GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 1733 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction

  1. WNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080416RP KCU25 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCU10 » - - - - -
    WNMG080416RP KCP30 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCP25B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCP25 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCP10B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCP10 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RP KCP05 » 12.70 8.69 1.60 4.76 5.16
    WNMG080412RP KCU25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412RP KCP40 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP30 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408RP KCU25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408RP KCP40 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP30 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP25B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP10B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCP05 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MS KCU10 » - - - - -
    WNMG080404MS KCU10 » - - - - -
    WNMG080402MS KCU10 » - - - - -
    WNMG080401MS KCU10 » - - - - -
    WNMG060412RP KCP25 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412RP KCP10 » 9.53 6.52 1.20 4.76 3.81
    WNMG060408RP KCU25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408RP KCP25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCP10B » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MS KCU10 » - - - - -
    WNMG-RP

  2. WNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG080416RN KCP30 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RN KCP25B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RN KCP25 » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RN KCP10B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416RN KCP10 » 12.70 8.69 1.60 4.76 5.16
    WNMG080412RN KCP40 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP30 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RN KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408RN KCP40 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP30 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP25B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP10B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RN KCP05 » 12.70 8.69 0.80 4.76 5.16
    WNMG060412RN KCP25 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412RN KCP10 » 9.53 6.52 1.20 4.76 3.81
    WNMG060408RN KCP25B » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RN KCP25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RN KCP10B » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RN KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG-RN

  3. WNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080416MN KCP25B » 12.70 8.69 1.60 4.76 5.16
    WNMG080416MN KCP25 » 12.70 8.69 1.60 4.76 5.16
    WNMG080412MN KCP40 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MN KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408MN KCP40 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP30 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP25B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP10B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MN KCP05 » 12.70 8.69 0.80 4.76 5.16
    WNMG060412MN KCP25 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412MN KCP10 » 9.53 6.52 1.20 4.76 3.81
    WNMG060408MN KCP30 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MN KCP25B » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MN KCP25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MN KCP10B » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MN KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404MN KCP25 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404MN KCP10B » 9.53 6.52 0.40 4.76 3.81
    WNMG060404MN KCP10 » 9.53 6.52 0.40 4.76 3.81
    WNMG-MN

  4. WNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε  
    WNMG080412UP KCU10 » 12.70 8.69 1.20
    WNMG080408UP KCU10 » 12.70 8.69 0.80
    WNMG-UP

  5. WNMG-MW

    Negative ISO insert for Wiper Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080412MW KCP25B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412MW KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408MW KCP25B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MW KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MW KCP10B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MW KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MW KCP05 » 12.70 8.69 0.80 4.76 5.16
    WNMG060412MW KCP25 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412MW KCP10 » 9.53 6.52 1.20 4.76 3.81
    WNMG060408MW KCP25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MW KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MW KCP05 » 9.53 6.52 0.80 4.76 3.81
    WNMG-MW

  6. WNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080412MP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412MP KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408MP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408MP KCP25B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408MP KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG060408MP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408MP KCP25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408MP KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404MP KCU10 » 9.53 6.52 0.40 - -
    WNMG-MP

  7. WNMG-FW

    Negative ISO insert for Wiper Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080412FW KT315 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KCP10B » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KCP10 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KCP05 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412FW KC5010 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408FW KT315 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FW KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FW KCP10B » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FW KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FW KCP05 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FW KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FW KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FW KCP10 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FW KCP05 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FW KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060412FW KCP10 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412FW KCP05 » 9.53 6.52 1.20 4.76 3.81
    WNMG060412FW KC5010 » 9.53 6.52 1.20 4.76 3.81
    WNMG060408FW KT315 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FW KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FW KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FW KCP05 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FW KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404FW KT315 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FW KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FW KCP10B » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FW KCP10 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FW KCP05 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FW KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FW

  8. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080412FP KC5010 » 12.70 8.69 1.20 4.76 5.16
    WNMG080408FP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FP KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FP KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FP KCP25 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KCP10 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FP KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060408FP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FP KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404FP KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FP KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FP

  9. WNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    WNMG080408MS KCU25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404MS KCU25 » 12.70 8.69 0.40 4.76 5.16
    WNMG080402MS KCU25 » 12.70 8.69 0.20 4.76 5.16
    WNMG060408MS KCU25 » 9.53 6.52 0.80 4.76 3.81
    WNMG-MS

  10. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG080408FF KT315 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FF KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FF KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080404FF KT315 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FF KCU10 » 12.70 8.69 0.40 - -
    WNMG080404FF KCP10 » 12.70 8.69 0.40 4.76 5.16
    WNMG080404FF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNMG060408FF KT315 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FF KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FF KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FF KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060404FF KT315 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FF KCU10 » 9.53 6.52 0.40 - -
    WNMG060404FF KCP10 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404FF KC5010 » 9.53 6.52 0.40 4.76 3.81
    WNMG-FF

  11. WNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080408LF KCU10 » 12.70 8.69 0.80 - -
    WNGG080408LF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNGG080404LF KCU10 » 12.70 8.69 0.40 - -
    WNGG080404LF KC5010 » 12.70 8.69 0.40 4.76 5.16
    WNGG080402LF KCU10 » 12.70 8.69 0.20 - -
    WNGG080402LF KC5010 » 12.70 8.69 0.20 4.76 5.16
    WNGG080401LF KCU10 » 12.70 8.69 0.10 - -
    WNGG080401LF KC5010 » 12.70 8.69 0.10 4.76 5.16
    WNGG-LF

  12. VNMP-K

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMP160408K KCP25 » 9.53 16.61 0.80 4.76 3.81
    VNMP160408K KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMP160404K KCP25B » 9.53 16.61 0.40 4.76 3.81
    VNMP160404K KCP25 » 9.53 16.61 0.40 4.76 3.81
    VNMP-K

  13. VNMG-RN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG220412RN KCP30 » 12.70 22.14 1.20 4.76 5.16
    VNMG220412RN KCP25 » 12.70 22.14 1.20 4.76 5.16
    VNMG220412RN KCP10 » 12.70 22.14 1.20 4.76 5.16
    VNMG220408RN KCP40 » 12.70 22.14 0.80 4.76 5.16
    VNMG220408RN KCP30 » 12.70 22.14 0.80 4.76 5.16
    VNMG220408RN KCP25B » 12.70 22.14 0.80 4.76 5.16
    VNMG220408RN KCP25 » 12.70 22.14 0.80 4.76 5.16
    VNMG220408RN KCP10B » 12.70 22.14 0.80 4.76 5.16
    VNMG220408RN KCP10 » 12.70 22.14 0.80 4.76 5.16
    VNMG160412RN KCP25B » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RN KCP25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RN KCP10 » 9.53 16.61 1.20 4.76 3.81
    VNMG160408RN KCP25B » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RN KCP25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RN KCP10B » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RN KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG-RN

  14. VNMG-MS

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG220408MS KCU25 » 12.70 22.14 0.80 4.76 5.16
    VNMG220408MS KCU10 » 12.70 22.14 1.20 4.76 5.16
    VNMG220404MS KCU25 » 12.70 22.14 0.40 4.76 5.16
    VNMG220404MS KCU10 » 12.70 22.14 1.20 4.76 5.16
    VNMG160408MS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MS KCU10 » 9.53 16.61 0.80 - -
    VNMG160404MS KCU25 » 9.53 16.61 0.40 4.76 3.81
    VNMG-MS

  15. VNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160412RP KCU25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCU10 » 9.53 16.61 1.20 - -
    VNMG160412RP KCP25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCP10 » 9.53 16.61 1.20 4.76 3.81
    VNMG160408RP KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408RP KCP25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNMG-RP

  16. VNMG-MP

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160412MP KCU10 » 9.53 16.61 1.20 - -
    VNMG160412MP KC5010 » 9.53 16.61 1.20 4.76 3.81
    VNMG160408MP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408MP KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNMG-MP

  17. VNMG-MN

    Negative ISO insert for Medium machining.

    Product Code D L10 Rε S D1  
    VNMG160412MN KCP30 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412MN KCP25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412MN KCP10 » 9.53 16.61 1.20 4.76 3.81
    VNMG160408MN KCP30 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MN KCP25B » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MN KCP25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MN KCP10B » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MN KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408MN KCP05 » 9.53 16.61 0.80 4.76 3.81
    VNMG-MN

  18. VNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε  
    VNMG160408UP KCU10 » 9.53 16.61 0.80
    VNMG160404UP KCU10 » 9.53 16.61 0.40
    VNMG-UP

  19. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FP KT315 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408FP KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG-FP

  20. VNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FN KT315 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FN KCP25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FN KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FN KCP05 » 9.53 16.61 0.80 4.76 3.81
    VNMG-FN

  21. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FF KT315 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FF KCU10 » 9.53 16.61 0.80 - -
    VNMG160408FF KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FF KCP05 » 9.53 16.61 0.80 4.76 3.81
    VNMG-FF

Items 1 to 250 of 1733 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Steel Remove This Item
  2. Insert Type: Negative Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (1733)
ISO Insert Range
  1. Beyond Premium (1733)
Material Machining
  1. Stainless Steel (726)
  2. Cast Iron (784)
  3. Aluminium (39)
  4. HRSA (542)
  5. Universal (402)
Insert Type
  1. Positive (1272)
Type of Cut
  1. Fine Finishing (19)
  2. Finishing (393)
  3. Wiper Finishing (100)
  4. Medium (404)
  5. Wiper Medium (54)
  6. Rough Positive (63)
  7. Rough (458)
  8. Rough Single Sided (242)
Tip Style
  1. CNGG (17)
  2. CNGP (4)
  3. CNMG (337)
  4. CNMM (113)
  5. DNGG (11)
  6. DNGP (12)
  7. DNMG (359)
  8. DNMM (24)
  9. RCGX (1)
  10. RNMG (23)
  11. SNGG (7)
  12. SNGP (2)
  13. SNMG (181)
  14. SNMM (75)
  15. TNGG (6)
  16. TNGP (2)
  17. TNMG (237)
  18. TNMM (30)
  19. VNGG (12)
  20. VNGP (4)
  21. VNMG (84)
  22. VNMP (4)
  23. WNGG (8)
  24. WNMG (180)
Radius°
  1. 0.10 (14)
  2. 0.20 (28)
  3. 0.34 (2)
  4. 0.40 (286)
  5. 0.74 (6)
  6. 0.80 (561)
  7. 1.14 (7)
  8. 1.20 (492)
  9. 1.60 (221)
  10. 2.40 (80)
  11. 3.20 (5)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...