4.76 5.16
    TNMG220412MP KCU10 » 12.70 22.00 1.20 - -
    TNMG220412MP KCM25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412MP KCM15 » 12.70 22.00 1.20 4.76 5.16
    TNMG220408MP KCU10 » 12.70 22.00 0.80 - -
    TNMG220408MP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408MP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG160412MP KCU10 » 9.53 16.50 1.20 - -
    TNMG160412MP KCM25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412MP KCM15 » 9.53 16.50 1.20 4.76 3.81
    TNMG160408MP KCU10 » 9.53 16.50 0.80 - -
    TNMG160408MP KCM35 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408MP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404MP KCU10 » 9.53 16.50 0.40 - -
    TNMG160404MP KCM35 » 9.53 16.50 0.40 4.76 3.81
    TNMG-MP

  23. TNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG220412UP KCM35 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412UP KCM25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412UP KCM15 » 12.70 22.00 1.20 4.76 5.16
    TNMG220408UP KCM35 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG160412UP KCM25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412UP KCM15 » 9.53 16.50 1.20 4.76 3.81
    TNMG160408UP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408UP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160404UP KCM25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404UP KCM15 » 9.53 16.50 0.40 4.76 3.81
    TNMG-UP

  24. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220408FP KT315 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FP KC5010 » 12.70 22.00 0.80 4.76 5.16
    TNMG220404FP KT315 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FP KCM15 » 12.70 22.00 0.40 4.76 5.16
    TNMG220404FP KC5010 » 12.70 22.00 0.40 4.76 5.16
    TNMG160412FP KCM15 » 9.53 16.50 1.20 4.76 3.81
    TNMG160408FP KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG-FP

  25. TNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160412FW KCU10 » 9.53 16.50 1.20 - -
    TNMG160412FW KC5010 » 9.53 16.50 1.20 4.76 3.81
    TNMG160408FW KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FW KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG-FW

  26. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FF KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FF KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG-FF

Items 1 to 250 of 726 total

per page
Page:
  1. 1
  2. 2
  3. 3

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Stainless Steel Remove This Item
  2. Insert Type: Negative Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (726)
ISO Insert Range
  1. Beyond Premium (726)
Material Machining
  1. Steel (1733)
  2. Cast Iron (784)
  3. Aluminium (39)
  4. HRSA (542)
  5. Universal (402)
Insert Type
  1. Positive (786)
Type of Cut
  1. Fine Finishing (8)
  2. Finishing (178)
  3. Wiper Finishing (31)
  4. Medium (241)
  5. Wiper Medium (3)
  6. Rough Positive (39)
  7. Rough (194)
  8. Rough Single Sided (32)
Tip Style
  1. CNGG (17)
  2. CNGP (4)
  3. CNMG (163)
  4. CNMM (17)
  5. DNGG (11)
  6. DNGP (12)
  7. DNMG (138)
  8. DNMM (2)
  9. RCGX (1)
  10. SNGG (7)
  11. SNGP (2)
  12. SNMG (71)
  13. SNMM (9)
  14. TNGG (6)
  15. TNGP (2)
  16. TNMG (100)
  17. TNMM (4)
  18. VNGG (12)
  19. VNGP (4)
  20. VNMG (48)
  21. WNGG (8)
  22. WNMG (88)
Radius°
  1. 0.10 (14)
  2. 0.20 (27)
  3. 0.34 (1)
  4. 0.40 (141)
  5. 0.74 (2)
  6. 0.80 (255)
  7. 1.14 (2)
  8. 1.20 (206)
  9. 1.60 (62)
  10. 2.40 (7)
  11. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...