ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

Achieve higher metal removal rates
(speed, feed, and depth of cut).
Gain longer tool life.

Reliability

Deliver uniform wear for predictable tool life.
Achieve reduced depth-of-cut notching.
Virtually eliminate chip flow damage.

Versatility

Products can be applied across a wide range of applications.
Can be used in low- to high-speed applications.

Complete Portfolio

The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

WPMTS-LF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WPMTS3T104LF KC5025 »	4.76	3.25	0.40	1.98	2.15
WPMTS3T104LF KC5010 »	4.76	3.25	0.40	1.98	2.15

WPMTS-FP

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WPMTS3T104FP KCU10 »	4.76	3.25	0.40	1.98	2.15
WPMTS3T104FP KCP25 »	4.76	3.25	0.40	1.98	2.15

WPMT-LF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WPMT06T304LF KCP25 »	9.53	6.52	0.40	3.97	4.40
WPMT06T304LF KCP10 »	9.53	6.52	0.40	3.97	4.40
WPMT06T304LF KCM25 »	9.53	6.52	0.40	3.97	4.40
WPMT06T304LF KCM15 »	9.53	6.52	0.40	3.97	4.40
WPMT06T304LF KCK20 »	9.53	6.52	0.40	3.97	4.40
WPMT040204LF KCP10 »	6.35	4.34	0.40	2.38	2.90
WPMT040204LF KCK20 »	6.35	4.34	0.40	2.38	2.90
WPMT040204LF KCK05 »	6.35	4.34	0.40	2.38	2.90
WPMT040204LF KC5025 »	6.35	4.34	0.40	2.38	2.90
WPMT040204LF KC5010 »	6.35	4.34	0.40	2.38	2.90

WPMT-FP

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WPMT06T304FP KCU10 »	9.53	6.52	0.40	3.97	4.40
WPMT06T304FP KCP10 »	9.53	6.52	0.40	3.97	4.40
WPMT06T304FP KCM25 »	9.53	6.52	0.40	3.97	4.40
WPMT06T304FP KCM15 »	9.53	6.52	0.40	3.97	4.40
WPMT040204FP KCU10 »	6.35	4.34	0.40	2.38	2.80
WPMT040204FP KCP25 »	6.35	4.34	0.40	2.38	2.80
WPMT040204FP KCM25 »	6.35	4.34	0.40	2.38	2.80

WNMG-UN

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
WNMG080404UN KCK20 »	12.70	8.69	0.40	4.76	5.16
WNMG080404UN KCK15 »	12.70	8.69	0.40	4.76	5.16
WNMG080404UN KCK05 »	12.70	8.69	0.40	4.76	5.16
WNMG060404UN KCK20 »	9.53	6.52	0.40	4.76	3.81
WNMG060404UN KCK15 »	9.53	6.52	0.40	4.76	3.81
WNMG060404UN KCK05 »	9.53	6.52	0.40	4.76	3.81

WNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
WNMG080404MS KCU25 »	12.70	8.69	0.40	4.76	5.16
WNMG080404MS K313 »	12.70	8.69	0.40	4.76	5.16

WNMG-FW

Negative ISO insert for Wiper Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG080404FW KCU10 »	12.70	8.69	0.40	-	-
WNMG080404FW KCP10 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FW KCP05 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FW KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG060404FW KT315 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FW KCU10 »	9.53	6.52	0.40	-	-
WNMG060404FW KCP10B »	9.53	6.52	0.40	4.76	3.81
WNMG060404FW KCP10 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FW KCP05 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FW KC5010 »	9.53	6.52	0.40	4.76	3.81

WNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG080404FP KT315 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FP KCU10 »	12.70	8.69	0.40	-	-
WNMG080404FP KCP25 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FP KCP10 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FP KCM15 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FP KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG060404FP KT315 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FP KCU10 »	9.53	6.52	0.40	-	-
WNMG060404FP KCM15 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FP KC5010 »	9.53	6.52	0.40	4.76	3.81

WNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNMG080404FF KT315 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FF KCU10 »	12.70	8.69	0.40	-	-
WNMG080404FF KCP10 »	12.70	8.69	0.40	4.76	5.16
WNMG080404FF KC5010 »	12.70	8.69	0.40	4.76	5.16
WNMG060404FF KT315 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FF KCU10 »	9.53	6.52	0.40	-	-
WNMG060404FF KCP10 »	9.53	6.52	0.40	4.76	3.81
WNMG060404FF KC5010 »	9.53	6.52	0.40	4.76	3.81

WNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
WNMG060404MP KCU10 »	9.53	6.52	0.40	-	-
WNMG060404MP KCM25 »	9.53	6.52	0.40	4.76	3.81
WNMG060404MP KCM15 »	9.53	6.52	0.40	4.76	3.81

WNMG-MN

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
WNMG060404MN KCP25 »	9.53	6.52	0.40	4.76	3.81
WNMG060404MN KCP10B »	9.53	6.52	0.40	4.76	3.81
WNMG060404MN KCP10 »	9.53	6.52	0.40	4.76	3.81

WNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNGG080404LF KCU10 »	12.70	8.69	0.40	-	-
WNGG080404LF KC5010 »	12.70	8.69	0.40	4.76	5.16

WNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WNGG080404FS KC5510 »	12.70	8.69	0.40	4.76	5.16

WCMT-LF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WCMT040204LF KC850 »	6.35	4.34	0.40	2.38	2.80
WCMT040204LF KC5025 »	6.35	4.34	0.40	2.38	2.80
WCMT040204LF KC5010 »	6.35	4.34	0.40	2.38	2.80

WCMT-FP

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
WCMT040204FP KCU25 »	6.35	4.34	0.40	2.38	2.80
WCMT040204FP KCU10 »	6.35	4.34	0.40	2.38	2.80

VNMS-FST

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMS160404FST KD1400 »	9.53	16.61	0.40	4.76	3.81

VNMS-E

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMS160404E KD1405 »	9.53	16.61	0.40	4.76	3.81

VNMS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMS160404 KC5410 »	9.53	16.61	0.40	4.76	3.81
VNMS160404 K68 »	9.53	16.61	0.40	4.76	3.81

VNMP-K

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMP160404K KCP25B »	9.53	16.61	0.40	4.76	3.81
VNMP160404K KCP25 »	9.53	16.61	0.40	4.76	3.81
VNMP160404K K68 »	9.53	16.61	0.40	4.76	3.81

VNMP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMP160404 K313 »	9.53	16.61	0.40	4.76	3.81

VNMG-MS

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG220404MS KCU25 »	12.70	22.14	0.40	4.76	5.16
VNMG220404MS KC5525 »	12.70	22.14	0.40	4.76	5.16
VNMG160404MS KCU25 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MS KCU10 »	9.53	16.61	0.40	-	-
VNMG160404MS K313 »	9.53	16.61	0.40	4.76	3.81

VNMG-UP

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
VNMG160404UP KCU10 »	9.53	16.61	0.40	-	-
VNMG160404UP KCM25 »	9.53	16.61	0.40	4.76	3.81
VNMG160404UP KCM15 »	9.53	16.61	0.40	4.76	3.81

VNMG-UN

Negative ISO insert for Rough machining.

Product Code	D	L10	Rε	S	D1
VNMG160404UN KCK20 »	9.53	16.61	0.40	4.76	3.81
VNMG160404UN KCK15B »	9.53	16.61	0.40	4.76	3.81
VNMG160404UN KCK15 »	9.53	16.61	0.40	4.76	3.81
VNMG160404UN KCK05 »	9.53	16.61	0.40	4.76	3.81

VNMG-MP

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG160404MP KCU10 »	9.53	16.61	0.40	-	-
VNMG160404MP KCM35 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MP KCM25 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MP KCM15 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MP KC5010 »	9.53	16.61	0.40	4.76	3.81

VNMG-MN

Negative ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VNMG160404MN KCP30 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MN KCP25B »	9.53	16.61	0.40	4.76	3.81
VNMG160404MN KCP25 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MN KCP10B »	9.53	16.61	0.40	4.76	3.81
VNMG160404MN KCP10 »	9.53	16.61	0.40	4.76	3.81
VNMG160404MN KCP05 »	9.53	16.61	0.40	4.76	3.81

VNMG-FP

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNMG160404FP KT315 »	9.53	16.61	0.40	4.76	3.81
VNMG160404FP KCU10 »	9.53	16.61	0.40	-	-
VNMG160404FP KCM15 »	9.53	16.61	0.40	4.76	3.81

VNMG-FN

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNMG160404FN KT315 »	9.53	16.61	0.40	4.76	3.81
VNMG160404FN KCP25B »	9.53	16.61	0.40	4.76	3.81
VNMG160404FN KCP25 »	9.53	16.61	0.40	4.76	3.81
VNMG160404FN KCP10B »	9.53	16.61	0.40	4.76	3.81
VNMG160404FN KCP10 »	9.53	16.61	0.40	4.76	3.81
VNMG160404FN KCP05 »	9.53	16.61	0.40	4.76	3.81
VNMG160404FN KCK05 »	9.53	16.61	0.40	4.76	3.81

VNMG-FF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNMG160404FF KT315 »	9.53	16.61	0.40	4.76	3.81
VNMG160404FF KCU10 »	9.53	16.61	0.40	-	-
VNMG160404FF KCP10B »	9.53	16.61	0.40	4.76	3.81
VNMG160404FF KCP10 »	9.53	16.61	0.40	4.76	3.81
VNMG160404FF KCP05 »	9.53	16.61	0.40	4.76	3.81

VNGP-K

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNGP160404K K313 »	9.53	16.61	0.40	4.76	3.81

VNGG-LF

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNGG160404LF KCU10 »	9.53	16.61	0.40	-	-
VNGG160404LF KC730 »	9.53	16.61	0.40	4.76	3.81
VNGG160404LF KC5010 »	9.53	16.61	0.40	4.76	3.81
VNGG160404LF K313 »	9.53	16.61	0.40	4.76	3.81

VNGG-FS

Negative ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VNGG160404FS KCU25 »	9.53	16.61	0.40	4.76	3.81
VNGG160404FS K313 »	9.53	16.61	0.40	4.76	3.81

VBMT-MP

Positive ISO insert for Medium machining.

Product Code	D	L10	Rε	S	D1
VBMT160404MP KCP25 »	9.53	16.61	0.40	4.76	4.40
VBMT160404MP KCM25 »	9.53	16.61	0.40	4.76	4.40
VBMT160404MP KCK20 »	9.53	16.61	0.40	4.76	4.40

VBMT-LF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VBMT160404LF KT315 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCP30 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCP25B »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCP25 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCP10B »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCP10 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCP05 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCM35 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCM25 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCM15 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCK20 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCK15B »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCK15 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KCK05 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF KC5025 »	9.53	16.61	0.40	4.76	4.40
VBMT160404LF K313 »	9.53	16.61	0.40	4.76	4.40
VBMT110304LF KT315 »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KCP30 »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KCP25B »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KCP25 »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KCP10B »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KCP10 »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KCP05 »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KCM25 »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KCM15 »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KCK20 »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KCK05 »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF KC5025 »	6.35	11.07	0.40	3.18	2.80
VBMT110304LF K313 »	6.35	11.07	0.40	3.18	2.80

VBMT-FP

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VBMT160404FP KTP10 »	9.53	16.61	0.40	4.76	4.40
VBMT160404FP KCU25 »	9.53	16.61	0.40	4.76	4.40
VBMT160404FP KCU10 »	9.53	16.61	0.40	4.76	4.40
VBMT160404FP KCP25B »	9.53	16.61	0.40	4.76	4.40
VBMT160404FP KCP25 »	9.53	16.61	0.40	4.76	4.40
VBMT160404FP KCP10B »	9.53	16.61	0.40	4.76	4.40
VBMT160404FP KCP10 »	9.53	16.61	0.40	4.76	4.40
VBMT160404FP KCP05 »	9.53	16.61	0.40	4.76	4.40
VBMT160404FP KCM25 »	9.53	16.61	0.40	4.76	4.40
VBMT160404FP KCM15 »	9.53	16.61	0.40	4.76	4.40
VBMT160404FP KCK20 »	9.53	16.61	0.40	4.76	4.40
VBMT110304FP KTP10 »	6.35	11.07	0.40	3.18	2.80
VBMT110304FP KCU25 »	6.35	11.07	0.40	3.18	2.80
VBMT110304FP KCU10 »	6.35	11.07	0.40	3.18	2.80
VBMT110304FP KCP25 »	6.35	11.07	0.40	3.18	2.80
VBMT110304FP KCP10 »	6.35	11.07	0.40	3.18	2.80
VBMT110304FP KCM25 »	6.35	11.07	0.40	3.18	2.80
VBMT110304FP KCM15 »	6.35	11.07	0.40	3.18	2.80

VBMT

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VBMT16040411 KT315 »	9.53	16.61	0.40	4.76	4.40
VBMT11030411 KT315 »	6.35	11.07	0.40	3.18	2.80

VBGT-LF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VBGT1604X0LF KC5025 »	9.53	16.61	0.04	4.76	4.40
VBGT160404LF KCU10 »	9.53	16.61	0.40	-	-
VBGT160404LF KC5410 »	9.53	16.61	0.40	4.76	4.40
VBGT160404LF KC5025 »	9.53	16.61	0.40	4.76	4.40
VBGT110304LF KCU10 »	6.35	11.07	0.40	-	-
VBGT110304LF KC5410 »	6.35	11.07	0.40	3.18	2.80
VBGT110304LF KC5025 »	6.35	11.07	0.40	3.18	2.80
VBGT110304LF K313 »	6.35	11.07	0.40	3.18	2.80

VBGT-HP

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
VBGT160404HP KCU25 »	9.53	16.61	0.40	4.76	4.40
VBGT160404HP KCU10 »	9.53	16.61	0.40	-	-
VBGT160404HP KC5410 »	9.53	16.61	0.40	4.76	4.40
VBGT160404HP KC5025 »	9.53	16.61	0.40	4.76	4.40
VBGT160404HP K313 »	9.53	16.61	0.40	4.76	4.40
VBGT110304HP KCU25 »	6.35	11.07	0.40	3.18	2.80
VBGT110304HP KCU10 »	6.35	11.07	0.40	-	-
VBGT110304HP KC5410 »	6.35	11.07	0.40	3.18	2.80
VBGT110304HP KC5025 »	6.35	11.07	0.40	3.18	2.80

TPMT-UF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TPMT16T304UF KCP10 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304UF KC5010 »	9.53	16.50	0.40	3.97	4.40
TPMT110204UF KCP10 »	6.35	11.00	0.40	2.38	2.80
TPMT110204UF KCP05 »	6.35	11.00	0.40	2.38	2.80
TPMT110204UF KC5010 »	6.35	11.00	0.40	2.38	2.80

TPMT-LF

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TPMT16T304LF KT315 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304LF KCP25B »	9.53	16.50	0.40	3.97	4.40
TPMT16T304LF KCP25 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304LF KCP10B »	9.53	16.50	0.40	3.97	4.40
TPMT16T304LF KCP10 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304LF KCM25 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304LF KCM15 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304LF KCK20 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304LF KCK15 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304LF KCK05 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304LF KC5025 »	9.53	16.50	0.40	3.97	4.40
TPMT110204LF KT315 »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCP25B »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCP25 »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCP10B »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCP10 »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCP05 »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCM25 »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCM15 »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCK20 »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCK15B »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCK15 »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KCK05 »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF KC5025 »	6.35	11.00	0.40	2.38	2.80
TPMT110204LF K313 »	6.35	11.00	0.40	2.38	2.80
TPMT090204LF KT315 »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF KCP25B »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF KCP25 »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF KCP10B »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF KCP10 »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF KCP05 »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF KCM25 »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF KCM15 »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF KCK15 »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF KCK05 »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF KC5025 »	5.56	9.63	0.40	2.38	2.65
TPMT090204LF K313 »	5.56	9.63	0.40	2.38	2.65

TPMT-FP

Positive ISO insert for Finishing machining.

Product Code	D	L10	Rε	S	D1
TPMT16T304FP KCU10 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304FP KCP25 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304FP KCP10 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304FP KCM25 »	9.53	16.50	0.40	3.97	4.40
TPMT16T304FP KCK20 »	9.53	16.50	0.40	3.97	4.40
TPMT110304FP KCU25 »	6.35	11.00	0.40	3.18	2.80
TPMT110304FP KCU10 »	6.35	11.00	0.40	3.18	2.80
TPMT110204FP KCU25 »	6.35	11.00	0.40	2.38	2.80
TPMT110204FP KCU10 »	6.35	11.00	0.40	2.38	2.80
TPMT110204FP KCP25 »	6.35	11.00	0.40	2.38	2.80
TPMT110204FP KCP10 »	6.35	11.00	0.40	2.38	2.80
TPMT110204FP KCM25 »	6.35	11.00	0.40	2.38	2.80
TPMT110204FP KCM15 »	6.35	11.00	0.40	2.38	2.80
TPMT110204FP KCK20 »	6.35	11.00	0.40	2.38	2.80
TPMT090204FP KCU10 »	5.56	9.63	0.40	2.38	2.50