GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

195 Item(s)

per page

Set Descending Direction

  1. CNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    CNMG120404UP KCM15 » 12.70 12.90 0.40 4.76 5.16
    CNMG120404UP KCM25 » 12.70 12.90 0.40 4.76 5.16
    CNMG120408UP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UP KCM25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408UP KCM35 » 12.70 12.90 0.80 4.76 5.16
    CNMG120412UP KCM15 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UP KCM25 » 12.70 12.90 1.20 4.76 5.16
    CNMG120412UP KCM35 » 12.70 12.90 1.20 4.76 5.16
    CNMG160608UP KCM15 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UP KCM25 » 15.88 16.12 0.80 6.35 6.35
    CNMG160608UP KCM35 » 15.88 16.12 0.80 6.35 6.35
    CNMG160612UP KCM15 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UP KCM25 » 15.88 16.12 1.20 6.35 6.35
    CNMG160612UP KCM35 » 15.88 16.12 1.20 6.35 6.35
    CNMG190608UP KCM15 » 19.05 19.34 0.80 6.35 7.93
    CNMG190608UP KCM25 » 19.05 19.34 0.80 6.35 7.93
    CNMG190612UP KCM15 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UP KCM25 » 19.05 19.34 1.20 6.35 7.93
    CNMG190612UP KCM35 » 19.05 19.34 1.20 6.35 7.93
    CNMG190616UP KCM15 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616UP KCM25 » 19.05 19.34 1.60 6.35 7.93
    CNMG190616UP KCM35 » 19.05 19.34 1.60 6.35 7.93
    CNMG-UP

  2. DNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408RP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408RP KCU10 » 9.53 11.63 0.80 - -
    DNMG110408RP KCU25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110412RP KCM15 » 9.53 11.63 1.20 4.76 3.81
    DNMG150408RP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150412RP KCM25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCM35 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412RP KCU10 » 12.70 15.50 1.20 - -
    DNMG150416RP KCU10 » 12.70 15.50 1.60 - -
    DNMG150608RP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608RP KCU10 » 12.70 15.50 0.80 - -
    DNMG150612RP KCM15 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCM25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCM35 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612RP KCU10 » 12.70 15.50 1.20 - -
    DNMG-RP

  3. DNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    DNMG110408UP KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM15 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCM25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408UP KCU10 » 9.53 11.63 0.80 - -
    DNMG110412UP KC5010 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UP KCM15 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412UP KCM25 » 9.53 11.63 1.20 4.76 3.81
    DNMG150404UP KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCM15 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCM25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404UP KCU10 » 12.70 15.50 0.40 - -
    DNMG150408UP KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM15 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCM35 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150412UP KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCM15 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCM25 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCM35 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412UP KCU10 » 12.70 15.50 1.20 - -
    DNMG150604UP KC5010 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604UP KCM15 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604UP KCM25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608UP KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM15 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCM35 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608UP KCU10 » 12.70 15.50 0.80 - -
    DNMG150612UP KC5010 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612UP KCM15 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612UP KCM25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612UP KCM35 » 12.70 15.50 1.20 6.35 5.16
    DNMG-UP

  4. RCMT-RP

    Positive ISO insert for Rough machining.

    Product Code D S D1  
    RCMT2006M0RP KCM25 » 20.00 6.35 6.50
    RCMT-RP

  5. SNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG120408RP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408RP KCM35 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412RP KCM15 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCM25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412RP KCM35 » 12.70 12.70 1.20 4.76 5.16
    SNMG150612RP KCM15 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCM25 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612RP KCM35 » 15.88 15.88 1.20 6.35 6.35
    SNMG150616RP KCM15 » 15.88 15.88 1.60 6.35 6.35
    SNMG150616RP KCM25 » 15.88 15.88 1.60 6.35 6.35
    SNMG190612RP KCM15 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RP KCM25 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612RP KCM35 » 19.05 19.05 1.20 6.35 7.93
    SNMG190616RP KCM25 » 19.05 19.05 1.60 6.35 7.93
    SNMG190616RP KCM35 » 19.05 19.05 1.60 6.35 7.93
    SNMG-RP

  6. SNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    SNMG120408UP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UP KCM25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408UP KCM35 » 12.70 12.70 0.80 4.76 5.16
    SNMG120412UP KCM15 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412UP KCM25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412UP KCM35 » 12.70 12.70 1.20 4.76 5.16
    SNMG120416UP KCM15 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416UP KCM25 » 12.70 12.70 1.60 4.76 5.16
    SNMG120416UP KCM35 » 12.70 12.70 1.60 4.76 5.16
    SNMG150612UP KC5010 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612UP KCM15 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612UP KCM25 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612UP KCM35 » 15.88 15.88 1.20 6.35 6.35
    SNMG150612UP KCU10 » 15.88 15.88 1.20 - -
    SNMG190612UP KCM15 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612UP KCM25 » 19.05 19.05 1.20 6.35 7.93
    SNMG190612UP KCM35 » 19.05 19.05 1.20 6.35 7.93
    SNMG-UP

  7. TNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160404UP KCM15 » 9.53 16.50 0.40 4.76 3.81
    TNMG160404UP KCM25 » 9.53 16.50 0.40 4.76 3.81
    TNMG160408UP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408UP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412UP KCM15 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412UP KCM25 » 9.53 16.50 1.20 4.76 3.81
    TNMG220408UP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408UP KCM35 » 12.70 22.00 0.80 4.76 5.16
    TNMG220412UP KCM15 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412UP KCM25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412UP KCM35 » 12.70 22.00 1.20 4.76 5.16
    TNMG-UP

  8. TNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG160408RP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCM25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408RP KCU10 » 9.53 16.50 0.80 - -
    TNMG160408RP KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160412RP KCM25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCM35 » 9.53 16.50 1.20 4.76 3.81
    TNMG160412RP KCU25 » 9.53 16.50 1.20 4.76 3.81
    TNMG160416RP KCM25 » 9.53 16.50 1.60 4.76 3.81
    TNMG220408RP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCM25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408RP KCU10 » 12.70 22.00 0.80 - -
    TNMG220408RP KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220412RP KCM15 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCM25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220412RP KCU10 » 12.70 22.00 1.20 - -
    TNMG220412RP KCU25 » 12.70 22.00 1.20 4.76 5.16
    TNMG220416RP KCM25 » 12.70 22.00 1.59 4.76 5.16
    TNMG220416RP KCU25 » 12.70 22.00 1.59 4.76 5.16
    TNMG220432RP KCU10 » 12.70 22.00 3.18 - -
    TNMG270612RP KCM15 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RP KCM25 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RP KCM35 » 15.88 27.50 1.20 6.35 6.35
    TNMG270612RP KCU10 » 15.88 27.50 1.20 - -
    TNMG270612RP KCU25 » 15.88 27.50 1.20 6.35 6.35
    TNMG270616RP KCM15 » 15.88 27.50 1.60 6.35 6.35
    TNMG270616RP KCM25 » 15.88 27.50 1.60 6.35 6.35
    TNMG270616RP KCM35 » 15.88 27.50 1.60 6.35 6.35
    TNMG330924RP KCM25 » 19.05 33.00 2.40 9.53 7.93
    TNMG330924RP KCU10 » 19.05 33.00 2.40 - -
    TNMG-RP

  9. TNMG-RM

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    TNMG330924RM KCU10 » 19.05 32.99 2.40 9.53 7.93
    TNMG-RM

  10. VNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160404UP KCM15 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404UP KCM25 » 9.53 16.61 0.40 4.76 3.81
    VNMG160404UP KCU10 » 9.53 16.61 0.40 - -
    VNMG160408UP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408UP KCM25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408UP KCU10 » 9.53 16.61 0.80 - -
    VNMG160412UP KCM15 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412UP KCM25 » 9.53 16.61 1.20 4.76 3.81
    VNMG-UP

  11. VNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    VNMG160408RP KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408RP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408RP KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160412RP KCM15 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCM25 » 9.53 16.61 1.20 4.76 3.81
    VNMG160412RP KCU10 » 9.53 16.61 1.20 - -
    VNMG160412RP KCU25 » 9.53 16.61 1.20 4.76 3.81
    VNMG-RP

  12. WNMG-RP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG060408RP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCM25 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408RP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408RP KCU25 » 9.53 6.52 0.80 4.76 3.81
    WNMG080408RP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCM35 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408RP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408RP KCU25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080412RP KCM15 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCM25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCM35 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412RP KCU10 » 12.70 8.69 1.20 - -
    WNMG080412RP KCU25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080416RP KCU10 » - - - - -
    WNMG080416RP KCU25 » 12.70 8.69 1.60 4.76 5.16
    WNMG-RP

  13. WNMG-UP

    Negative ISO insert for Rough machining.

    Product Code D L10 Rε S D1  
    WNMG060408UP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408UP KCM25 » 9.53 6.52 0.80 4.76 3.81
    WNMG080408UP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408UP KCM25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408UP KCM35 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408UP KCU10 » 12.70 8.69 0.80 - -
    WNMG080412UP KCM15 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412UP KCM25 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412UP KCM35 » 12.70 8.69 1.20 4.76 5.16
    WNMG080412UP KCU10 » 12.70 8.69 1.20 - -
    WNMG-UP

195 Item(s)

per page

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Stainless Steel Remove This Item
  2. Type of Cut: Rough Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (195)
ISO Insert Range
  1. Beyond Premium (195)
Material Machining
  1. Steel (470)
  2. Cast Iron (287)
  3. Aluminium (6)
  4. HRSA (62)
  5. Universal (54)
Insert Type
  1. Negative (194)
  2. Positive (1)
Type of Cut
  1. Fine Finishing (8)
  2. Finishing (832)
  3. Wiper Finishing (41)
  4. Medium (354)
  5. Wiper Medium (11)
  6. Rough Positive (39)
  7. Rough Single Sided (32)
Tip Style
  1. CNMG (22)
  2. DNMG (53)
  3. RCMT (1)
  4. SNMG (33)
  5. TNMG (42)
  6. VNMG (16)
  7. WNMG (28)
Radius°
  1. 0.40 (14)
  2. 0.80 (76)
  3. 1.20 (81)
  4. 1.60 (18)
  5. 2.40 (3)
  6. 3.20 (1)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...