GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Items 501 to 750 of 1427 total

per page
Page:
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5

Set Ascending Direction

  1. TCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T304LF KCP25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCP10B » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCP10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KCP05 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KC5025 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304LF KC5010 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T302LF KC5025 » 9.53 16.50 0.20 3.97 4.40
    TCMT16T302LF KC5010 » 9.53 16.50 0.20 3.97 4.40
    TCMT110208LF KT315 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCP30 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCP25B » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCP25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCP10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KCP05 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KC5025 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208LF KC5010 » 6.35 11.00 0.80 2.38 2.80
    TCMT110204LF KT315 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP30 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP25B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP10B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KCP05 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KC5025 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204LF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT110202LF KC5025 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202LF KC5010 » 6.35 11.00 0.20 2.38 2.90
    TCMT-LF

  2. TCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT16T304FP KTP10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCP25 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCP10 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T304FP KCP05 » 9.53 16.50 0.40 3.97 4.40
    TCMT16T302FP KTP10 » 9.53 16.50 0.20 3.97 4.40
    TCMT16T302FP KCU25 » 9.53 16.50 0.20 3.97 4.40
    TCMT16T302FP KCU10 » 9.53 16.50 0.20 3.97 4.40
    TCMT110312FP KCU10 » 6.35 11.00 1.20 3.18 2.80
    TCMT110312FP KCP05 » 6.35 11.00 1.20 3.18 2.80
    TCMT110308FP KCU25 » 6.35 11.00 0.80 3.18 2.80
    TCMT110308FP KCU10 » 6.35 11.00 0.80 3.18 2.80
    TCMT110308FP KCP05 » 6.35 11.00 0.80 3.18 2.80
    TCMT110304FP KCU25 » 6.35 11.00 0.40 3.18 2.80
    TCMT110304FP KCU10 » 6.35 11.00 0.40 3.18 2.80
    TCMT110304FP KCP05 » 6.35 11.00 0.40 3.18 2.80
    TCMT110208FP KTP10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCP25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208FP KCP10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110204FP KTP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204FP KCP05 » 6.35 11.00 0.40 2.38 2.80
    TCMT110202FP KTP10 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202FP KCU25 » 6.35 11.00 0.20 2.38 2.90
    TCMT110202FP KCU10 » 6.35 11.00 0.20 2.38 2.90
    TCMT090208FP KCU25 » 5.56 9.63 0.80 2.38 2.50
    TCMT090208FP KCU10 » 5.56 9.63 0.80 2.38 2.50
    TCMT090204FP KCU25 » 5.56 9.63 0.40 2.38 2.50
    TCMT090204FP KCU10 » 5.56 9.63 0.40 2.38 2.50
    TCMT-FP

  3. TCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208UF KCP25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208UF KCP10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208UF KC5010 » 6.35 11.00 0.80 2.38 2.80
    TCMT110204UF KCP25 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204UF KCP10B » 6.35 11.00 0.40 2.38 2.80
    TCMT110204UF KCP10 » 6.35 11.00 0.40 2.38 2.80
    TCMT110204UF KC5010 » 6.35 11.00 0.40 2.38 2.80
    TCMT-UF

  4. TCMT-MP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208MP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208MP KCP25 » 6.35 11.00 0.80 2.38 2.80
    TCMT-MP

  5. TCMT-MF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCMT110208MF KCP25B » 6.35 11.00 0.80 2.38 2.80
    TCMT110208MF KCP25 » 6.35 11.00 0.80 2.38 2.80
    TCMT110208MF KCP10 » 6.35 11.00 0.80 2.38 2.80
    TCMT-MF

  6. TCGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T308LF KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T304LF KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T302LF KCU10 » 9.53 16.50 0.20 3.97 4.40
    TCGT110204LF KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT110201LF KCU10 » 6.35 11.00 0.10 2.38 2.80
    TCGT-LF

  7. TCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT16T308HP KCU25 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T308HP KCU10 » 9.53 16.50 0.80 3.97 4.40
    TCGT16T304HP KCU25 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T304HP KCU10 » 9.53 16.50 0.40 3.97 4.40
    TCGT16T302HP KCU25 » 9.53 16.50 0.20 3.97 4.40
    TCGT16T302HP KCU10 » 9.53 16.50 0.20 3.97 4.40
    TCGT110208HP KCU25 » 6.35 11.00 0.80 2.38 2.80
    TCGT110208HP KCU10 » 6.35 11.00 0.80 2.38 2.80
    TCGT110204HP KCU25 » 6.35 11.00 0.40 2.38 2.80
    TCGT110204HP KCU10 » 6.35 11.00 0.40 2.38 2.80
    TCGT110202HP KCU25 » 6.35 11.00 0.20 2.38 2.80
    TCGT110202HP KCU10 » 6.35 11.00 0.20 2.38 2.80
    TCGT-HP

  8. TCGT

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TCGT06T10411 KT325 » 6.35 11.00 0.10 2.38 2.80
    TCGT06T10211 KT325 » 6.35 11.00 0.10 2.38 2.80
    TCGT

  9. SPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T308LF KT315 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP25B » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP10B » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308LF KCP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T304LF KT315 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304LF KCP25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304LF KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT-LF

  10. SPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T308FP KTP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCP25 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCP10 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T308FP KCP05 » 9.53 9.53 0.80 3.97 4.40
    SPMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCP25 » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304FP KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT-FP

  11. SPMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SPMT09T304UF KCP10B » 9.53 9.53 0.40 3.97 4.40
    SPMT09T304UF KCP10 » 9.53 9.53 0.40 3.97 4.40
    SPMT-UF

  12. SPGT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε  
    SPGT09T308LF KCU10 » 9.53 9.53 0.80
    SPGT09T304LF KCU10 » 9.53 9.53 0.40
    SPGT-LF

  13. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120416FN KCP10 » 12.70 12.70 1.60 4.76 5.16
    SNMG120412FN KT315 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP25 » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP10B » 12.70 12.70 1.20 4.76 5.16
    SNMG120412FN KCP10 » 12.70 12.70 1.20 4.76 5.16
    SNMG120408FN KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP25B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP10B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120404FN KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10B » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FN KCP05 » 12.70 12.70 0.40 4.76 5.16
    SNMG090308FN KCP25 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FN KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090304FN KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP25 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FN KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG-FN

  14. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120408FP KCU10 » 12.70 12.70 0.80 - -
    SNMG120404FP KCU10 » 12.70 12.70 0.40 - -
    SNMG120404FP KC5010 » 12.70 12.70 0.40 4.76 5.16
    SNMG-FP

  15. SNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120408FF KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FF KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120404FF KT315 » 12.70 12.70 0.40 4.76 5.16
    SNMG120404FF KCP10 » 12.70 12.70 0.40 4.76 5.16
    SNMG090308FF KT315 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FF KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090304FF KT315 » 9.53 9.53 0.40 3.18 3.81
    SNMG090304FF KCP10 » 9.53 9.53 0.40 3.18 3.81
    SNMG-FF

  16. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP120404 KCU10 » 12.70 12.70 0.40 - -
    SNGP

  17. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG150612LF KCU10 » 15.88 15.88 1.20 - -
    SNGG150612LF KC5010 » 15.88 15.88 1.20 6.35 6.35
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG-LF

  18. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG-FS

  19. SCMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT120412LF KCP25B » 12.70 12.70 1.20 4.76 5.50
    SCMT120412LF KCP25 » 12.70 12.70 1.20 4.76 5.50
    SCMT120412LF KCP10B » 12.70 12.70 1.20 4.76 5.50
    SCMT120412LF KCP10 » 12.70 12.70 1.20 4.76 5.50
    SCMT120408LF KT315 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCP30 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCP25B » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCP25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCP10B » 12.70 12.70 0.80 4.76 5.50
    SCMT120408LF KCP10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120404LF KCP30 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404LF KCP25 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404LF KCP10 » 12.70 12.70 0.40 4.76 5.50
    SCMT09T308LF KCP30 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCP25B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCP25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCP10B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCP10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308LF KCP05 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T304LF KT315 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP30 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP25B » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP10B » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP10 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304LF KCP05 » 9.53 9.53 0.40 3.97 4.40
    SCMT-LF

  20. SCMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT120412FP KCU10 » 12.70 12.70 1.20 4.76 5.50
    SCMT120412FP KCP25 » 12.70 12.70 1.20 4.76 5.50
    SCMT120412FP KCP10 » 12.70 12.70 1.20 4.76 5.50
    SCMT120408FP KCU25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCU10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCP25B » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCP25 » 12.70 12.70 0.80 4.76 5.50
    SCMT120408FP KCP10 » 12.70 12.70 0.80 4.76 5.50
    SCMT120404FP KCU25 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404FP KCU10 » 12.70 12.70 0.40 4.76 5.50
    SCMT120404FP KCP25 » 12.70 12.70 0.40 4.76 5.50
    SCMT09T308FP KTP10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCU25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCU10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCP25B » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCP25 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308FP KCP10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T304FP KCU25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCU10 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCP25 » 9.53 9.53 0.40 3.97 4.40
    SCMT09T304FP KCP10 » 9.53 9.53 0.40 3.97 4.40
    SCMT-FP

  21. SCMT

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT12040811 KT315 » 12.70 12.70 0.80 4.76 5.50
    SCMT12040411 KT315 » 12.70 12.70 0.40 4.76 5.50
    SCMT09T30811 KT325 » 9.53 9.53 0.80 - -
    SCMT09T30811 KT315 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T30411 KT325 » 9.53 9.53 0.40 - -
    SCMT09T30411 KT315 » 9.53 9.53 0.40 3.97 4.40
    SCMT

  22. SCMT-UF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SCMT09T308UF KCP10 » 9.53 9.53 0.80 3.97 4.40
    SCMT09T308UF KCP05 » 9.53 9.53 0.80 3.97 4.40
    SCMT-UF

  23. RCGT-HP

    Positive ISO insert for Finishing machining.

    Product Code D S D1  
    RCGT1204M0HP KCU25 » 12.00 4.76 4.40
    RCGT1204M0HP KCU10 » 12.00 4.76 4.40
    RCGT10T3M0HP KCU25 » 10.00 3.97 4.40
    RCGT10T3M0HP KCU10 » 10.00 3.97 4.40
    RCGT0803M0HP KCU25 » 8.00 3.18 3.40
    RCGT0803M0HP KCU10 » 8.00 3.18 3.40
    RCGT-HP

  24. DPMT-LF

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T308LF KCP30 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP25B » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP10B » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308LF KCP05 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T304LF KT315 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP30 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP25B » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP10B » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304LF KCP05 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T302LF KT315 » 9.53 11.63 0.20 3.97 4.40
    DPMT070204LF KT315 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP30 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP25B » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP25 » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP10B » 6.35 7.75 0.40 2.38 2.80
    DPMT070204LF KCP10 » 6.35 7.75 0.40 2.38 2.80
    DPMT-LF

  25. DPMT-FP

    Positive ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DPMT11T308FP KTP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCU10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCP25 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T308FP KCP10 » 9.53 11.63 0.80 3.97 4.40
    DPMT11T304FP KTP10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCU25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCU10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCP25 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T304FP KCP10 » 9.53 11.63 0.40 3.97 4.40
    DPMT11T302FP KCU25 » 9.53 11.63 0.20 3.97 4.40
    DPMT11T302FP KCU10 » 9.53 11.63 0.20 3.97 4.40
    DPMT070208FP KCU25 » 6.35 7.75 0.80 2.38 2.80
    DPMT070208FP KCU10 » 6.35 7.75 0.80 2.38 2.80
    DPMT-FP

Items 501 to 750 of 1427 total

per page
Page:
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5

Set Ascending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Material Machining: Steel Remove This Item
  2. Type of Cut: Finishing Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (1427)
ISO Insert Range
  1. Beyond Premium (1427)
Material Machining
  1. Stainless Steel (832)
  2. Cast Iron (843)
  3. Aluminium (100)
  4. HRSA (729)
  5. Universal (621)
Insert Type
  1. Negative (393)
  2. Positive (1034)
Type of Cut
  1. Fine Finishing (19)
  2. Wiper Finishing (134)
  3. Medium (575)
  4. Wiper Medium (75)
  5. Rough Positive (63)
  6. Rough (470)
  7. Rough Single Sided (242)
Tip Style
  1. CCGT (34)
  2. CCMT (114)
  3. CDG (6)
  4. CDHBS (15)
  5. CDHHS (18)
  6. CDT (2)
  7. CNGG (17)
  8. CNGP (4)
  9. CNMG (51)
  10. CPG (2)
  11. CPGH (21)
  12. CPGT (20)
  13. CPMT (78)
  14. DCGT (15)
  15. DCMT (105)
  16. DNGG (11)
  17. DNGP (12)
  18. DNMG (113)
  19. DPGT (32)
  20. DPMT (41)
  21. RCGT (6)
  22. SCMT (55)
  23. SNGG (7)
  24. SNGP (2)
  25. SNMG (31)
  26. SPGT (2)
  27. SPMT (20)
  28. TCGT (19)
  29. TCMT (125)
  30. TDHB (18)
  31. TDHH (14)
  32. TNGG (6)
  33. TNGP (2)
  34. TNMG (59)
  35. TPCB (11)
  36. TPCG (7)
  37. TPCH (4)
  38. TPGH (10)
  39. TPGT (29)
  40. TPMT (79)
  41. VBGT (25)
  42. VBMT (69)
  43. VNGG (12)
  44. VNGP (4)
  45. VNMG (24)
  46. WCMT (10)
  47. WNGG (8)
  48. WNMG (30)
  49. WPGT (3)
  50. WPGTS (4)
  51. WPMT (17)
  52. WPMTS (4)
Radius°
  1. 0.05 (10)
  2. 0.10 (37)
  3. 0.20 (185)
  4. 0.34 (2)
  5. 0.40 (555)
  6. 0.74 (6)
  7. 0.80 (511)
  8. 1.14 (7)
  9. 1.20 (84)
  10. 1.60 (4)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...