GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 1 to 250 of 287 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

  1. CNMA

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMA120404 KCK20 » 12.70 12.90 0.40 4.76 5.16
    CNMA120408 KCK20 » 12.70 12.90 0.80 4.76 5.16
    CNMA120412 KCK20 » 12.70 12.90 1.20 4.76 5.16
    CNMA120416 KCK20 » 12.70 12.90 1.60 4.76 5.16
    CNMA160608 KCK20 » 15.88 16.12 0.80 6.35 6.35
    CNMA160612 KCK20 » 15.88 16.12 1.20 6.35 6.35
    CNMA160616 KCK20 » 15.88 16.12 1.60 6.35 6.35
    CNMA190608 KCK20 » 19.05 19.34 0.80 6.35 7.93
    CNMA190612 KCK20 » 19.05 19.34 1.20 6.35 7.93
    CNMA190616 KCK20 » 19.05 19.34 1.60 6.35 7.93
    CNMA

  2. CNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120404UN KCK05 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK15B » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UN KCK20 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408UN KCK05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UN KCK15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UN KCK15B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UN KCK20 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412UN KCK05 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK15B » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UN KCK20 » 12.70 12.90 1.20 4.76 5.16
    CNMG120416UN KCK05 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416UN KCK15 » 12.70 12.90 1.60 4.76 5.16
    CNMG120416UN KCK15B » 12.70 12.90 1.60 4.76 5.16
    CNMG120416UN KCK20 » 12.70 12.90 1.60 4.76 5.16
    CNMG160608UN KCK05 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UN KCK15 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UN KCK15B » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UN KCK20 » 15.88 16.12 0.80 6.35 6.35
    CNMG160612UN KCK05 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UN KCK15 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UN KCK15B » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UN KCK20 » 15.88 16.12 1.20 6.35 6.35
    CNMG160616UN KCK05 » 15.88 16.12 1.60 6.35 6.35
    CNMG160616UN KCK15 » 15.88 16.12 1.60 6.35 6.35
    CNMG160616UN KCK15B » 15.88 16.12 1.60 6.35 6.35
    CNMG160616UN KCK20 » 15.88 16.12 1.60 6.35 6.35
    CNMG190608UN KCK05 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608UN KCK15 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608UN KCK15B » 19.05 19.34 0.80 6.35 7.93
    CNMG190608UN KCK20 » 19.05 19.34 0.80 6.35 7.93
    CNMG190612UN KCK05 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UN KCK15 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UN KCK15B » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UN KCK20 » 19.05 19.34 1.20 6.35 7.93
    CNMG190616UN KCK05 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616UN KCK15 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616UN KCK20 » 19.05 19.34 1.60 6.35 7.93
    CNMG-UN

  3. DNMA

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMA110408 KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMA110412 KCK20 » 9.53 11.63 1.20 4.76 3.81
    DNMA150408 KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMA150412 KCK20 » 12.70 15.50 1.20 4.76 5.16
    DNMA150416 KCK20 » 12.70 15.50 1.60 4.76 5.16
    DNMA150608 KCK20 » 12.70 15.50 0.80 6.35 5.16
    DNMA150612 KCK20 » 12.70 15.50 1.20 6.35 5.16
    DNMA150616 KCK20 » 12.70 15.50 1.60 6.35 5.16
    DNMA

  4. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408RP KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110412RP KCK20 » 9.53 11.63 1.20 4.76 3.81
    DNMG150408RP KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150412RP KCK15 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCK20 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCU10 » 12.70 15.50 1.20 - -
    DNMG150416RP KCK20 » 12.70 15.50 1.60 4.76 5.16
    DNMG150416RP KCU10 » 12.70 15.50 1.60 - -
    DNMG150608RP KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCK15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCK15B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCK20 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150612RP KCK05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCK15 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCK20 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCU10 » 12.70 15.50 1.20 - -
    DNMG150616RP KCK20 » 12.70 15.50 1.60 6.35 5.16
    DNMG-RP

  5. DNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK15B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UN KCK20 » 9.53 11.63 0.80 4.76 3.81
    DNMG110412UN KCK05 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UN KCK15 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UN KCK15B » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UN KCK20 » 9.53 11.63 1.20 4.76 3.81
    DNMG150408UN KCK05 » 12.70 15.50 0.80 - -
    DNMG150408UN KCK15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UN KCK15B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UN KCK20 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412UN KCK05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UN KCK15 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UN KCK20 » 12.70 15.50 1.20 4.76 5.16
    DNMG150416UN KCK15 » 12.70 15.50 1.60 4.76 5.16
    DNMG150416UN KCK20 » 12.70 15.50 1.60 4.76 5.16
    DNMG150608UN KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UN KCK15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UN KCK15B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UN KCK20 » 12.70 15.50 0.80 6.35 5.16
    DNMG150612UN KCK05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612UN KCK15 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612UN KCK15B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612UN KCK20 » 12.70 15.50 1.20 6.35 5.16
    DNMG150616UN KCK15 » 12.70 15.50 1.60 6.35 5.16
    DNMG150616UN KCK15B » 12.70 15.50 1.60 6.35 5.16
    DNMG150616UN KCK20 » 12.70 15.50 1.60 6.35 5.16
    DNMG-UN

  6. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG110412UP KC5010 » 9.53 11.63 1.20 4.76 3.81
    DNMG150404UP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCU10 » 12.70 15.50 0.40 - -
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150412UP KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCU10 » 12.70 15.50 1.20 - -
    DNMG150604UP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150612UP KC5010 » 12.70 15.50 1.20 6.35 5.16
    DNMG-UP

  7. RCMT-RP

    Positive ISO insert for Rough machining.

    Product Code D S D1  
    RCMT1204M0RP KCK15 » 12.00 4.76 4.40
    RCMT1204M0RP KCK20 » 12.00 4.76 4.40
    RCMT1606M0RP KCK15 » 16.00 6.35 5.50
    RCMT2006M0RP KCK20 » 20.00 6.35 6.50
    RCMT-RP

  8. RNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D S D1  
    RNMG120400UN KCK05 » 12.70 4.76 5.16
    RNMG120400UN KCK15 » 12.70 4.76 5.16
    RNMG120400UN KCK15B » 12.70 4.76 5.16
    RNMG120400UN KCK20 » 12.70 4.76 5.16
    RNMG-UN

  9. SNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG120408RP KCK05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCK15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCK20 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412RP KCK05 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCK15 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCK15B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCK20 » 12.70 12.70 1.20 4.76 5.16
    SNMG120416RP KCK20 » 12.70 12.70 1.60 4.76 5.16
    SNMG150612RP KCK15 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCK15B » 15.88 15.88 1.20 6.35 6.35
    SNMG150616RP KCK20 » 15.88 15.88 1.60 6.35 6.35
    SNMG190612RP KCK20 » 19.05 19.05 1.20 6.35 7.93
    SNMG190616RP KCK20 » 19.05 19.05 1.60 6.35 7.93
    SNMG-RP

  10. SNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG120408UN KCK05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UN KCK15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UN KCK15B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UN KCK20 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412UN KCK05 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412UN KCK15 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412UN KCK15B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412UN KCK20 » 12.70 12.70 1.20 4.76 5.16
    SNMG120416UN KCK05 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416UN KCK15 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416UN KCK20 » 12.70 12.70 1.60 4.76 5.16
    SNMG150612UN KCK05 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612UN KCK15 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612UN KCK15B » 15.88 15.88 1.20 6.35 6.35
    SNMG150612UN KCK20 » 15.88 15.88 1.20 6.35 6.35
    SNMG150616UN KCK05 » 15.88 15.88 1.60 6.35 6.35
    SNMG150616UN KCK15 » 15.88 15.88 1.60 6.35 6.35
    SNMG150616UN KCK15B » 15.88 15.88 1.60 6.35 6.35
    SNMG150616UN KCK20 » 15.88 15.88 1.60 6.35 6.35
    SNMG190612UN KCK05 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612UN KCK15 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612UN KCK15B » 19.05 19.05 1.20 6.35 7.93
    SNMG190612UN KCK20 » 19.05 19.05 1.20 6.35 7.93
    SNMG190616UN KCK05 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616UN KCK15 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616UN KCK20 » 19.05 19.05 1.60 6.35 7.93
    SNMG-UN

  11. SNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG150612UP KC5010 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612UP KCU10 » 15.88 15.88 1.20 - -
    SNMG-UP

  12. TNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408RP KCK05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK15B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCK20 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCU10 » 9.53 16.50 0.80 - -
    TNMG160408RP KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412RP KCK20 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCU25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160416RP KCK20 » 9.53 16.50 1.60 4.76 3.81
    TNMG220408RP KCK15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCK20 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCU10 » 12.70 22.00 0.80 - -
    TNMG220408RP KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220412RP KCK15 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCK15B » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCK20 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCU10 » 12.70 22.00 1.20 - -
    TNMG220412RP KCU25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220416RP KCK15 » 12.70 22.00 1.59 4.76 5.16
    TNMG220416RP KCK20 » 12.70 22.00 1.59 4.76 5.16
    TNMG220416RP KCU25 » 12.70 22.00 1.59 4.76 5.16
    TNMG220432RP KCK20 » 12.70 22.00 3.18 4.76 5.16
    TNMG220432RP KCU10 » 12.70 22.00 3.18 - -
    TNMG270612RP KCK20 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RP KCU10 » 15.88 27.50 1.20 - -
    TNMG270612RP KCU25 » 15.88 27.50 1.20 6.35 6.35
    TNMG270616RP KCK20 » 15.88 27.50 1.60 6.35 6.35
    TNMG330924RP KCK20 » 19.05 33.00 2.40 9.53 7.93
    TNMG330924RP KCU10 » 19.05 33.00 2.40 - -
    TNMG-RP

  13. TNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408UN KCK05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408UN KCK15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408UN KCK15B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408UN KCK20 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412UN KCK05 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412UN KCK15 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412UN KCK15B » 9.53 16.50 1.20 4.76 3.81
    TNMG160412UN KCK20 » 9.53 16.50 1.20 4.76 3.81
    TNMG160416UN KCK05 » 9.53 16.50 1.60 4.76 3.81
    TNMG160416UN KCK15 » 9.53 16.50 1.60 4.76 3.81
    TNMG160416UN KCK20 » 9.53 16.50 1.60 4.76 3.81
    TNMG220408UN KCK05 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UN KCK15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UN KCK15B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UN KCK20 » 12.70 22.00 0.80 4.76 5.16
    TNMG220412UN KCK05 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412UN KCK15 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412UN KCK20 » 12.70 22.00 1.20 4.76 5.16
    TNMG220416UN KCK15 » 12.70 22.00 1.60 4.76 5.16
    TNMG220416UN KCK20 » 12.70 22.00 1.60 4.76 5.16
    TNMG-UN

  14. TNMG-RM

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG330924RM KCU10 » 19.05 32.99 2.40 9.53 7.93
    TNMG-RM

  15. VNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160404UN KCK05 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404UN KCK15 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404UN KCK15B » 9.53 16.61 0.40 4.76 3.81
    VNMG160404UN KCK20 » 9.53 16.61 0.40 4.76 3.81
    VNMG160408UN KCK05 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408UN KCK15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408UN KCK15B » 9.53 16.61 0.80 4.76 3.81
    VNMG160408UN KCK20 » 9.53 16.61 0.80 4.76 3.81
    VNMG-UN

  16. VNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε  
    VNMG160404UP KCU10 » 9.53 16.61 0.40
    VNMG160408UP KCU10 » 9.53 16.61 0.80
    VNMG-UP

  17. VNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160408RP KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCK15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCK20 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408RP KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160412RP KCK05 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCK15 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCK15B » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCK20 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCU10 » 9.53 16.61 1.20 - -
    VNMG160412RP KCU25 » 9.53 16.61 1.20 4.76 3.81
    VNMG-RP

  18. WNMG-UN

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG060404UN KCK05 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404UN KCK15 » 9.53 6.52 0.40 4.76 3.81
    WNMG060404UN KCK20 » 9.53 6.52 0.40 4.76 3.81
    WNMG060408UN KCK05 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408UN KCK15 » 9.53 6.52 0.80 4.76 3.81
    WNMG-UN

  19. WNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG060408RP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCK20 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408RP KCU25 » 9.53 6.52 0.80 4.76 3.81
    WNMG-RP

Items 1 to 250 of 287 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Cast Iron Remove This Item
  2. Type of Cut: Rough Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (287)
ISO Insert Range
  1. Beyond Premium (287)
Material Machining
  1. Steel (470)
  2. Stainless Steel (195)
  3. Aluminium (6)
  4. HRSA (62)
  5. Universal (54)
Insert Type
  1. Negative (283)
  2. Positive (4)
Type of Cut
  1. Fine Finishing (8)
  2. Finishing (843)
  3. Wiper Finishing (53)
  4. Medium (353)
  5. Wiper Medium (16)
  6. Rough Positive (38)
Tip Style
  1. CNMA (10)
  2. CNMG (39)
  3. DNMA (8)
  4. DNMG (64)
  5. RCMT (4)
  6. RNMG (4)
  7. SNMG (41)
  8. TNMG (50)
  9. VNMG (21)
  10. WNMG (46)
Radius°
  1. 0.40 (19)
  2. 0.80 (102)
  3. 1.20 (100)
  4. 1.60 (52)
  5. 2.40 (3)
  6. 3.20 (2)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...