GBP
  • GBP
  • EUR
  • USD
Exc. VAT
  • Exc. VAT
  • Inc. VAT
Worldwide Shipping

ISO Beyond Inserts

View Cutting Data &
Chipbreaker Geometry »

Inserts for Every Turning Operation

Kennametal, the trusted innovator in metalcutting technology, offers a complete range of indexable inserts for general turning operations. From roughing to finishing, Kennametal has the correct insert.

Plus, Kennametal offers the next generation in tooling with Beyond™. Harnessing advanced science and exceptional experience, our Beyond inserts deliver unparalleled levels of productivity, efficiency, dependability, and profitability.

Features and Benefits

Up to 30% Higher Productivity and Profitability

  • Achieve higher metal removal rates
    (speed, feed, and depth of cut).
  • Gain longer tool life.

Reliability

  • Deliver uniform wear for predictable tool life.
  • Achieve reduced depth-of-cut notching.
  • Virtually eliminate chip flow damage.

Versatility

  • Products can be applied across a wide range of applications.
  • Can be used in low- to high-speed applications.

Complete Portfolio

  • The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

203 Item(s)

per page

Set Descending Direction

  1. CNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408FS K313 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408FS KCU25 » 12.70 12.90 0.80 4.76 5.16
    CNGG-FS

  2. CNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGG120408LF KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KC730 » 12.70 12.90 0.80 4.76 5.16
    CNGG120408LF KCU10 » 12.70 12.90 0.80 - -
    CNGG160608LF KC5010 » 15.88 16.12 0.80 6.35 6.35
    CNGG160608LF KCU10 » 15.88 16.12 0.80 - -
    CNGG-LF

  3. CNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNGP120408 K10U » 12.70 12.90 0.80 - -
    CNGP120408 K313 » 12.70 12.90 0.80 4.76 5.16
    CNGP120408 KC5410 » 12.70 12.90 0.80 4.76 5.16
    CNGP120408 KCU10 » 12.70 12.90 0.80 - -
    CNGP

  4. CNMA

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMA120408 KCK05 » 12.70 12.90 0.80 4.76 5.16
    CNMA190608 KCK05 » 19.05 19.34 0.80 6.35 7.93
    CNMA

  5. CNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG090308FN KCK05 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FN KCP10 » 9.53 9.67 0.80 3.18 3.81
    CNMG090308FN KT315 » 9.53 9.67 0.80 3.18 3.81
    CNMG120408FN KCK05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FN KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG-FN

  6. CNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408CT KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP05 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408CT KCU10 » 12.70 12.90 0.80 - -
    CNMG-CT

  7. CNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    CNMG120408FP KC5010 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCM15 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP10 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP10B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP25 » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCP25B » 12.70 12.90 0.80 4.76 5.16
    CNMG120408FP KCU10 » 12.70 12.90 0.80 - -
    CNMG120408FP KT315 » 12.70 12.90 0.80 4.76 5.16
    CNMG-FP

  8. DNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408FS KC5525 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408FS KCU25 » 12.70 15.50 0.80 4.76 5.16
    DNGG150608FS KC5510 » 12.70 15.50 0.80 6.35 5.16
    DNGG-FS

  9. DNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGG150408LF KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGG150408LF KCU10 » 12.70 15.50 0.80 - -
    DNGG-LF

  10. DNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNGP150408 K313 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNGP150408 KCU10 » 12.70 15.50 0.80 - -
    DNGP150608 K313 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KC5010 » 12.70 15.50 0.80 6.35 5.16
    DNGP150608 KCU10 » 12.70 15.50 0.80 - -
    DNGP

  11. DNMA

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMA110408 KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMA150408 KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMA150608 KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMA

  12. DNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408CT KC5010 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408CT KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG150408CT KC5010 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408CT KCU10 » 12.70 15.50 0.80 - -
    DNMG-CT

  13. DNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FF KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FF KCU10 » 9.53 11.63 0.80 - -
    DNMG110408FF KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408FF KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150408FF KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608FF KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FF KCU10 » 12.70 15.50 0.80 - -
    DNMG150608FF KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FF

  14. DNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    DNMG110408FN KCK05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP05 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP10B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25 » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KCP25B » 9.53 11.63 0.80 4.76 3.81
    DNMG110408FN KT315 » 9.53 11.63 0.80 4.76 3.81
    DNMG150408FN KCK05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP05 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP10B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25 » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KCP25B » 12.70 15.50 0.80 4.76 5.16
    DNMG150408FN KT315 » 12.70 15.50 0.80 4.76 5.16
    DNMG150608FN KCK05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP05 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP10B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25 » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KCP25B » 12.70 15.50 0.80 6.35 5.16
    DNMG150608FN KT315 » 12.70 15.50 0.80 6.35 5.16
    DNMG-FN

  15. SNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308FS KCU10 » 9.53 9.53 0.80 - -
    SNGG090308FS KCU25 » 9.53 9.53 0.80 3.18 3.81
    SNGG120408FS KCU10 » 12.70 12.70 0.80 - -
    SNGG-FS

  16. SNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGG090308LF KC5010 » 9.53 9.53 0.80 3.18 3.81
    SNGG090308LF KCU10 » 9.53 9.53 0.80 - -
    SNGG-LF

  17. SNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNGP120408 KC5410 » 12.70 12.70 0.80 4.76 5.16
    SNGP120408 KCU10 » 12.70 12.70 0.80 4.76 5.16
    SNGP

  18. SNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090308FF KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FF KT315 » 9.53 9.53 0.80 3.18 3.81
    SNMG120408FF KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FF KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG-FF

  19. SNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG090308FN KCK05 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FN KCP10 » 9.53 9.53 0.80 3.18 3.81
    SNMG090308FN KCP25 » 9.53 9.53 0.80 3.18 3.81
    SNMG120408FN KCK05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP05 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP10 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP10B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP25 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KCP25B » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FN KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG-FN

  20. SNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    SNMG120408FP KCM15 » 12.70 12.70 0.80 4.76 5.16
    SNMG120408FP KCU10 » 12.70 12.70 0.80 - -
    SNMG120408FP KT315 » 12.70 12.70 0.80 4.76 5.16
    SNMG-FP

  21. TNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGG160408FS KC5525 » 9.53 16.50 0.80 4.76 3.81
    TNGG160408FS KCU25 » 9.53 16.50 0.80 4.76 3.81
    TNGG220408FS KC5510 » 12.70 22.00 0.80 4.76 5.16
    TNGG220408FS KCU10 » 12.70 22.00 0.80 - -
    TNGG220408FS KCU25 » 12.70 22.00 0.80 4.76 5.16
    TNGG-FS

  22. TNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNGP160408 KC5410 » 9.53 16.50 0.80 4.76 3.81
    TNGP160408 KCU10 » 9.53 16.50 0.80 - -
    TNGP

  23. TNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110308FF KC5010 » 6.35 11.00 0.80 3.18 2.26
    TNMG160408FF KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FF KCU10 » 9.53 16.50 0.80 - -
    TNMG160408FF KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG-FF

  24. TNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG110308FN KCP10 » 6.35 11.00 0.80 3.18 2.26
    TNMG110308FN KCP25 » 6.35 11.00 0.80 3.18 2.26
    TNMG160408FN KCK05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP05 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP10B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP25 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KCP25B » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FN KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG220408FN KCP05 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KCP10 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KCP10B » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KCP25 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FN KT315 » 12.70 22.00 0.80 4.76 5.16
    TNMG-FN

  25. TNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG160408FP KC5010 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KCM15 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KCP10 » 9.53 16.50 0.80 4.76 3.81
    TNMG160408FP KT315 » 9.53 16.50 0.80 4.76 3.81
    TNMG220408FP KC5010 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FP KCM15 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408FP KT315 » 12.70 22.00 0.80 4.76 5.16
    TNMG-FP

  26. TNMG-CT

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    TNMG220408CT KCP10 » 12.70 22.00 0.80 4.76 5.16
    TNMG220408CT KCP10B » 12.70 22.00 0.80 4.76 5.16
    TNMG-CT

  27. VNGG-FS

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160408FS K313 » 9.53 16.61 0.80 4.76 3.81
    VNGG160408FS KCU25 » 9.53 16.61 0.80 4.76 3.81
    VNGG-FS

  28. VNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGG160408LF K313 » 9.53 16.61 0.80 4.76 3.81
    VNGG160408LF KC5010 » 9.53 16.61 0.80 4.76 3.81
    VNGG160408LF KC730 » 9.53 16.61 0.80 4.76 3.81
    VNGG160408LF KCU10 » 9.53 16.61 0.80 - -
    VNGG220408LF KC5010 » 12.70 22.14 0.80 4.76 5.16
    VNGG220408LF KCU10 » 12.70 22.14 0.80 - -
    VNGG-LF

  29. VNGP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNGP220408 K313 » 12.70 22.14 0.80 4.76 5.16
    VNGP220408 KCU10 » 12.70 22.14 0.80 - -
    VNGP

  30. VNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FF KCP05 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FF KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FF KCU10 » 9.53 16.61 0.80 - -
    VNMG160408FF KT315 » 9.53 16.61 0.80 4.76 3.81
    VNMG-FF

  31. VNMG-FN

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FN KCK05 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FN KCP05 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FN KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FN KCP25 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FN KT315 » 9.53 16.61 0.80 4.76 3.81
    VNMG-FN

  32. VNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    VNMG160408FP KCM15 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FP KCP10 » 9.53 16.61 0.80 4.76 3.81
    VNMG160408FP KCU10 » 9.53 16.61 0.80 - -
    VNMG160408FP KT315 » 9.53 16.61 0.80 4.76 3.81
    VNMG-FP

  33. WNGG-LF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNGG080408LF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNGG080408LF KCU10 » 12.70 8.69 0.80 - -
    WNGG-LF

  34. WNMG-FF

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG060408FF KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FF KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FF KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FF KT315 » 9.53 6.52 0.80 4.76 3.81
    WNMG080408FF KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FF KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FF KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FF KT315 » 12.70 8.69 0.80 4.76 5.16
    WNMG-FF

  35. WNMG-FP

    Negative ISO insert for Finishing machining.

    Product Code D L10 Rε S D1  
    WNMG060408FP KC5010 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FP KCM15 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FP KCP10 » 9.53 6.52 0.80 4.76 3.81
    WNMG060408FP KCU10 » 9.53 6.52 0.80 - -
    WNMG060408FP KT315 » 9.53 6.52 0.80 4.76 3.81
    WNMG080408FP KC5010 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCM15 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCP10 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCP25 » 12.70 8.69 0.80 4.76 5.16
    WNMG080408FP KCU10 » 12.70 8.69 0.80 - -
    WNMG080408FP KT315 » 12.70 8.69 0.80 4.76 5.16
    WNMG-FP

203 Item(s)

per page

Set Descending Direction
Newsletter
Shop By

Currently Shopping by:

  1. Insert Type: Negative Remove This Item
  2. Type of Cut: Finishing Remove This Item
  3. Radius°: 0.80 Remove This Item
Clear All

Shopping Options

Manufacturer
  1. Kennametal (203)
ISO Insert Range
  1. Beyond Premium (203)
Material Machining
  1. Steel (160)
  2. Stainless Steel (70)
  3. Cast Iron (70)
  4. Aluminium (3)
  5. HRSA (71)
  6. Universal (57)
Insert Type
  1. Positive (556)
Type of Cut
  1. Fine Finishing (9)
  2. Wiper Finishing (30)
  3. Medium (243)
  4. Wiper Medium (19)
  5. Medium Roughing (2)
  6. Rough Positive (24)
  7. Rough (280)
  8. Rough Single Sided (40)
Tip Style
  1. CNGG (7)
  2. CNGP (4)
  3. CNMA (2)
  4. CNMG (25)
  5. DNGG (5)
  6. DNGP (6)
  7. DNMA (3)
  8. DNMG (46)
  9. SNGG (5)
  10. SNGP (2)
  11. SNMG (17)
  12. TNGG (5)
  13. TNGP (2)
  14. TNMG (30)
  15. VNGG (8)
  16. VNGP (2)
  17. VNMG (13)
  18. WNGG (2)
  19. WNMG (19)
Radius°
  1. 0.10 (18)
  2. 0.20 (33)
  3. 0.34 (2)
  4. 0.40 (177)
  5. 0.74 (6)
  6. 1.14 (7)
  7. 1.20 (71)
  8. 1.60 (12)
Newsletter
© FG Metcalfe & Son Ltd. All Rights Reserved.   |   Kennametal Distributor | Official SECO Distributor

Please wait...