GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

120 Item(s)

per page

Set Descending Direction

  1. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404CT KC5010 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG150404CT KC5010 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404CT KCU10 » 12.70 15.50 0.40 - -
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG150412CT KC5010 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412CT KCU10 » 12.70 15.50 1.20 - -
    DNMG150604CT KC5010 » 12.70 15.50 0.34 6.35 5.16
    DNMG150604CT KCP10 » 12.70 15.50 0.34 6.35 5.16
    DNMG150608CT KC5010 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP05 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP10B » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCP25 » 12.70 15.50 0.74 6.35 5.16
    DNMG150608CT KCU10 » 12.70 15.50 0.74 - -
    DNMG150612CT KC5010 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP05 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP10B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP25 » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCP25B » 12.70 15.50 1.14 6.35 5.16
    DNMG150612CT KCU10 » 12.70 15.50 1.14 - -
    DNMG-CT

  2. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FF KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FF KCU10 » 9.53 11.63 0.40 - -
    DNMG110404FF KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408FF KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCU10 » 9.53 11.63 0.80 - -
    DNMG110408FF KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG150404FF KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150404FF KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408FF KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150408FF KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150604FF KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FF KCU10 » 12.70 15.50 0.40 - -
    DNMG150604FF KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608FF KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150608FF KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FF

  3. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110404FN KCK05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP05 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP10B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25 » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KCP25B » 9.53 11.63 0.40 4.76 3.81
    DNMG110404FN KT315 » 9.53 11.63 0.40 4.76 3.81
    DNMG110408FN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG110412FN KCP05 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412FN KCP10 » 9.53 11.63 1.20 4.76 3.81
    DNMG110412FN KT315 » 9.53 11.63 1.20 4.76 3.81
    DNMG150404FN KCK05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP05 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP10B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25 » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KCP25B » 12.70 15.50 0.40 4.76 5.16
    DNMG150404FN KT315 » 12.70 15.50 0.40 4.76 5.16
    DNMG150408FN KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150412FN KCK05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP05 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10 » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KCP10B » 12.70 15.50 1.20 4.76 5.16
    DNMG150412FN KT315 » 12.70 15.50 1.20 4.76 5.16
    DNMG150604FN KCK05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP05 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP10B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25 » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KCP25B » 12.70 15.50 0.40 6.35 5.16
    DNMG150604FN KT315 » 12.70 15.50 0.40 6.35 5.16
    DNMG150608FN KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG150612FN KCK05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP05 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP10B » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KCP25 » 12.70 15.50 1.20 6.35 5.16
    DNMG150612FN KT315 » 12.70 15.50 1.20 6.35 5.16
    DNMG-FN

120 Item(s)

per page

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Type of Cut: Finishing Remove This Item
  2. Tip Style: DNMG Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (120)
ISO Insert Range
  1. Beyond Premium (120)
Material Machining
  1. Steel (113)
  2. Stainless Steel (19)
  3. Cast Iron (26)
  4. HRSA (19)
  5. Universal (19)
Insert Type
  1. Negative (120)
Type of Cut
  1. Wiper Finishing (32)
  2. Medium (126)
  3. Wiper Medium (18)
  4. Rough (178)
Tip Style
  1. CCGT (58)
  2. CCMT (178)
  3. CCMW (5)
  4. CDG (6)
  5. CDHBS (21)
  6. CDHHS (18)
  7. CDT (2)
  8. CNGG (30)
  9. CNGP (19)
  10. CNMA (8)
  11. CNMG (62)
  12. CPG (2)
  13. CPGH (22)
  14. CPGT (32)
  15. CPMT (121)
  16. DCGT (26)
  17. DCMT (149)
  18. DNGG (23)
  19. DNGP (17)
  20. DNMA (5)
  21. DPGT (48)
  22. DPMT (59)
  23. RCGT (12)
  24. SCMT (90)
  25. SNGG (7)
  26. SNGP (4)
  27. SNMG (41)
  28. SPGT (4)
  29. SPMT (28)
  30. TCGT (28)
  31. TCMT (197)
  32. TDHB (18)
  33. TDHH (14)
  34. TNGG (8)
  35. TNGP (5)
  36. TNMG (73)
  37. TPCB (11)
  38. TPCG (7)
  39. TPCH (4)
  40. TPGH (10)
  41. TPGT (45)
  42. TPMT (124)
  43. VBGT (39)
  44. VBMT (109)
  45. VNGG (23)
  46. VNGP (9)
  47. VNMG (28)
  48. WCMT (10)
  49. WNGG (9)
  50. WNMG (39)
  51. WPGT (3)
  52. WPGTS (4)
  53. WPMT (30)
  54. WPMTS (4)
Radius°
  1. 0.34 (2)
  2. 0.40 (41)
  3. 0.74 (6)
  4. 0.80 (46)
  5. 1.14 (7)
  6. 1.20 (18)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...